NORYL™ Resin PX9406

Identification & Functionality

Additives Included

Flame Retardant,

Heat Stabilizer

Polymer Name

PPO/PS Alloy

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

Blends & Alloys

Features & Benefits

Labeling Claims

Bromine-free,

Chlorine-free,

No Added PFAS

Materials Features

Amorphous,

Dimensional Stability,

Flame Retardant,

Heat Stabilized,

High Hydrolytic Stability,

Low Moisture Absorption,

Low Shrinkage,

Low Specific Gravity,

Low Warpage,

No Added PFAS,

Non-Halogenated,

Non-brominated,

Non-chlorinated,

Unreinforced

Applications & Uses

Markets

Automotive & Transportation,

Building & Construction,

Consumer Goods,

Electrical & Electronics,

Industrial

Applications

Consumer Goods — Appliances & Electronics

Automotive & Transportation — Automotive

Fuel Systems

Building & Construction — Decorative Materials & Finishes

Artificial Turf

Electrical & Electronics — Devices & Assemblies

Consumer Electronics,

Displays

Consumer Goods — Lawn & Garden

Industrial — Military & Defense

Advanced Materials

Electrical & Electronics — Parts & Components

Connectors,

Switches & Relays

Plastics & Elastomers End Uses

Appliances,

Building Materials,

Cell Phones,

Commercial Appliance,

Computer Components,

Connectors,

Displays,

Electrical Components,

Electrical/Electronic Applications,

Filters,

Front Spoiler,

Garden Equipment,

Home Appliances,

Lawn Equipment,

Military Applications,

Pool Covers,

Side Spoiler,

Tablets,

Tarpaulins,

Turf Applications

Plastics & Elastomers Processing Methods

Injection Molding

Properties

Flame Rating

UL 94 5VA,

UL 94 V0,

UL 94 V2

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Stress (Yield, 50 mm/min) ¹¹	55	MPa	ISO 527
Tensile Stress (Yield, Type I, 50 mm/min) ¹¹	75	MPa	ASTM D638
Tensile Stress (Break, 50 mm/min) ¹¹	45	MPa	ISO 527
Tensile Stress (Break, Type I, 50 mm/min) ¹¹	55	MPa	ASTM D638
Tensile Strain (Yield, 50 mm/min) ¹¹	4	%	ISO 527
Tensile Strain (Yield, Type I, 50 mm/min) ¹¹	9.5	%	ASTM D638
Tensile Strain (Break, 50 mm/min) ¹¹	10	%	ISO 527
Tensile Strain (Break, Type I, 50 mm/min) ¹¹	18	%	ASTM D638
Flexural Stress (Yield, 2.6 mm/min, 100 mm span) ¹¹	111	MPa	ASTM D790
Tensile Modulus (at 1 mm/min) ¹¹	2400	MPa	ISO 527
Flexural Modulus (at 2.6 mm/min, 100 mm span) ¹¹	2640	MPa	ASTM D790
Flexural Stress (Yield, at 2 mm/min) ¹¹	70	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	2100	MPa	ISO 178
Ball Indentation Hardness (H358/30) ¹¹	95	MPa	ISO 2039-1

Physical Properties

	Value	Units	Test Method / Conditions
Specific Gravity ¹¹	1.11	—	ASTM D792
Water Absorption (at 23°C, 24hrs) ¹¹	0.06	%	ASTM D570
Mold Shrinkage (flow, 3.2 mm) ᵍ ¹¹	0.5 - 0.7	%	SABIC method
Mold Shrinkage (on Tensile Bar, xflow) ᵍ ¹¹	0.5 - 0.7	%	SABIC method
Mold Shrinkage (on Tensile Bar, flow) ᵍ ¹¹	0.5 - 0.7	%	SABIC method
Density ¹¹	1.1	g/cm³	ISO 1183
Water Absorption (at 23°C, saturated) ¹¹	0.2	%	ISO 62-1
Moisture Absorption (at 23°C, 50% RH) ¹¹	0.06	%	ISO 62
Melt Volume Rate (at 280°C, 5.0 kg) ¹¹	10	cm³/10 min	ISO 1133

Thermal Properties

	Value	Units	Test Method / Conditions
Vicat Softening Temperature (Rate B/50) ¹¹	125	°C	ISO 306
Vicat Softening Temperature (Rate B/50) ¹¹	150	°C	ASTM D1525
Heat Deflection Temperature (at 0.45 MPa, 6.4 mm, Unannealed) ¹¹	133	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 6.4 mm, Unannealed) ¹¹	122	°C	ASTM D648
Relative Temperature Index (Electrical) ᵖ ¹¹	110	°C	UL 746B
Thermal Conductivity ¹¹	0.22	W/m-°C	ISO 8302
Coefficient of Thermal Expansion (at 23°C to 80°C, flow) ¹¹	0.00007	1/°C	ISO 11359-2
Relative Temperature Index (Mechanical with impact) ᵖ ¹¹	105	°C	UL 746B
Coefficient of Thermal Expansion (at 23°C to 80°C, xflow) ¹¹	0.00009	1/°C	ISO 11359-2
Relative Temperature Index (Mechanical without impact) ᵖ ¹¹	110	°C	UL 746B
Ball Pressure Test (at 123°C to 127°C) ¹¹	Pass	—	IEC 60695-10-2
Ball Pressure Test (approximate maximum) ¹¹	125	°C	IEC 60695-10-2
Vicat Softening Temperature (Rate A/50) ¹¹	135	°C	ISO 306
Vicat Softening Temperature (Rate B/120) ¹¹	130	°C	ISO 306
Heat Deflection Temperature/Be (at 0.45MPa, Edgew 120*10*4, sp=100mm) ¹¹	125	°C	ISO 75/Be
Heat Deflection Temperature/Ae (at 1.8 Mpa, Edgew 120*10*4, sp=100mm) ¹¹	110	°C	ISO 75/Ae

Electrical Properties

	Value	Units	Test Method / Conditions
Volume Resistivity ¹¹	1.00E+15	Ω.cm	IEC 60093
Volume Resistivity ¹¹	2.00E+16	Ω.cm	ASTM D257
Surface Resistivity ¹¹	min. 1.E+16	Ω	ASTM D257
Dielectric Strength (in oil, at 3.2mm) ¹¹	16	kV/mm	IEC 60243-1
Dielectric Strength (in oil, at 3.2mm) ¹¹	18.8	kV/mm	ASTM D149
Relative Permittivity (50/60 Hz) ¹¹	2.7	—	IEC 60250
Relative Permittivity (50/60 Hz) ¹¹	2.57	—	ASTM D150
Relative Permittivity (1 MHz) ¹¹	2.6	—	IEC 60250
Relative Permittivity (1 MHz) ¹¹	2.49	—	ASTM D150
Dissipation Factor (at 50/60 Hz) ¹¹	0.0052	—	ASTM D150
Dissipation Factor (at 50/60 Hz) ¹¹	0.007	—	IEC 60250
Dissipation Factor (at at 1 MHz) ¹¹	0.003	—	IEC 60250
Dissipation Factor (at at 1 MHz) ¹¹	0.0026	—	ASTM D150
High Voltage Arc Track Rate (PLC) ¹¹	4	PLC Code	UL 746A
High Voltage Arc Track Rate (PLC) ¹¹	3	PLC Code	UL 746A
Surface Resistivity (ROA) ¹¹	min. 1.E+15	Ω	IEC 60093
Dielectric Strength (in oil, at 0.8mm) ¹¹	33	kV/mm	IEC 60243-1
Comparative Tracking Index (UL, PLC) ¹¹	2	PLC Code	UL 746A
Dielectric Strength (in oil, at 1.6mm) ¹¹	26	kV/mm	IEC 60243-1
High Ampere Arc Ignition (PLC 0) ¹¹	min. 0.75	mm	UL 746A
Hot Wire Ignition (PLC 0) ¹¹	min. 0.75	mm	UL 746A
Arc Resistance (Tungsten, PLC) ¹¹	6	PLC Code	ASTM D495

Impact Properties

	Value	Units	Test Method / Conditions
Izod Impact (Unnotched, at 23°C) ¹¹	1121	J/m	ASTM D4812
Izod Impact (Notched, at 23°C) ¹¹	160	J/m	ASTM D256
Instrumented Dart Impact Energy (Peak, at 23°C) ¹¹	42	J	ASTM D3763
Izod Impact (Notched, 80*10*4, at 23°C) ¹¹	12	kJ/m²	ISO 180/1A
Izod Impact (Notched, 80*10*4, at -30°C) ¹¹	7	kJ/m²	ISO 180/1A
Charpy Impact (at 23°C, V-notch Edgew 80*10*4 sp=62mm) ¹¹	11	kJ/m²	ISO 179/1eA
Charpy Impact (at -30°C, V-notch Edgew 80*10*4 sp=62mm) ¹¹	7	kJ/m²	ISO 179/1eA

Injection Molding

	Value	Units	Test Method / Conditions
Drying Temperature ⁷	105 - 110	°C	—
Drying Temperature ⁷	80 - 100	°C	—
Drying Time ⁷	3 - 4	Hrs	—
Drying Time ⁷	2 - 3	Hrs	—
Drying Time (Cumulative) ⁷	8	Hrs	—
Melt Temperature ⁷	280 - 300	°C	—
Melt Temperature ⁷	275 - 305	°C	—
Maximum Moisture Content ⁷	0.02	%	—
Nozzle Temperature ⁷	260 - 280	°C	—
Nozzle Temperature ⁷	275 - 305	°C	—
Front - Zone 3 Temperature ⁷	280 - 300	°C	—
Front - Zone 3 Temperature ⁷	265 - 305	°C	—
Middle - Zone 2 Temperature ⁷	260 - 280	°C	—
Middle - Zone 2 Temperature ⁷	255 - 300	°C	—
Rear - Zone 1 Temperature ⁷	240 - 260	°C	—
Rear - Zone 1 Temperature ⁷	245 - 295	°C	—
Hopper Temperature ⁷	60 - 80	°C	—
Mold Temperature ⁷	90 - 120	°C	—
Mold Temperature ⁷	70 - 100	°C	—
Back Pressure ⁷	0.3 - 0.7	MPa	—
Screw Speed ⁷	20 - 100	rpm	—
Shot to Cylinder Size ⁷	30 - 70	%	—
Vent Depth ⁷	0.038 - 0.051	mm	—

Flame Characteristics

	Value	Units	Test Method / Conditions
UL Recognized (94-5VA Flame Class Rating) ʳ	min. 2.5	mm	UL 94
UL Recognized (94V-0 Flame Class Rating) ʳ	min. 0.75	mm	UL 94
UL Recognized (94V-2 Flame Class Rating) ʳ	min. 0.4	mm	UL 94
Glow Wire Flammability Index (at 1 mm) ʳ	960	°C	IEC 60695-2-12
Glow Wire Flammability Index (at 1.5 mm) ʳ	960	°C	IEC 60695-2-12
Glow Wire Flammability Index (at 2.5 mm) ʳ	960	°C	IEC 60695-2-12
Glow Wire Flammability Index (at 3 mm) ʳ	960	°C	IEC 60695-2-12
Glow Wire Ignitability Temperature (at 1.0 mm) ʳ	775	°C	IEC 60695-2-13
Glow Wire Ignitability Temperature (at 1.5 mm) ʳ	775	°C	IEC 60695-2-13
Glow Wire Ignitability Temperature (at 2.5 mm) ʳ	775	°C	IEC 60695-2-13
Glow Wire Ignitability Temperature (at 3.0 mm) ʳ	775	°C	IEC 60695-2-13
UV-light (Water exposure/immersion) ʳ	F2	—	UL 746C
Glow Wire Flammability Index (passes at 960°C) ʳ	3.2	mm	IEC 60695-2-12
Oxygen Index (LOI) ʳ	36	%	ISO 4589

Note

• ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
• ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
• ʳ UL Ratings shown on the technical datasheet might not cover the full range of thicknesses, colors and regions. For details, please see the UL Yellow Card.
• ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
• ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

 

Regulatory & Compliance

Certifications & Compliance

UL 94

Packaging & Availability

Country Availability

Canada,

China (Mainland),

Mexico,

USA

Regional Availability

• Americas
• Asia
• Europe
• North America