EXTINITY® 0101-205

Identification & Functionality

Additives Included

Flame Retardant

Chemical Family

Polyolefins

Polymer Name

Polyolefin (unspecified)

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Basic Thermoplastics

Polyolefins

Features & Benefits

Labeling Claims

Halogen-free

Materials Features

Flame Retardant,

Low Smoke Emission,

Non Blooming,

Self-extinguishing Characteristics,

Slow Flame Propagation,

Superior Fire Performance

Applications & Uses

Markets

Electrical & Electronics

Applications

Electrical & Electronics — Wire & Cable

Jacketing & Insulation

Plastics & Elastomers End Uses

Jacketing

Plastics & Elastomers Processing Methods

Extrusion

Processing Conditions

EXTINITY® 0101-205 can be processed very easily on a wide range of commercially available extrusion equipment. It can withstand extrusion temperatures up to 425°F, but recommended temperatures are much lower. A typical temperature profile would

	Zone #1	Zone #2	Zone #3	Zone #4	Head	Die	Melt Temp
Celsius	149°-160°C	166°-177°C	177°-188°C	177°-188°C	171°-182°C	188°-199°C	182°-193°C
Fahrenheit	300°-320°F	330°-350°F	350°-370°F	350°-370°F	340°-360°F	370°-390°F	360°-380°F

It is recommended that EXTINITY® 0101-205 is pre-dried in a heated desiccant system prior to processing. As processes vary widely, please call for specific requirements for your application(s).

Properties

Mechanical Properties

	Value	Units	Test Method / Conditions
Coefficient of Friction vs. Metal - Kinetic	0.2	μk	ASTM D1894
Coefficient of Friction vs. Metal - Static	0.2	μs	ASTM D1894
Durometer (at 10 second)	67	Shore D	ASTM D2240
Elongation at Break	600	%	ASTM D638
Flexural Modulus (at 1% Secant)	400000	psi	ASTM D790
Izod, Notched: Room Temperature	6	ft-lbs/in	ASTM D256
Limiting Oxygen Index (at 23°C)	25	%	ASTM D2863
Steiner Tunnel (NFPA 101 Life Safety Code)	Class A	Fire Rating	ASTM E84
Taber Abrasion (1000-g/1000 cycles, H-18)	0.1	mg	ASTM D3389
Tensile Strength at Break	2700	psi	ASTM D638

Physical Properties

	Value	Units	Test Method / Conditions
Melt Flow Rate	0.2	g/10 min	ASTM D1238
Specific Gravity (at 23°C)	1.31	g/cm³	ASTM D792

Regulatory & Compliance

Certifications & Compliance

RoHS Compliant

Storage & Handling

Storage and Handling

SACO AEI Polymers recommends that EXTINITY® 0101-205 be stored in an ambient temperature range (40 to 80 degrees Fahrenheit), in its original container and away from moisture and high humidity.