Products

PEXIDAN® J/T is a low density flame-retardant XLPE system curable by moisture and consists of a silane pregrafted base compound A-3001 and a flame-retardant catalyst masterbatch CAT-012FR. Mixed and extruded in the proper proportions (60:40), the two components result in a material that is curable by exposure to 70-95°C hot water or even ambient moisture. PEXIDAN® J/T is designed to meet SAE J1128 standards for GXL, TXL and SXL type insulation. PEXIDAN® J/T is halogenated but is RoHS-compliant.

PEXIDAN® HF X/T is a unique low smoke halogen free flame retardant 90°C wet-rated XL-insulation system curable by moisture. It consists of a silane pre-grafted base compound SX651 and a catalyst masterbatch CM540U. Mixed and extruded in the proper proportions (95:5), the two components result in a material that is crosslinkable by exposure to 90°C hot water. PEXIDAN® HF X/T is REACH and RoHS-compliant and is UL 2885 certified to bear the Halogen Free “HF” designation. PEXIDAN® HF X/T is UL-bulletinized and wire made with this insulation system may be marked as Oil Resistant “PR I” and “PR II”, Gas & Oil Resistant “GR I” and “GR II”, “-40C” and “SUNRES” in all colors. This compound will meet a 105°C dry rating.

PEXIDAN® X/T-UV is a low density flame-retardant XLPE system curable by moisture and consists of a silane pre-grafted base compound A-3001 and a flame-retardant catalyst masterbatch CAT-005FR-UV1. Mixed and extruded in the proper proportions the two-component system results in a material that is curable by exposure to 70-95°C hot water or even ambient moisture. PEXIDAN® X/T-UV is halogenated but is RoHS-compliant. UL44 type insulation may be marked SUNRES or SR in all colors for sizes of 6 AWG and larger. UL4703 photovoltaic insulation may be marked SUNRES in all sizes and colors

EXTINITY® 0202-103 is a highly loaded masterbatch of brominated flame retardant pre-dispersed in a polypropylene carrier. It has been designed for use in variety of compounding applications. The pellet form makes the flame retardant easier to handle, more efficient, and can lower overall costs. The product is RoHS compliant.

EXTINITY® 0218-108 is a highly loaded flame-retardant concentrate that can be used for a variety of polystyrene-based applications. This concentrate has been designed to be used in High Impact Polystyrene, but is also effective in the entire styrenic family including general purpose polystyrene grades. EXTINITY® 0218-108 provides excellent flame-retardant performance while having minimal impact on mechanical properties and processibility. Varying the use rate of 0218-108 will permit the final compound to meet UL-94 V-0, V-1 or V-2 requirements.

EXTINITY® 0202-102 is 48% active flame retardant masterbatch additive dispersed in co-polymer polypropylene (coPP) carrier. EXTINITY® 0202-102 can be added to polypropylene base resin and achieve flame retardant performance to meet UL vertical burn performance (UL V-0 and UL V-2).

EXTINITY® 0101-108 is a halogenated, flame retardant compound specifically designed for use in plenum tube applications. This compound has good thermal stability and can be converted easily on standard processing equipment.

PEXIDAN® V/T-2 is a low density flame-retardant XLPE system curable by moisture and consists of a silane-grafted base compound A-3001 and a catalyst masterbatch CAT-045FR. Mixed and extruded in the proper proportions (50/50), the two components result in a material that is curable by exposure to hot water. PEXIDAN® V/T-2 is halogenated but is RoHS-compliant.

PEXIDAN® H/T is a low density flame-retardant XLPE system curable by moisture and consists of a silane pregrafted base compound A-3001 and a flame-retardant catalyst masterbatch CAT-012FR. Mixed and extruded in the proper proportions (67/33) this mixture results in a material curable by exposure to 70-95°C hot water or even ambient moisture. PEXIDAN® H/T is listed with CSA for AWM and CL1251, CL1252 & CL1503, and for UL AWM styles 3173 and 3321. See below for a more complete list of suitable AWM styles. PEXIDAN® H/T is halogenated but is RoHS-compliant.

PEXIDAN® V/T is a low density flame-retardant XLPE system curable by moisture and consists of a silanegrafted base compound A-3001 and a flame-retardant catalyst masterbatch CAT-010FR. Mixed and extruded in the proper proportions (50/50), the two components result in a material that is curable by exposure to hot water. PEXIDAN® V/T is halogenated but is RoHS-compliant.

EXTINITY® 0211-301 is a highly loaded antimony oxide concentrate in an EPDM carrier resin. The antimony oxide content in EXTINITY® 0211-301 is 80% by weight. All SACO AEI Polymers flame retardant concentrates are much more easily dispersed and therefore provide resultant materials with superior physical properties and flame resistance versus the use of additives in their naturally occurring state.

THERMODAN® HF TP 543CBU has been developed specially to comply with the requirements of BS7655- 6.1 for types LTS1, 3 and 4; EN 50290-2-27 and HD 604 for type HM2 and HD 604 for type HM4. Cables made with TP543C have complied with IEC 60332, part 22, 23 & 24 – 1 and 3 fire tests.

THERMODAN® HF TP521NU has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables made with TP521 have passed the 3m3 smoke density chamber test to IEC 61034-2.

THERMODAN® HF TP519CB has been developed specially to offer good processability, very fast extrusion process with very low die drool.

THERMODAN® HF TP519C has been developed specially to offer good processability, very fast extrusion process with very low die drool.

THERMODAN® HF TP832BUT has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables sheathed with TP832 have received LPCB approval.

EXTINITY® 0101-205 is a natural, non-halogen flame retardant RoHS polyolefin compound. It is designed for use in a wide variety of jacketing and coating applications. This compound has superior fire performance; including slow flame propagation, self-extinguishing characteristics, and low smoke production. EXTINITY® 0101-205 should be extruded with a screw configuration designed to optimize process conditions and throughput.

THERMODAN® HF TP812NU has been developed specially to offer good processability, fast extrusion process with very low die drool. TP812 is capable of meeting the flame retardant requirements of UL 1666, UL 1685, IEEE 1202, FT-4 in specific fiber optic constructions. It is also recognized as halogen free under UL 2885. It can be extruded using PVC extruders and screws. It possesses excellent tensile and flame retardant properties and meets the requirements of limited toxic and corrosive fume emission

THERMODAN® HF TP519CBU has been developed specially to offer good processability, very fast extrusion process with very low die drool.

THERMODAN® HF 0103-212 BK is a black, non-halogen thermoplastic wire and cable compound. It is designed for use in a wide variety of jacketing applications. This compound has superior fire performance; including slow flame propagation, self-extinguishing characteristics, and low smoke production. It is suitable for use as a jacket compound for cables recognized under UL 1277 tray cables and can pass flame retardant requirements set forth under UL 1685, IEEE 1202 and FT-4. THERMODAN® HF 0103-212 BK is recognized under UL 2885 as being halogen free. It is UV resistant and RoHS compliant.

THERMODAN® HF TP 543CBT has been developed specially to comply with the requirements of BS7655- 6.1 for types LTS1, 3 and 4; EN 50290-2-27 and HD 604 for type HM2 and HD 604 for type HM4. Cables made with TP543C have complied with IEC 60332, part 22, 23 & 24 – 1 and 3 fire tests.

THERMODAN® HF TP835 has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables made with TP835 have passed the 3m3 smoke density chamber test to IEC 61034-2.

THERMODAN® HF TP870NU has been developed specially to meet general requirements of BS 7655 Section 6.1 type LTS 1.

THERMODAN® HF TP812BU has been developed specially to offer good processability, fast extrusion process with very low die drool. TP812 is capable of meeting the flame retardant requirements of UL 1666, UL 1685, IEEE 1202, FT-4 in specific fiber optic constructions. It is also recognized as halogen free under UL 2885. It can be extruded using PVC extruders and screws. It possesses excellent tensile and flame retardant properties and meets the requirements of limited toxic and corrosive fume emission

THERMODAN® HF TP837B has been developed specially to offer good processability, very fast extrusion process with very low die drool.

THERMODAN® HF TP521 has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables made with TP521 have passed the 3m3 smoke density chamber test to IEC 61034-2.

THERMODAN® HF TP837NU has been developed specially to offer good processability, very fast extrusion process with very low die drool.

EXTINITY® 0102-104 is an extrusion grade UL V-0 recognized copolymer polypropylene based compound. The product features an excellent balance of properties including high impact strength, high elongation and good flexural and tensile properties. EXTINITY® 0102-104 has an all color UL V-0 rating. Custom colors can be provided. Typical applications including extruded sheet, rod and profiles.

EXTINITY® 0201-127 is a highly effective flame-retardant concentrate, which will provide excellent flame resistance properties. EXTINITY® 0201-127 easily disperses into a wide range of polyolefins through typical melt blending and is stabilized to impart thermal stability to the finished composition. EXTINITY® 0201-127 is non-blooming and has been designed to alleviate color shift problems when a flame retardant is used in colored films. The product is RoHS compliant.

EXTINITY® 0101-107 is a halogenated, flame retardant compound specifically designed for use in plenum tube applications. This compound has good thermal and ultraviolet stability and can be converted easily on standard processing equipment.

THERMODAN® HF TP832 has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables sheathed with TP832 have received LPCB approval.

THERMODAN® HF TP870 has been developed specially to meet general requirements of BS 7655 Section 6.1 type LTS 1.

THERMODAN® HF TP832NU has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables sheathed with TP832 have received LPCB approval.

SACO AEI Polymers THERMODAN® HF 0103-212 NT is a flame retardant non-halogen thermoplastic wire and cable compound. It is designed for use in a variety of jacketing applications. This compound has superior fire performance including slow flame propagation, low smoke production and low smoke corrosivity. THERMODAN® HF 0103-212NT can be used as a jacket compound on cables recognized under UL 1277 tray cables and can pass flame retardant requirements set forth under UL 1685, IEEE 1202 and FT-4. THERMODAN® HF 0103-212 NT is recognized under UL 2885 as being halogen free. It is natural in color and UV resistant.

EXTINITY® 0201-312 is a highly loaded antimony trioxide concentrate that can be used for a variety of applications including film, sheet, and extrusion coating. The content of antimony trioxide in EXTINITY® 0201-312 is 80%, by weight. Use of EXTINITY® 0201-312 eliminates the exposure hazards typically associated with handling antimony trioxide powder, since all of the antimony trioxide powder is dispersed, distributed and encapsulated in a LDPE carrier resin.

THERMODAN® HF TP870BU has been developed specially to meet general requirements of BS 7655 Section 6.1 type LTS 1.