Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Recommended Applications
- Extrusion: Film, Sheet, Tubing, Jacketing, Cast
- Molding: Injection, Thermoforming, Rotational
Properties
- Color
- Physical Form
- Appearance
- Free-Flowing Pellets
- Physical Properties
Value | Units | Test Method / Conditions | |
Density | 1.67 | g/cc | ASTM D792 |
Melt Flow Rate | 1 - 4 | g/10 min | ASTM D1238 Condition E |
Regulatory & Compliance
- Certifications & Compliance
- Regulatory Status
EXTINITY® 0201-125 does not carry any FDA/U.S.P. approval for food contact and may not be used for any application for implantation in the human body or where bodily fluids could potentially come in contact with the final product.
Technical Details & Test Data
- Processing Conditions
EXTINITY® 0201-125 can be processed using standard extrusion equipment at typical conditions for polyethylene. Specific processing conditions vary with application, equipment and usage rate.
- Technical Information
MVSS-302 Properties #1 #2 Resin Type .9 MI LDPE 1 MI LLDPE1 Film Thickness, mils 6 6 % 0201-125 8 8 Pass/Fail Pass Pass 1 Base resin was Butylene LLDPE that contains a high level of slip
NFPA-701 Small Scale Test Properties .9 MI LDPE 1 MI LLDPE1 % 0201-125 8 8 % Weight Loss 1.11 1.30 Lower Cone Length 5.0" 3.6" Upper Cone Length 6.85" 5.7" Time Flame Drip 0 0 Flame Time 0 0 Pass/Fail Pass Pass UL-94 VTM Performance Properties .9 MI LDPE 1 MI LLDPE1 Longest Single Burn 1 0 Total Burn Time 1 0 UL-VTM Rating1 VTM-0 VTM-0 1 This test has been performed internally at SACO AEI ® according to the UL-94 Very Thin Material Standard as set forth by Underwriters Laboratories Inc. This in no way constitutes that a UL rating has been given to this concentrate or any compound into which this concentrate is added. The above is data generated by SACO AEI Polymers for use as a general performance guideline only.
Storage & Handling
- Storage and Handling
SACO AEI Polymers recommends that EXTINITY® 0201-125 be stored in an ambient temperature range (40 to 80 degrees Fahrenheit). Although this product is not hygroscopic, it is recommended keeping EXTINITY® 0201-125 away from excessive moisture and extremely high humidity environments