Products

Crystic® Polyester Resin 272E is an isophthalic polyester resin designed for use in hot climates. It is used in high-performance applications such as pipes, tanks, and ducting. This versatile resin is suitable for use in filament winding, pultrusion, centrifugal molding, or contact molding processes. It has a 25-minute gel time.

Crystic® Laminating Resin 4252.4 TEPA V01 is an orthophtalic, pre-accelerated, low styrene emission (LSE), thixotropic unsaturated polyester resin. This product can be used for spray application or for contact molding when fast mold turn-around or thick laminates are required. It is an incredibly versatile laminating resin, and its excellent mechanical properties make it ideal for bonding on acrylic sheets for sanitary use.

Crystic® Orthophthalic Topcoat 402PA is a pre-accelerated topcoat with excellent scuff resistance, designed for use in general purpose GRP moldings. It is based on a high quality orthophthalic unsaturated polyester resin and is suitable for all general molding requirements. The product has been formulated for brush application.

Crestapol® 1216 Urethane Acrylate Resin is a tough, low-viscosity resin with a rapid cure. This product can be highly filled to achieve a high level of fire and smoke performance (ASTM E84 Class 1). It is designed for use in hand lamination applications.

Crystic® Fire Retardant Resin 1355PA is a pre-accelerated, filled, fire-retardant polyester resin that has been designed for contact molding applications. It has been formulated as an inexpensive resin and wets out the reinforcement rapidly. This product is supplied in a restricted range of colors.

Crystic® Low Styrene Gelcoat 76PA FR is a low styrene content, pre-accelerated, fire retardant gelcoat developed to have very low surface spread of flame. It has been formulated for brush application and can be used for building applications, vehicle bodies and general industrial work.

Crystic® Thixotropic Resin VE676T is a thixotropic version of Crystic® VE676, an epoxy bisphenol A based vinyl ester resin. This product is suitable for hand lay-up, spray lay-up, and similar processes. Thixotropic additives provide applied material sag resistance to vertical surfaces. 

Crystic® Polyester Resin 272 is an isophthalic polyester resin. It is recommended for use in high-performance applications using filament winding, pultrusion, and centrifugal or contact molding processes. The fully cured laminates have high mechanical strength and excellent strength retention in wet environments at temperatures up to 60ºC.

Crystic® Polyester Resin 491PA is a pre-accelerated, thixotropic, isophthalic polyester resin with good water and chemical resistance properties. It is versatile and suitable for performance boat hulls destined for use in warm or tropical areas. This product is also suitable for the manufacture of chemical plants, tanks, pipes, and chemical containers. It has a 12-minute gel time.

Crystic® Vinylester Resin VE673 is a low-viscosity, non-accelerated, non-thixotropic, high-HDT epoxy novalac vinyl ester resin with outstanding chemical resistance to a wide range of substances at room temperature and elevated temperatures. This product is suitable for laminating and filament winding. It has a 16-minute gel time and can be used for chemical resistance, building and construction, and industrial applications.

Crystic® Laminating Resin 471PALV is a pre-accelerated, low-viscosity polyester resin with rapid hardening characteristics. This laminating resin combines rapid impregnation of reinforcements and fillers with a very short mold release time and is suitable for hand-laying or spray applications. It has an 8-minute gel time, Lloyds approval, and is suitable for use in marine, transportation, building and construction, and industrial applications.

Crestamould® Resin 474PA is a thixotropic, pre-accelerated orthopthalic polyester resin with good heat and chemical resistance properties. This product is suitable for the construction of tanks, pipes, and fume stacks to operate in environments where heat and chemical resistance are both required. A non-thixotropic, non-accelerated version of this resin is available as Crystic® 198.

espol™ 19.00 is a non-accelerated orthophthalic polyester resin suitable for the resin transfer molding (RTM) process. It has been specifically formulated for non-critical and general-purpose applications where high reactivity is desirable. It is designed for laminates that need a very fast cure under closed-mold conditions.

espol™ 30.00 is a non-accelerated isophthalic polyester resin that rapidly wets out reinforcements. It has a medium viscosity and reactivity and uses superior glycols compared to general-purpose resins, giving it good mechanical and chemical resistance. It is suitable for the fabrication of chemical tanks, industrial applications, and marine applications.

espol™ 12.23 is a non-accelerated orthophthalic polyester resin that rapidly wets out reinforcements. It is a general-purpose resin specifically designed for non-critical and general-purpose applications. It is thixotropic by nature and has anti-sagging properties. It is designed for hand laminating, spray-up, and casting applications.

espol™ 41.00 is a non-accelerated isophthalic neopentyl glycol (ISO-NPG) polyester resin suitable for aggressive marine applications. The resin has been approved by the IRS (Indian Registrar of Shipping) for usage on ships and other marine transport vehicles. It has been specifically formulated for resistance to seawater, offering superior osmotic stability alongside excellent mechanical properties.

Crestamould® RTR 4010PA is a new, improved rapid tooling resin which incorporates better handling properties, lower viscosity, improved shrinkage control and is catalysed with standard MEKP catalyst. It is a thixotropic, filled, low profile resin which helps to achieve faster mold making and eliminates surface distortion. This product was formulated for hand-lay mold making applications.

Crystic® Primecoat is a high build, polyester coating material which allows the rapid surfacing of patterns constructed from wood, MDF, GRP etc. It can be applied wet-on-wet up to a thickness of 1.5mm in one operation without sagging or draining from vertical surfaces. The material hardens rapidly and when cured can be easily sanded to a very smooth finish which can be polished to a surface glossy enough for many applications.

espol™ 17.00 is a non-accelerated orthophthalic polyester resin that rapidly wets out reinforcements. It has been specifically formulated for rooflite applications and offers excellent light transmittance and weather resistance. Additionally, it provides excellent mechanical strength and rigidity, as well as long-term durability. This resin is commonly used in the production of greenhouses, translucent roofing, domes, and architectural panels.

espol™ 12.10 is a non-accelerated orthophthalic polyester resin with low viscosity that rapidly wets out reinforcements. It has been specifically formulated for non-critical and general-purpose applications. This resin is formulated as an extra-clear grade, providing excellent mechanical strength, rigidity, and long-term durability. It is designed for hand lamination, spray-up, RTM, and casting applications.

espol™ 31.00 is a non-accelerated terephthalic acid-based polyester resin that rapidly wets out reinforcements. It has a medium viscosity and reactivity and exhibits good mechanical and electrical properties, along with good chemical resistance compared to general-purpose resins. It is designed for hand laminating, spray-up, and casting applications.

espol™ 26.00 is a non-accelerated orthophthalic polyester resin that rapidly wets out reinforcements. It is formulated as a pultrusion grade, providing fast line speeds for products requiring high temperature exposure and a good finish. It can be used with all types of glass fibers, such as chopped strand mat, woven roving, and multi-axials. Typical applications include channels, angles, ladders, and special panels for appliances.

Crestafire® P1-2002PA is a pre-accelerated thixotropic polyester resin with fire retardant properties, making it suitable for applications where fire resistance is a consideration. The product is suitable for spray and hand lamination application techniques. It requires only the addition of a catalyst to start the curing reaction.

Crestafire® P1-3001PA is a filled, pre-accelerated, fire retardant unsaturated polyester resin. It incorporates a selected grade of alumina trihydrate (ATH) which makes it suitable to produce laminates where excellent resin flow, fire retardancy, and low levels of smoke and toxic fumes are required. It is halogen-free and does not contain heavy metals.

espol™ 12.20 is a non-accelerated orthophthalic clear polyester resin formulated with medium reactivity for specialized casting processes. It has been specifically designed for casting and cold press molding applications associated with quartz agglomerated blocks and sheets. End products made using espol™ 12.20 have excellent strength, rigidity, water resistance, and long-term durability.

espol™ 29.00 is a non-accelerated orthophthalic polyester resin that rapidly wets out reinforcements. It is formulated as a superior grade, especially for automotive applications intended for a Class-A surface finish. It is designed for hand lamination, spray-up, and casting as manufacturing processes. It can be used with all types of glass fibers, such as chopped strand mat, woven roving, and multi-axials.

espol™ 12.05 is a non-accelerated orthophthalic polyester resin with low viscosity that rapidly wets out reinforcements. It has been specifically formulated for non-critical and general-purpose applications, providing excellent mechanical strength, rigidity, and long-term durability. It can be used with all types of E-glass, such as chopped strand mat, woven roving, and multi-axial fibers.

espol™ 39.00 is a novalac-based epoxy vinyl ester resin designed to provide exceptional mechanical and chemical resistance properties at high operating temperatures. Its novolac-based backbone imparts it with excellent resistance to aggressive chemicals and oxidizing environments. It brings in enhanced durability, showing excellent long-term retention of strength and toughness at elevated temperatures.

espol™ 12.00 is a non-accelerated orthophthalic polyester resin that rapidly wets out reinforcements. It is a general-purpose resin that has been specifically designed for non-critical and industrial applications. However, it is not suitable for boat construction, chemical resistance, or moldings in contact with food products.

Crystic® Orthophthalic Topcoat 407PA White is a pre-accelerated Flowcoat with excellent scuff resistance, designed for use in general purpose GRP moldings. It is based on a high quality orthophthalic unsaturated polyester resin and is suitable for all general molding requirements. This product is pigmented using a highly UV resistant grade of titanium dioxide. It has been formulated for brush application.

espol™ 12.51 is a non-accelerated orthophthalic polyester resin that rapidly wets out reinforcements. It has been specifically formulated for non-critical and general-purpose applications where high reactivity is desirable, making it ideal for laminates that require very fast curing. It provides excellent mechanical strength, rigidity, and long-term durability.

espol™ 12.01 is a pre-accelerated orthophthalic polyester resin that rapidly wets out reinforcements. It is a general-purpose resin that has been specifically designed for non-critical and industrial applications. It is not suitable for boat construction, chemical resistance, or moldings in contact with food products. is a general-purpose pre-accelerated orthophthalic polyester resin that quickly wets out reinforcements, making it ideal for non-critical and industrial applications. However, it is not recommended for use in boat construction, chemical-resistant applications, or molding products that come into contact with food.

espol™ 38.05 is a non-accelerated, non-thixotropic vinyl ester resin that rapidly wets out reinforcements. It exhibits excellent resistance to a wide range of corrosive chemical environments at room and elevated temperatures. It is specifically designed for pultrusion applications. Due to its high elongation and flexibility, espol™ 38.05 can also be used in tooling and mold making.

Crystic® Polyester Resin 196E is a non-accelerated, non-thixotropic, orthophthalic polyester resin for use in hot climates. It has Lloyd's approval and can be used in marine, transportation, building and construction, and industrial applications. This product is particularly suitable for filament winding and pultrusion processes.

Crystic® Thixotropic Resin LS 451PA is a pre-accelerated thixotropic resin. It is suitable for brush or spray application in the marine industry or general molding market. This product has reduced styrene emissions, typically 20 - 30% lower than conventional lower styrene resins. It has Lloyd's approval but is also suitable for use in building and construction, transportation, and industrial applications. This product has a 20-minute gel time.

Crystic® Polyester Resin R115PA is a general purpose thixotropic, pre-accelerated, orthophthalic, unsaturated polyester resin. It has a 10-minute gel time and is suitable for use in buidling and construction, transportation and industrial applications by hand lay up or by spray application for the production of most glass reinforced laminates.