Products

POLYSHIELD HT™ TRAFFIC COAT is a state-of-the-art, high-performance, spray-applied, plural-component, purepolyurea elastomer. This system is based on amine-terminated polyether resins, amine chain extenders, and MDIprepolymers. It provides a flexible, resilient, tough, monolithic membrane with water and chemical resistance. Witha 1 minute 30 second tack time, it is excellent for projects that require a broadcast aggregate and/or require a smoothsurface.

AQUASEAL™ HI RISE X5 (X5) is a unique elastomer that expands approximately 500% of its original volume duringthe spray application. In place yield is ±80 mils per gallon per 100 sq. ft. when sprayed through a SPI LOCK N LOAD™gun. As X5 rises, it bridges substrate imperfections to virtually eliminate blowholes and pinholes when applied toporous surfaces such as vertical poured concrete and concrete masonry units (cmu). X5 is formulated with the “ULTRABOND™” molecule therefore is self-priming in most instances.

POLYSHIELD HT™ SLOW FC is a state-of-the-art, high- performance, sprayed, plural-component, pure polyurea elastomer,that is compliant with FDA 21 CFR 175 300 (c)/ (d) high temperature, heat-sterilized, non-acid aqueous food contact.This system is based on amine-terminated polyether resins, amine chain extenders and prepolymers. It provides aflexible, tough, resilient monolithic membrane with water and chemical resistance.

POLYSHIELD HT™ 100F is a fast-set, high performance, spray-applied, plural component, pure polyurea elastomer. This system is based on amine-terminated polyether resins, amine chain extenders, and prepolymers. It provides a cost effective flexible, tough, resilient monolithic membrane with water and chemical resistance.

AQUASEAL™ HI RISE X3 is a unique elastomer that expands approximately 300% of its original volume duringthe spray application. In place yield is ±50 mils per gallon per 100 sq. ft. when sprayed through a SPI LOCK N LOADTMgun. As X3 rises, it bridges substrate imperfections to virtually eliminate blowholes and pinholes when applied toporous surfaces such as vertical poured concrete and concrete masonry units (cmu). X3 is formulated with the “ULTRABONDTM” molecule therefore is self-priming in most instances.

ELASTAFLEX™ CR is specifically created as a secondary containment liner for hydrocarbons including crude oil,diesel fuel, gasoline, and alcohols. This very economical polyurea exhibits very high tensile strength and elongation.ELASTAFLEX™ CR is a unique blend of aliphatic and aromatic polymer chemistry with greater color/gloss retentionand is more UV resistant than aromatic polyureas. Unlike most spray-applied polyureas, ELASTAFLEX™ CR isavailable with SPI’s cutting-edge ULTRA BONDTM technology. SPI’s advanced ULTRA BONDTM chemistry is coined “theduct tape molecule”. ULTRA BONDTM has the unique advantage of adhering to most properly prepared organic andinorganic (new and aged) surfaces without requiring a primer. Like duct tape, ELASTAFLEX™ CR with ULTRA BONDTMgains adhesion over time.