Products

UPI Sealant Products E2U 100% Solids Epoxy is a 2-component modified cycloaliphatic high-performance epoxy. It features solvent-free low odor and high gloss floor coating. It is applied at 12-30 mil for high industrial and commercial demands.

Super 20™ is a single-component, color-enhancing, high gloss sealer developed for concrete or any cement-based product. It is vapor permeable, yet reduces the penetration of fluids into the surface.

Trans4loor™ Metallic is a two-component, solvent-free, epoxy/amine system designed specifically for applications over concrete floors and countertops where maximum durability and chemical resistance are required within a decorative metallic system. This high gloss material is available in a solid color base coat and a clear formula where metallic pigments are added.

SureFinish™ is an industrial floor finish providing exceptional performance and adherence to both resilient and non-resilient hard surface interior flooring. It may be applied like a conventional floor finish to terrazzo, quarry tile, brick, slate, unglazed ceramic tile, mexican tile, and stone surfaces.

UPI Sealant Products ColorTec 600WB Pigmented Water Based Epoxy is a dual-component 52% solids, low VOC pigmented floor coating system that is used in a wide variety of applications such as durable pigmented coating for both new and old interior concrete floors, primer coat, and binder for DK Flakes and DK Metallics. It has a high loading of SureCrete pigments to achieve the preferred substrate hide and tint uniformity.

HS 300™ Premium Acrylic Sealer is a premium, high-performance, single-component silane, acrylic sealer designed for overlays or other cement-based products. It is vapor permeable and readily applies outside.

ColorTec Acrylic™ Pigmented Solvent Acrylic Sealer is a single-component, color sealer developed for SureCrete overlays or any cement-based product. It is vapor permeable, yet reduces the penetration of fluids into the surface. It will enhance the beauty, improve stain and abrasion resistance for driveways, garage floors, patios, walkways, pool decks, stucco, and concrete block. It is specifically formulated for UV stability, will not blush, and retain long gloss retention.

UPI Sealant Products HS 300LV Premium Low VOC Acrylic is a premium, high-performance, single-component silane, acrylic 30% solids, low VOC, sealer designed for SureCrete overlays or other cement-based products. It is vapor permeable and readily applies outside. It is specially formulated for extreme climates where a low VOC sealer is required.

UPI Sealant Products CS 250LV Low VOC Cure & Seal is a finishing membrane that enhances the curing process of freshly placed concrete and provides protection simultaneously. It forms a water retentive film that beneficially restricts moisture loss allowing concrete to reach its optimal cure and hardness, providing an economical alternative to costly, time-consuming water curing.

UPI Sealant Products HS 200LV Premium Low VOC Acrylic is a premium, high-performance, single-component silane acrylic, sealer designed for concrete or any cement-based product. It is vapor permeable and readily applies outside. It is specially formulated for extreme climates where a low VOC sealer is required.

DK 500™ 100% Solids Epoxy Clear Coat is a 2 component 100% solids, zero VOC floor coating system that is used in a wide variety of applications such as, thick-build clear coat for a host of decorative concrete systems, Dura-Kote Flake, Dura-Kote Metallic systems, and in certain applications as a primer coat and/or binder coat.

ColorTec 500™ Pigmented 100% Solids Epoxy is a 2-component 100% solids, zero VOC colored floor coating system that is used in a wide variety of applications such as high build pigmented coat for a host of decorative concrete systems, primer coat and binder coat for DK Flakes and DK Metallics.

HS 200™ Premium Acrylic Sealer is a premium, high-performance, single-component silane, acrylc sealer designed for concrete or any cement-based product. It is vapor permeable and readily applies outside.

UPI Sealant Products CS 250 25% Solids Cure & Seal is a 25% solids finishing membrane that enhances the curing process of freshly placed concrete and provides protection simultaneously. It forms a water retentive film that beneficially restricts moisture loss allowing concrete to reach its optimal cure and hardness, providing an economical alternative to costly, time-consuming water curing.