Products

Toray EX-1515 cyanate ester prepreg resin system is unique in the industry in that it is able to achieve an extremely high level of cure conversion after a 121°C (250°F) cure. This level of conversion provides optimal mechanical properties, high radiation resistance, low moisture absorption, and low outgassing while retaining unparalleled toughness, a low 118°C (244°F), stress-free temperature, and long out time. The resin system excels in its ability to resist microcracking, even when subjected to thermal cycling and high levels of radiation exposure. EX-1515 also displays low dielectric and low loss values which makes it outstanding for radome and antenna Applicationss. EX-1515 can be post cured, freestanding, to increase thermal performance for temperature-critical structures. 107–121°C (225–250°F) Cure Toughened Cyanate Ester

Toray TC410 is Toray’s newest high performance cyanate ester resin system designed specifically for the latest generation of radomes and satellite structures. TC410 is unique in that it allows for low stress cures at 121°C (250°F) while achieving extremely low moisture absorption and high conversion levels. The lower cure temperature allows for lower stress in part fabrication. TC410 possesses all the key attributes for satellite use with good resistance to atomic radiation, low microcracking, and excellent resistance to process moisture. TC410 possesses low dielectric and loss tangents for radome usage. 121°C (250°F) Cure Toughened Cyanate Ester Resin System

Toray Toray AmberTool® HX42 is a low temperature curing epoxy composite tooling prepreg. After a suitable post cure, an end use temperature of 190°C (374°F) is achieved. Toray AmberTool® HX42 is an exceptional and very well proven system that exhibits a high end use temperature and extended out life. 50–75°C (122–167°F) Low Temperature Curing Epoxy Tooling Prepreg.

Toray BT250E-1 resin system is a 121°C (250°F) cure epoxy prepreg system with excellent toughness and strength. It provides an outstanding surface finish under vacuum-bag/oven-cure only. The resin system, which is self-adhesive to honeycomb and foam core, is MIL-R-9300 qualified and makes a great choice for many Applicationss in the low-tomedium-service temperature range.

Toray Toray Cetex® TC910 is a thermoplastic composite using a polyamide 6 (PA6) matrix resin. This product provides excellent mechanical performance at a good price-to-weight ratio. It features high strength and wear resistance and performs well at elevated temperatures. TC910 is also resistant to solvents. As a result of these attributes, Toray Cetex® TC910 is commonly used in a variety of automotive and transportation Applicationss. Secondary details in the final part may be injection overmolded using injection-grade polyamides. Toray Cetex® TC910 is available in glass or carbon reinforced UD tapes. Nylon 6-based Thermoplastic Composite. Indefinite at 25°C (77°F).

Toray E745 is a 135°C (275°F) cure toughened epoxy component prepreg. E745 has been developed for impact structures and other mechanically demanding structural Applicationss. E745 can be impregnated into a range of fiber and fabric types. 135°C (275°F) Cure Mid Temperature Curing Toughened Epoxy Component Prepreg.

Toray Toray Cetex® MC1322 New is a thermoplastic bulk molding compound (BMC) fabricated from Toray Cetex® TC1320 PEKK thermoplastic uni-directional tape. It is based on a semi-crystalline PEKK thermoplastic polymer and as such has excellent resistance to chemicals and solvents, while also offering excellent elevated service performance, good hot/ wet strength, and offers superior performance in flammability properties. Toray Cetex® MC1322 PEKK is offered on standard-modulus carbon fibers in lengths of up to 25.4 mm (1”). Intermediate modulus fibers and alternative lengths may also be available. Thermoplastic bulk molding compound allows part fabrication with short cycle times. This product also allows complex shapes to be made with varying wall thicknesses, integrated ribs, and reinforcing structures. Compression molded parts are used to replace metal parts for weight savings.

Toray Toray AmberTool® HX50 is a low temperature curing epoxy composite tooling prepreg. After a suitable post cure, an end use temperature of 180°C (356°F) is achieved. Toray AmberTool® HX50 achieves an excellent surface finish for small to medium sized autoclave tooling. 40–55°C (104–131°F) Low Temperature Curing Epoxy Tooling Prepreg.

Toray Toray Cetex® MC1200 is a thermoplastic bulk molding compound (BMC) based upon Cetex TC1200 PEEK thermoplastic uni-directional tape. Toray Cetex® MC1200 is offered on standard-modulus fibers lengths of up to 25.4 mm (1”). Intermediate modulus fibers and alternative lengths may also be available. Thermoplastic bulk molding compound allows part fabrication with short cycle times. This product allows complex shapes to be made with varying wall thickness, integrated ribs, and reinforcing structure. Many composite compression molded parts are used to replace metal parts for weight savings or they replace plastic injection molded parts where higher strengths or stiffness are required. Toray Cetex® MC1200-4A, PEEK, 25.4 mm (1”) represents standard-modulus AS-4 fiber chopped to 25.4 mm (1”) in length.

Toray Toray Cetex® TC960 is a polypropylene-based thermoplastic uni-directional tape. It is part of Toray’s CFRT® (continuous fiber reinforced thermoplastic) line of industrial thermoplastic composites. This thermoplastic composite is designed for Applicationss that require high impact resistance, but where cost is a factor. The impact toughness of glass fiber/ polypropylene composites make them ideal for use in truck bodies, vehicles, and vehicle enclosures. Polypropylene Thermoplastic Composite. Indefinite at 25°C (77°F).

Toray RS-36 is an advanced modified epoxy system for structural composite Applicationss. RS-36 offers an excellent balance of mechanical properties, low moisture absorption, high glass transition temperatures, and a range of processing options. A higher Tg version, RS-36-1, with similar mechanical properties, is available. 177°C (350°F) Cure Epoxy Resin System

Toray’s TC250 offers an excellent balance of toughness, mechanical properties, and hot/wet performance. It is easily processed via vacuum bag/oven, autoclave, or press curing operations. Although TC250 is a 130°C (265°F) cure system, it can be post cured for a higher dry and wet Tg, which enhance the product’s elevated temperature performance. TC250 can also be cured or freestanding post cured to 177°C (350°F) to increase its high temperature performance. TC250 is available with virtually all fiber reinforcements in uni-directional tape, slit unidirectional tape, woven, and non-woven prepreg forms. 130°C (265°F) Cure, Toughened Epoxy Resin System

Toray Toray Cetex® TC1200 is a high-end thermoplastic composite material, utilizing the semi-crystalline thermoplastic polymer PEEK for excellent mechanical performance. The long-standing use of PEEK in demanding Applicationss such as aerospace and cutting edge medical Applicationss proves its benefits and versatility. As a composite material it offers outstanding mechanical performance, also at elevated temperatures. The semi-crystalline nature of the resin ensures an excellent resistance to chemicals and solvents, and an equally superior performance in flammability properties. Toray Cetex® TC1200 is available in UD tape, fabric prepreg, and RTL formats (reinforced thermoplastic laminate). RTLs can be equipped with lightning strike protection, and carbon reinforced RTLs can be supplied with a thin glass top layer to protect a partly metallic assembly against galvanic corrosion. Glass scrim is also applicable in structures made from UD tape. PEEK (PolyEtherEtherKetone) Thermoplastic Resin System.

BTCy-1 is a 177°C (350°F) curing cyanate ester and is an industry standard for use on satellite structure and radomes. 177°C (350°F ) Cure Cyanate Ester.

Toray Toray AmberTool® TC40 is a BMI resin that which provides excellent elevated temperature properties and processability. Toray AmberTool TC40 has been designed for high temperature tooling Applicationss. BMI Tooling Prepreg.

Toray BTCy-2 is our lowest dielectric cyanate ester prepreg resin system. This resin system is valued in high-energy microwave Applicationss due to the low loss tangent. 177°C (350°F) Cure Cyanate Ester

Toray Toray Cetex® TC1000 Premium is a high-end thermoplastic composite, utilizing the amorphous PEI polymer for outstanding toughness and an inherently outstanding fire, smoke, and toxicity performance (< 15/15 OSU). With over 30 years in flight, Toray Cetex® TC1000 Premium is utilized in a consistently growing number of Applicationss. The material has gained a wide array of qualifications at Airbus, Boeing, and many other airframe OEMs. Compared to its semi-crystalline counterparts, Toray Cetex® TC1000 Premium can be used to achieve even shorter cycle times in part production. The material exhibits a superior bondability, which makes it very suitable for hybrid assemblies consisting of different materials. Toray Cetex® TC1000 is available as a UD tape and as a fabric prepreg, but is typically supplied in pre-consolidated reinforced thermoplastic laminates (RTLs) of varying thicknesses. Laminates and prepregs are available in black, cream white, gray, and natural (amber) resin colors. PEI (PolyEtherImide) Thermoplastic Resin System.

Toray Toray Cetex® TC925 FST is a value-oriented engineered thermoplastic composite, utilizing a polycarbonate compound for impact toughness and good fire resistance. Although Toray Cetex® TC925 FST is a cost-effective material to begin with, the real cost saving on a part level lies in streamlining production with < 3 minutes per automated process cycle, cutting out most manual postprocessing and potential for error. Additionally, this material offers a very good surface quality. Toray Cetex® TC925 FST is available as a fabric prepreg, but is typically supplied in pre-consolidated reinforced thermoplastic laminates (RTLs) of varying thicknesses and lay-ups. Laminates from natural color resin have a translucent quality. A white color option is also available. PolyCarbonate (PC) Thermoplastic Resin System.

Toray MS-1A is a high performance carbon fiber/epoxy resin compression molding system based on high-modulus carbon fiber. MS-1A compression molding compound yields unparalleled stiffness and high strength. MS-1A is qualified for space Applicationss. 138°C (280°F) Cure High-Modulus Compression Molding System

Toray TC346 is a high temperature epoxy component prepreg developed for structural Applicationss within Formula 1 and high performance automotive. Toray TC346 is designed to deliver enhanced compression properties to manufactured parts while maintaining a good fracture toughness. When exposed to elevated temperature environments, TC346 composites demonstrate excellent retention of mechanical performance.

Toray BT250E-6 resin system is a 121°C (250°F) cure epoxy prepreg with excellent strength and stiffness. It provides an outstanding surface finish under vacuum bag/oven cure. BT250E-6 has an FAA-conformed database on carbon IM-7 uni-directional tape, S2-glass, and AS-4C plain weave.

Toray Toray MicroPly™ SF-4 is a BMI syntactic film that provides excellent elevated temperature properties and compatible to Toray RS-8HT. Toray MicroPly™ SF-4 is available in unsupported or supported continuous film form in various thicknesses from 0.25–2.5 mm (10 mils– 100 mils). Toray MicroPly™ SF-4 has been evaluated and qualified in aerospace structures. 204°C (400°F) Cure BMI Syntactic Film. Film to 127 cm (50”) wide.

Toray Toray Cetex® MC1100 PPS is a thermoplastic bulk molding compound (BMC) based upon Toray Cetex® TC1100 PPS thermoplastic uni-directional tape. Toray Cetex® MC1100 PPS is offered on standard-modulus fibers in lengths of up to 25.4 mm (1”). Intermediate-modulus fibers and alternative lengths may also be available. Thermoplastic bulk molding compound allows part fabrication with short cycle times. Many composite compression molded parts are used to replace metal parts for weight savings or replace plastic injection molded parts where higher strengths or stiffness are required. Toray Cetex® MC1100-4A, PPS, 25.4 mm (1”) represents standard-modulus AS-4 fiber chopped to 25.4 mm (1”) in length.

Toray E721-FR is a modified epoxy resin system of medium viscosity for cures at 120°C (248°F), pre-impregnated into high performance fibers such as carbon, glass, and aramid. Toray E721-FR offers excellent structural properties, flame retardancy, and exceptional toughness allowing direct lamination to honeycomb without the use of resin film. Toray E721-FR is designed for structural Applicationss in the motor racing, marine industries, and for a wide range of engineering Applicationss. If fire-retardant properties are not required, consult separate data sheet for Toray E720.

Toray E731 is a toughened epoxy resin system designed to deliver enhanced resin clarity for cosmetic components within high performance automotive. The resin formulation ensures that components are free from white-spots and exhibit high clarity.

Toray C640 is a cyanate ester resin system suitable for curing between 70°C (158°F) and 135°C (275°F). The medium viscosity resin is pre-impregnated into high-performance fibers such as carbon, glass and aramid. The system is capable of withstanding very high temperatures and is inherently flame-retardant. After a suitable post cure, the glass transition temperature can be increased to as high as 335°C (635°F).

Toray TC420 is a flow-controlled high temperature cyanate ester resin, toughened to resist microcracking. TC420 is specifically formulated to facilitate production of large out-of-autoclave structures. It can act as a self-adhesive system and is resistant to microcracking. This resin represents a new family of next generation high temperature resins, film adhesives, syntactic paste and expanding foams for ultra-high temperature conditions. TC420 is easy to process, and yields low void laminates with a flexible cure cycle under vacuum-only pressure. This system is also autoclave processable. TC420 is an attractive alternative to bismaleimide (BMI) and polyimide resins.

Toray Toray AmberTool® HX56 is a low temperature curing epoxy composite tooling prepreg. After a suitable post cure, an end use temperature of 180°C (356°F) is achieved. Toray AmberTool® HX56 achieves an excellent surface finish for small to medium sized autoclave tooling.

Toray TC890 high temperature polyimide prepreg system utilizes PROOF Research Advanced Composites Division 900HT resin system. TC890 is a high temperature, polyimide-based thermoset prepreg with outstanding dry property retention at 343°C (650°F), wet service property retention at 288°C (550°F), and short-term and intermittent service temperature capability to 427°C (800°F). TC890 has been successfully demonstrated in short term, transient heating Applicationss to temperatures as high as 1300°F. TC890 is an excellent non-MDA replacement for high temperature PMR-15 Applicationss. TC890 prepreg system is easily processable and thermally stable, exhibiting the highest glass transition temperature of commercially available structural matrices. This system displays exceptional toughness, excellent dielectric properties, and low toxicity. High Temperature Polyimide

Toray E750 is a toughened epoxy component prepreg developed for structural Applicationss within Formula 1 and high performance automotive. Toray E750 allows curing from 80°C (176°F) to 180°C (356°F) and can be impregnated into a range of fiber and fabric types.

Toray TC380 sets a new benchmark for toughened epoxy prepreg systems. TC380 is extremely tough with an excellent balance of OHC, OHT, CAI, and GIC/GIIC properties. It features low moisture absorption with outstanding hot/wet mechanical properties to 121°C (250°F). TC380 is optimized for out-of-autoclave/vacuum bag only (OOA/VBO) cures, facilitating construction of large or complex composite parts and assemblies. Unlike some other highly toughened systems, there is no need to sequence the prepreg front and back face, assuring robustness and simplifying lay-up. TC380 out life are 21 and 28 days, respectively. 180°C (356°F) Cure, Toughened Epoxy Resin System

Toray E722 is a 120°C (248°F) cure toughened epoxy component prepreg. E722 is designed for structural Applicationss in the motorsport and marine industries. Toray E722 would also suit general aircraft fittings, sporting equipment, and a wide range of engineering Applicationss. Toray E722 is compatible for co-cure with Toray MicroPly™ EF72, a 120°C (248°F) cure resin film, and Toray MicroPly™ SC72A syntactic core. 120°C (248°F) Cure Toughened Epoxy Resin System

Toray E760 is a highly toughened epoxy component prepreg with exceptional high temperature performance. It has been designed for use in mechanically demanding structural Applicationss exposed to elevated temperature environments, such as Formula 1 and high performance automotive. 180°C (350°F) Cure System Highly Toughened Epoxy Component Prepreg

Toray E726 is a toughened epoxy resin system with controlled flow for cures at 120°C (248°F), pre-impregnated into high performance fibers such as carbon, glass and aramid. It is designed for use within medical and industrial Applicationss and would also suit a wide range of engineering Applicationss. Toray E726 is compatible for co-cure with Toray EF72, a 120°C (248°F) cure resin film and Toray MicroPly™ SC72A syntactic core.

Toray TC275-1 is a dual-cure toughened epoxy prepreg designed to facilitate composite part construction with low pressure or vacuum pressure cures. The resin system features a 14-day tack life and 14-day total out time to allow the construction of thick or larger composite structure. TC275-1 may be cured at a lower temperature of 135°C (275°F) or can be cured at 177°C (350°F) for higher temperature service. 135–177°C (275–350°F) Cure Toughened Epoxy Resin System

Toray TC522 is a highly toughened modified epoxy resin system. TC522 displays outstanding Compression After Impact (CAI), setting it apart from other resins designed for dielectric Applicationss. TC522 exhibits excellent mechanical and thermal properties, along with very low moisture absorption. TC522 low dielectric constant and loss tangent along with very high CAI make it ideal for radome and antenna Applicationss in environments where impact and high mechanical properties are required. 180°C (356°F) Cure Highly Toughened Modified Epoxy