Products

TriBond W™ is a water-based, two-part epoxy primer that dries quickly. This primer can be quickly overcoated to meet the demands of high-speed production. TriBond W™ adheres extremely well to iron phosphate and blasted surfaces that have been properly prepared. TriBond W™ adheres well to most non-ferrous metal surfaces and can be applied over zinc galvanizing, inorganic zinc, and most other non-ferrous metal surfaces. Corrosion, water resistance, adhesion, and overall durability are all excellent.

Tripoxy™ is a two-component (1:1 mix ratio), high-solids, solvent-borne, polyamide cure, high-gloss epoxy enamel with USDA approval for incidental food contact. The cured film is extremely dense and hard, but not brittle. It is watertight and impermeable, making it suitable for submersion service. It is resistant to most common solvents, all alkalis, and most acids when splashed or spilled. The 41 series has good adhesion but only adequate wetting and penetration. Tripoxy, like all epoxies, chalks heavily when exposed to sunlight; this is noticeable after 6 months and continues for 12-18 months. Tritpoxey is also available in a clear form.

Triangle Coatings Epoxy Acrylic DTM is a two-component water-based epoxy acrylic primer/finish that is intended for direct-to-metal applications over properly prepared surfaces. It dries to a tough finish that is extremely durable and performs well. Epoxy Acrylic DTM is a rust-inhibiting coating with a high build.

AllPrime™ is a high-quality, water-based primer for interior use. AllPrime™ is made from a 100 percent acrylic resin system, which provides excellent adhesion, water and alkali resistance, and stain blocking properties. AllPrime™ has a medium film build and is sandable.

Pure & Natural™is a 100% acrylic water-based interior finish with excellent scrub resistance. Pure & Natural™ is unrivaled in terms of performance and appearance, providing maximum durability and effectively concealing hairline cracks. Pure & Natural™ has a very low VOC content and is virtually odorless. This product was developed to meet the needs of professional painters. Pure & Natural™l has a smooth consistency, is resistant to drips and splatters, and is simple to apply. This product inhibits mold growth and resists water penetration, resulting in a long-lasting mildew and stain-resistant surface. Pure & Natural™ comes in a variety of colors and can be tinted to match most custom colors. For more information on color options, please contact your Triangle Coatings representative.

Tripoxy HB™ is a two-component epoxy with a high solids content, high build, and low VOC. Tripoxy HB is a high-performance coating for ferrous and nonferrous metals such as zinc, galvanizing, inorganic zinc rich, copper, and brass. This topcoat has good flow and leveling properties. Tripoxy HB provides an extremely high performance coating system when combined with a two-part epoxy primer. When applied to properly prepared surfaces, this product can be used for immersion applications.

Tripoxy™ Primer is a two-part, solvent-based maintenance primer with high performance. This primer provides excellent corrosion protection by utilizing a combination of rust inhibitors. When applied to properly prepared surfaces, Tripoxy Primer has excellent adhesion and water resistance. This primer also has good flow and leveling properties.