Products

US SPEC FS Grout is a blend of specialty cements, admixtures and proprietary aggregates. FS Grout is designed for grouting, anchoring and supporting in applications that require a short turnaround time. FS Grout may be utilized for cold weather placement. It is non-shrink, non-metallic and contains no added chlorides.

US SPEC MP Grout is a blend of portland cement, special admixtures and proprietary aggregates designed to provide high flexural and compressive strength performance from plastic to fluid consistencies. MP Grout is non-metallic, non-shrink, non-corrosive and contains no added chlorides.

US SPEC TP Mortar is a one-component, dry polymer-modified blend of portland cement, selected aggregates and proprietary admixtures designed for repairs from feather edge to 1” in interior and exterior applications. TP Mortar develops a tenacious bond to concrete surfaces and will accept foot traffic in 10-12 hours.

US SPEC NA Grout is a blend of specialty cements and proprietary admixtures. This material is designed to provide maximum flow, shrinkage compensation and extended working times in an aggregate-free formulation where clearances are minimal, such as the grouting of tendon cables. NA Grout is non-metallic and non-corrosive.

US SPEC V/O Patch CI is a one-component, dry polymer-modified, portland cement mortar. V/O Patch CI is a fast setting patching material for vertical and overhead repairs for applications up to 2” in depth. V/O Patch CI utilizes a low solubility corrosion inhibitor to extend service-life of reinforced structures reducing absorption and chloride ion permeability. V/O Patch CI exhibits superior workability by maintaining a non-sag consistency for easy molding and shaving.

Transpatch is a rapid setting, rapid hardening concrete patching material that exhibits excellent flexural properties, shear bond strength and compressive strength. Transpatch is a blend of portland cement and proprietary admixtures. Transpatch offers superior resistance to de-icing salts, petroleum products and other chemicals prevalent on concrete roadways. In addition, Transpatch will not rust or corrode reinforcing steel under moist, humid conditions.

US SPEC Multi-Purpose Thin Set Mortar is a cementitious, latex-enhanced, dry set mortar. It is designed for setting tile over various surfaces including concrete, portland cement based mortar beds, existing tile, terrazzo, cement board, stone and exterior grade plywood.

Transpatch EXT is a structural concrete repair mortar that exhibits excellent flexural, shear bond and compressive strengths. Transpatch EXT is a blend of Portland cement, selected aggregates and proprietary admixtures. Transpatch EXT offers superior resistance to freeze/thaw conditions, deicing salts, petroleum products and other chemicals prevalent on concrete roadways. Transpatch EXT is ideal for formed applications requiring extended working time, high fluidity and high early strength development.

US SPEC EG Grout is a blend of portland cement, admixtures and specialty graded aggregates designed to provide ease-of-placement, maximum bearing and compressive strength performance from plastic to fluid consistency. EG Grout is non-metallic, non-shrink, non-corrosive and contains no added chlorides.

US SPEC RA Grout is a blend of specialty cements and proprietary admixtures. This material is designed to provide maximum flow, shrinkage compensation and extended working times in an aggregate free formulation where clearances are minimal. RA Grout is non-metallic and non-corrosive.

US SPEC STR Mortar CI is a slow setting, pumpable, structural concrete repair mortar that exhibits excellent flexural properties, shear bond strength and compressive strength. STR Mortar CI is a blend of portland cement, selected aggregates and proprietary admixtures. STR Mortar CI utilizes a low solubility corrosion inhibitor to extend service-life of reinforced structures reducing absorption and chloride ion permeability. STR Mortar CI is ideal for formed applications that require extended working time, high fluidity and added depth requirements.

US SPEC GP Grout is a blend of portland cement, special admixtures and proprietary aggregates designed to provide high flexural and compressive strength performance from plastic to fluid consistencies. GP Grout is non-metallic, non-shrink, non-corrosive and contains no added chlorides.

US SPEC MS Gunnite is a one-component, dry process shotcreting repair mortar designed with portland cements, fine aggregates, microsilicas and proprietary admixtures. MS Gunnite provides maximum strength, high density, low rebound and low sag properties for interior or exterior machine-applied concrete restoration and repairs. Also available with poly fibers.

US SPEC HE Grout is a blend of specialty cements, admixtures and proprietary aggregates designed to provide high flexural and compressive strength performance at flowable consistency. HE Grout is non-metallic, non-shrink, non-corrosive and contains no added chlorides.