Products

SILPURAN® 6760/50 A/B is a paste-like, easily pigmentable two-component compound with a very short curing time and good mechanical and electrical properties. Vulcanizates are noted for their self-adhesive properties to various substrates combined with a low coefficient of friction. SILPURAN® 6760/50 A/B is designed for medical applications in compliance with the WACKER SILICONES HEALTH CARE POLICY, including implantation for less than 30 days.

SILPURAN® 6600/50 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. Compared to the SILPURAN® 6000 series, the coefficient of friction of a post-cured article made of SILPURAN® 6600 is reduced by 50–70%. SILPURAN® 6600/50 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® 6610/50 A/B is a paste-like, two-component compound. Its vulcanizates are noted for their significantly reduced tendency towards radical-induced reattachment, i.e., healing, of slit valve surfaces during sterilization by gamma irradiation and e-beam ( 75 kGy). SILPURAN® 6610/50 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

ELASTOSIL® LR 5040/50 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required postcure. Articles made from ELASTOSIL® LR 5040/50 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.

ELASTOSIL® LR 5040/20 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required postcure. Articles made from ELASTOSIL® LR 5040/20 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.

SILPURAN® 6000/60 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/60 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® 6700/50 A/B is a paste-like, easily pigmentable two-component compound with a very short curing time and good mechanical and electrical properties. Vulcanizates are noted for their self-adhesive properties on various substrates. SILPURAN® 6700/50 A/B is designed for medical applications in compliance with the WACKER SILICONES HEALTH CARE POLICY, including implantation for less than 30 days.

SILPURAN® 6000/05 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/05 A/B is designed for medical applications in compliance with Wacker Silicones' health care policy. Please note that this material has use restrictions according to Wacker Silicone's health care policy. In particular, contact with body tissue or blood is not permitted.

SILFAR® S 184 is a 100% silicone antifoam agent specially designed for the pharmaceutical and food processing industries. It fully adheres to the specifications outlined in the "Simeticone (EP)" and "Simethicone (USP)" monographs. Produced under cGMP guidelines, SILFAR® S 184 is suitable for use as an active pharmaceutical ingredient (API), particularly in antiflatulence and antacid preparations.

ELASTOSIL® LR 34004/50 A/B is a paste-like, white, two-component liquid silicone rubber with a very short curing time. Vulcaniates are noted for their radio-opaqueness. ELASTOSIL® LR 34004/50 A/B contains barium sulfate as a radio-opaque additive, which meets the requirements of the US and European Pharmacopeia.

ELASTOSIL® LR 5040/30 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required postcure. Articles made from ELASTOSIL® LR 5040/30 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.

Wacker Chemie Ethyl 2-Chloroacetoacetate (2-Cl-ACE) is a colorless to yellowish liquid with a pungent odor. It serves as a versatile building block for various applications. It is commonly used as a building block for heterocycles such as thiazoles and pyrazoles. Additionally, it is employed in the synthesis of pharmaceuticals like Cimetidine, pesticides including Mevinphos and herbicide-safeners, and vitamins such as A1 and B6.

SILPURAN® 6000/10 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/10 A/B is designed for medical applications in compliance with Wacker Silicones' health care policy. Please note that this material has use restrictions according to Wacker Silicone's health care policy. In particular, contact with body tissue or blood is not permitted.

SILPURAN® 6400/40 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6400 exhibits excellent tear resistance measured according to ASTM D 624 B and DIN ISO 34-1 method A (DIN 53507). SILPURAN® 6400/40 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® 6700/40 A/B is a paste-like, easily pigmentable two-component compound with a very short curing time and good mechanical and electrical properties. Its vulcanizates are noted for their self-adhesive properties on various substrates. SILPURAN® 6700/40 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILFAR® 350 is a polydimethylsiloxane derived from the hydrolysis and polycondensation of dichlorodimethylsilane and chlorotrimethylsilane. Its degree of polymerization (n) is adjusted to achieve a mean kinematic viscosity of 350 mm²/s at 25°C. This versatile product finds application in both the pharmaceutical and food sectors. In the pharmaceutical industry, it is commonly used in antiflatulence and antacid preparations.

SILFAR® SE 88 is a silicone antifoam emulsion suitable for various industries such as food, pharmaceuticals, fermentation processes, and agrochemical formulations. It is specifically designed for European use as a processing aid in food production, based on E 900. It is important for the food manufacturer to ensure that only minimal traces of the product are present in the final food, as per the necessary regulations.

SILPURAN® AUX 8251 RO is a white, barium sulfate-containing batch that is used as a radio-opaque additive for addition-cured high-consistency silicone rubber. SILPURAN® AUX 8251 RO is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

ELASTOSIL® LR 5040/40 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required postcure. Articles made from ELASTOSIL® LR 5040/40 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.

SILPURAN® 6000/50 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/50 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILFAR® S 188 is a 100% silicone antifoam agent that has been specifically formulated for use in the pharmaceutical and food processing industries. It functions by acting as an antifoam agent, effectively preventing or alleviating flatulence in the digestive system. Additionally, it forms a protective lining on various surfaces, such as the gastric mucous membrane, providing additional benefits.

SILPURAN® 6610/60 A/B is a paste-like, two-component compound. Its vulcanizates are noted for their significantly reduced tendency towards radical-induced reattachment, i.e., healing, of slit valve surfaces during sterilization by gamma irradiation and e-beam (≤ 75 kGy). SILPURAN® 6610/60 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

ELASTOSIL® E47 Transparent is a non-slump, one-component acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows particularly excellent adhesion to cured silicone elastomers. Vulcanization can be accelerated by elevated temperatures (up to 80°C).

SILPURAN® 6000/40 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/40 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

VINNEX® 2522 is a solid, thermoplastic homopolymer that is transparent, colorless, and odorless. It is produced through the polymerization of vinyl acetate. This product is commonly used for modifying biopolymers and biopolymer compounds, as well as for blending with natural fibers or flours like wood, starch, and cork.

SILPURAN® 6700/60 A/B is a paste-like, easily pigmentable two-component compound with a very short curing time and good mechanical and electrical properties. Vulcanizates are noted for their self-adhesive properties on various substrates. SILPURAN® 6700/60 A/B is designed for medical applications in compliance with the WACKER SILICONES HEALTH CARE POLICY, including implantation for less than 30 days.

SILPURAN® 6400/50 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6400 exhibits excellent tear resistance measured according to ASTM D 624 B and DIN ISO 34-1 method A (DIN 53507). SILPURAN® 6400/50 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILFAR® SE 4 is a silicone antifoam emulsion that finds its use in the food and pharmaceutical sectors, as well as in fermentation processes and agrochemical formulations. It serves as an effective antifoam agent in various stages, including fermentation and downstream processes like active ingredient extraction and solvent recovery, where compliance with USP and EP standards is necessary.

ELASTOSIL® LR 5040/70 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required post-cure. Articles made from ELASTOSIL® LR 5040/70 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.

ELASTOSIL® LR 5040/60 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required post-cure. Articles made from ELASTOSIL® LR 5040/60 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.

SILPURAN® AUX 8250 RO is a white, barium sulfate-containing batch that is used as a radio-opaque additive for peroxide-cured high-contrast silicone rubber. SILPURAN® AUX 8250 RO is designed for medical applications in compliance with the WACKER SILICONES HEALTH CARE POLICY, including implantation for less than 30 days.

HDK® N20 Pharma is a synthetic, hydrophilic, amorphous silica powder produced via flame hydrolysis. It is a white, high-purity colloidal powder that enhances the flow of powders and serves as a glidant for tableting processes. Additionally, HDK® N20 Pharma acts as a thickener for liquid pharmaceutical products. Furthermore, HDK® N20 Pharma undergoes testing according to the pharmacopeias EP and USP/NF standards.

SILPURAN® 6740/40 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber compound with a short curing time. Vulcanizates are noted for their self-adhesive properties on various substrates and excellent mechanical properties. SILPURAN® 6740/40 A/B is designed for medical applications in compliance with the WACKER SILICONES HEALTH CARE POLICY, including implantation for less than 30 days.

SILPURAN® 6000/20 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/20 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® 6000/30 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/30 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® 6600/40 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. Compared to the SILPURAN® 6000 series, the coefficient of friction of a post-cured article made of SILPURAN® 6600 is reduced by 50–70%. SILPURAN® 6600/40 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.