Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Ingredient Name
- Agrochemical Functions
- CASE Ingredients Functions
- Food Ingredients Functions
- Industrial Additives Functions
- Pharma & Nutraceuticals Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Agrochemicals Features
- Industrial Additives Features
Applications & Uses
- Applications
- Dosage Form
- Industrial Additives End Use
- Applications
- Food
- Pharma
Properties
- Physical Form
- Appearance
- Viscous greyish-white opalescent liquid
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Active Ingredients (Simethicone) | 100 | % | USP/EP |
| Density (at 25°C) | approx. 1 | g/cm³ | — |
| Volatile Content | max. 1.0 | % | — |
Regulatory & Compliance
- Certifications & Compliance
- Grade
- Quality Standards
- Regulatory status
Pharmaceutical use
- SILFAR® S 184 complies with the requirements set down in the monographs "Simeticone (EP)" and "Simethicone (USP)".
- SILFAR® S 184 is produced under cGMP and is suitable for use as an active pharmaceutical ingredient (API) e.g. in anti flatulence and antacid preparations.
- It works by acting as an antifoam agent to prevent or relieve flatulence in the alimentary canal and by forming a protective lining on e.g. the gastric mucous membrane.
- It is often combined with fermentation preparations. When administered to patients, preparations containing the anti-foam
- SILFAR® S 184 eliminate any flatulence that might hinder X-ray, ultrasonic or gastroscopic examinations. SILFAR® S 184 may be used to make tablets and coated tablets.
- SILFAR® S 184 is also antifoam in fermentation and downstream processes, such as active-ingredient extraction and solvent recovery, especially when USP/EP compliant products are mandatory. SILFAR® S 184 is readily sterilized by heat.
Use in Food Processing
- SILFAR® S 184 is a silicone compound based on E 900 and E 551 and may be used in Europe only as a processing aid for food. Therefore, it has to be ensured by the producer of the foodstuff that only technically unavoidable traces of the product remain in the final food.
- In the food industry, SILFAR® S 184 is primarily used when foaming lipophilic systems are present (i.e. for foam control in foodstuffs containing vegetable oils, fats).
- Furthermore, SILFAR® S 184 is a base material for the production of food-compatible antifoam agents.
Contact with Food
- SILFAR® S 184 complies with the Recommendations of the BfR concerning the manufacture of essential commodities that have contact with food "XV. Silicones".
- SILFAR® S 184 is suitable for use under the following section(s) of Title 21 of the Code of Federal Regulations:
- §175.105 Adhesives
- §175.300 Resinous and polymeric coatings
- §176.170 Components of paper and paperboard in contact with aqueous and fatty foods
- §176.180 Components of paper and paperboard in contact with dry food
- §176.200 Defoaming agents used in coatings
- §176.210 Defoaming agents used in the manufacture of paper and paperboard
- Regulatory sanctioning of the ingredients in a product does not imply that the finished product manufactured from those ingredients is considered safe by regulatory bodies. Responsibility for compliance with specific limits e.g. on migration/ extraction resides with the manufacturer of the finished product.
Use in Agrochemical Formulations- SILFAR® S 184 and it components meet the criteria for an exemption from the requirements of a tolerance when used as an additive in pesticide formulations to be applied to growing crops or raw agricultural commodities after harvest as specified in 40 CFR 180.950 and 180.960.
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Shelf Life
- 540 Days
- Storage Information
Keep container tightly closed. Store container(s) at room temperature in a dry, wellventilated place.