Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Industrial Additives Functions
- Technologies
Features & Benefits
- Industrial Additives Features
- Specific Features
Workability and adhesion
Applications & Uses
- Markets
- Industrial Additives End Use
- Applications
Wall and Joint Fillers
- Application Details
- For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend VINNACEL® 410with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.
- If VINNACEL® 410 is used in applications other than those mentioned, the choice, processing and use of VINNACEL® 410 is the sole responsibility of the purchaser. All legal and other regulations must be complied with. Slight color variations of the dispersible polymer powder may occur without impairing the product's functionality.
Properties
- Appearance
- White to light beige powder
- Typical Properties
- Specifications
- Properties
- VINNACEL 410 is adispersible polymer powder based on vinylacetate-ethylene.
- VINNACEL® 410 is a polymeric binder and is ideal for modifying cementitious drymix mortars, block jointing mortar.
- It provides good workability and adhesion.
- VINNACEL® 410 contains a fine mineral filler as an antiblocking agent.
- It is produced without the use of organic solvents, plasticizers and film-forming agents.
- VINNACEL® 410 has no effect on rheological properties and is a polymer powder in the medium Tg range.
- It is suitable for formulating block jointing mortar that feature good tensile adhesion strength.
| Value | Units | Test Method / Conditions | |
| Minimum Film Forming Temperature | 4 | °C | DIN ISO 2115 |
| Protective Colloid (Emulsifier System) | Polyvinyl alcohol | — | — |
| Value | Units | Test Method / Conditions | |
| Ash Content (at 1000°C) | max. 34 | % | Specific Method |
| Bulk Density | 520 - 670 | kg/m³ | DIN EN ISO 60 |
| Particle Size (min. 400µm) | max. 4 | % | DIN EN ISO 4610 |
| Solids Content | min. 98 | % | DIN EN ISO 3251 |
Packaging & Availability
- Country Availability
- Packaging Type
- Regional Availability
- Packaging Information
25 kg paper bags
Storage & Handling
- Shelf Life
- 6 Months
- Storage Information
During storage, protect the product from contact with moisture. Prolonged storage at temperatures above 30 °C, especially in combination with pressure, humidity or exposure to sunlight, may result in blocking. Carefully seal any open containers and store them under suitable conditions. We recommend storing the product in a warehouse that provides cool and dry conditions. Do not store the product for more than six months, starting from the date at which it was received.