Products

VINNAPAS® CA 55 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is particularly suited for carpet binder applications where a medium-firm hand is required. The dispersion combines high solid content with a low viscosity—a combination that permits the addition of high filler loadings, resulting in adhesive formulations with high solid contents that are typically required in the carpet industry. VINNAPAS® CA 55 is not produced with any added organic solvents, plasticizers, or formaldehyde donors.

VINNAPAS® EP 706K (ULS) is a high-viscosity vinyl acetate-ethylene copolymer dispersion with low formaldehyde and low free VAM residue. It exhibits good machinability and strong wet tack, providing improved adhesion to films like polyvinyl chloride. Additionally, VINNAPAS® EP 706K (ULS) demonstrates very high plasticizer and solvent viscosity thickening responses.

WACKER® Adhesion Promoter AMS 61 is a mixture of aminofunctional siloxanes. It is a colorless to yellow liquid that can be clear or slightly turbid. It is not miscible with water and decomposes with water and moisture, resulting in the formation of methanol. This adhesion promoter serves as a raw material for the production of RTV-1-silicone rubbers.

VINNAPAS® EP 3455 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of alkyl phenol ethoxylate (APEO)-containing compounds. The dispersion offers very high scrub resistance, excellent hiding power, and exceptional pigment binding ability.

GENIOSIL® GF 96 is an alkoxysilane with an amino-functional group. It is a clear, colorless liquid with a characteristic amine odor. This product finds applications in various industries, particularly in building and construction adhesives, DIY projects, flooring installation, interior paints and coatings, and waterproofing membranes. GENIOSIL® GF 96 offers excellent adhesive properties and is well-suited for use in the construction and home improvement sectors.

ELASTOSIL® N294 is a free-flowing, ready-to-use silicone rubber that vulcanizes either at room temperature or at high temperatures under the influence of atmospheric moisture. ELASTOSIL® N294 is available in blue and red colors. It is particularly suited for screen printing.

SILRES® BS 3003 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. Diluted solutions of SILRES® BS 3003 serve as high-quality general-purpose water repellents for impregnating and priming mineral surfaces. It can also be used for the mass treatment of non-load-bearing concrete products and as a post-hydrophobation agent for fiber cement products like fiber cement boards.

GENIOSIL® GF 56 is an alkoxyvinylsilane. It is a clear, colorless liquid with a distinctive aromatic odor. In the presence of moisture, it undergoes hydrolysis (releasing ethanol) to form silanols, which can further react with each other to generate siloxanes. Acting as a bifunctional molecule, GENIOSIL® GF 56 serves as a molecular bridge between organic and inorganic substrates.

VINNAPAS® EP 3360 (BGH) is an aqueous polymer dispersion that is based on vinyl acetate and ethylene. It is produced without the use of alkyl phenol ethoxylate (APEO)-containing compounds. This dispersion offers a high solid content, allowing for formulation flexibility and improved supply-chain efficiency. It also provides very high scrub resistance, excellent hiding power, and enables the creation of low-odor products.

VINNAPAS® EP 3362 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of alkyl phenol ethoxylate (APEO)-containing compounds. The dispersion offers a high solid content, providing formulation flexibility and improving supply-chain efficiency. It exhibits very high scrub resistance and excellent hiding power. Additionally, it features improved high-temperature resistance.

VINNAPAS® 5046 T is a dispersible polymer powder for dry mix mortars, specifically suited for thixotropic tile adhesives, repair mortars, troweling compounds, and ETICS. It is based on a flexible copolymer of vinyl acetate and ethylene. VINNAPAS® 5046 T belongs to the product class VINNAPAS® T, which means that it provides thixotropic properties. In addition to strong non-slump properties, it offers excellent workability.

VINNAPAS® 5012 T is a thixotropic dispersible polymer powder for dry mix technology, specifically suited for tile adhesives, renders and plasters, wall and joint fillers, as well as skim coats. It is based on a hard copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® T, which means it has a thixotropic effect on rheology and provides the basic properties of adhesion and flexibility in addition. VINNAPAS® 5012 T is part of our standard range, offering the best-in-class solution for a wide variety of applications.

VINNAPAS® EAF 7868 is a low glass transition temperature (Tg) aqueous polymer dispersion formulated with vinyl acetate, ethylene, and acrylic esters. It is manufactured without the use of plasticizers and demonstrates excellent compatibility with fillers. Moreover, it provides good adhesion to diverse substrates, including concrete, metal, wood, and plastics. Derived from low-volatile C1/C2 value streams, it can be formulated without the need for plasticizers.

VINNAPAS® EP 3360 (ULS) is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of alkyl phenol ethoxylate (APEO)-containing compounds. The dispersion offers a high solid content, providing formulation flexibility and improving supply-chain efficiency. It also exhibits very high scrub resistance and excellent hiding power.

VINNAPAS® EF 7877 is an aqueous polymer dispersion based on vinyl acetate and ethylene monomers. It is manufactured without the use of plasticizers and exhibits excellent filler compatibility. This product has high filler acceptance and provides good adhesion to various substrates, including concrete, metal, wood, and plastics.

VINNAPAS® 5047 T is a very flexible dispersible polymer powder with a slight thixotropic effect and very good workability, specifically suited for tile adhesives, troweling compounds, and ETICS. It is based on a copolymer of vinyl acetate and ethylene. VINNAPAS® 5047 T belongs to the product class VINNAPAS® T, which means that it provides thixotropic properties. In addition to its non-slump properties, it offers excellent workability.

VINNAPAS® EAF 730 is a polymer dispersion based on vinyl ester, ethylene, and acrylic acid ester. It is characterized by its very good hydrophobic properties combined with excellent color stability. The principal feature of VINNAPAS® EAF 730 is its wide range of uses in coating systems containing opacifying pigments. Versatility is its special strength. VINNAPAS® EAF 730 is particularly recommended to produce masonry paints with good hiding power and great flexibility.

VINNAPAS® 538 ED is a surfactant-stabilized polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of organic solvents, plasticizers, formaldehyde donors, or alkyl phenol ethoxylate (APEO)-containing compounds. VINNAPAS® 538 ED is a medium-viscosity product that exhibits high compatibility with cement, and its influence on cement setting is marginal.

VINNAPAS® eco EP 3360 is an aqueous polymer dispersion based on vinyl acetate and ethylene. This dispersion is formulated without the use of alkyl phenol ethoxylate (APEO)-containing compounds. It offers a high solids content, providing formulation flexibility and supply-chain efficiency. With its very high scrub resistance, it withstands rigorous cleaning without compromising performance. Additionally, it exhibits excellent hiding power, ensuring optimal coverage and a smooth finish.

VINNAPAS® EP 7860 is an aqueous polymer dispersion based on vinyl acetate and ethylene monomers. It is manufactured without the use of plasticizers. This dispersion exhibits excellent compatibility with fillers, allowing for high filler acceptance. Moreover, VINNAPAS® EP 7860 demonstrates special extension recovery properties, particularly at high filler levels. It also offers good adhesion to a variety of substrates, including concrete, metal, wood, and plastics.

VINNAPAS® 4016 N is a hard dispersible polymer powder based on vinyl acetate and ethylene with very good tensile adhesion strength on inorganic surfaces combined with good workability. VINNAPAS® 4016 N was developed for those applications where lower water demand and increased smoothness under the trowel are important.

VINNAPAS® eco EAF 67 is an aqueous polymer dispersion, free of plasticizers, produced from vinyl acetate, ethylene, and acrylate monomers. This dispersion serves as a pressure-sensitive adhesive, exhibiting excellent cohesion and adhesion properties that remain effective even at elevated temperatures. The production of VINNAPAS® eco EAF 67 utilizes APEO-free surface active agents.

VINNAPAS® EF 7865 is a low Tg aqueous polymer dispersion formulated with vinyl acetate and ethylene monomers. It is manufactured without the use of plasticizers and demonstrates excellent filler compatibility. This product exhibits high filler acceptance and provides good adhesion to various substrates such as concrete, metal, wood, and plastics.

VINNAPAS® 5537 T is a dispersible polymer powder for dry mix mortars, specifically suited for thixotropic tile adhesives and ETICS. It is based on a flexible copolymer of vinyl acetate and ethylene. VINNAPAS® 5537 T belongs to the product class VINNAPAS® T, which means that it provides thixotropic characteristics. Besides good non-slump properties and workability, it offers good tensile adhesion strength after water immersion. The product is currently in the process of being introduced into industrial use (scale-up product). The quoted product data is, therefore, subject to change. Before industrial use, availability should be clarified with WACKER POLYMERS.

SILRES® WH 101 A is a water-reducible, solvent-free emulsion of a functional silicone resin. It can be applied as-is or as a formulated product to serve as a water-repellent treatment. SILRES WH 101 A improves substrate longevity when applied over wood or many other materials.

VINNAPAS® EAF 68 is a plasticizer-free, aqueous polymer dispersion produced from the monomers vinyl acetate, ethylene, and acrylate. VINNAPAS® EAF 68 is especially suitable as a raw material to manufacture floor covering adhesives, especially for carpets and PVC floor coverings. VINNAPAS® EAF 68 can also be used for the production of pressure-sensitive adhesives, such as self-adhesive tapes, films, labels, sound insulation mats, and heat insulation mats. VINNAPAS® EAF 68 may additionally be used as an adhesion promoter in adhesive formulations.

WACKER® Crosslinker ES 23 is a colorless to yellow liquid that is not miscible with water. When exposed to water or moisture, it decomposes and forms acetic acid. WACKER® Crosslinker ES 23 is utilized as a raw material for acetoxy crosslinking RTV-1 silicone rubbers.

VINNAPAS® 8620 E is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for tile adhesives. It is based on a flexible copolymer of vinylacetate, ethylene, and vinylchloride and belongs to the product class VINNAPAS® E which means that it provides enhanced properties, like extended open time and excellent adhesion after water immersion. VINNAPAS® 8620 E is part of our standard range, offering the best-in-class solution for a wide variety of applications.

SILRES® BS 1701 is a mixture of octyltriethoxysilane isomers, with iso-octyltriethoxysilane as the main component. It is used undiluted for the hydrophobic priming and impregnation of concrete and reinforced concrete. Additionally, SILRES® BS 1701 is suitable for the hydrophobic treatment of fillers and pigments.

WACKER® Adhesion Promoter AMS 70 is an aminofunctional siloxane. It is a colorless to yellow, clear to slightly turbid liquid that is partially miscible with water. When exposed to water and moisture, it decomposes and forms ethanol and a silicone resin. This adhesion promoter is primarily used as a raw material for the production of RTV-1-silicone rubbers.

ETONIS® 7142 A is a dispersion of vinyl acetate-ethylene copolymer. It possesses a glass transition temperature (Tg) of -15 °C and is specifically designed for use in asphalt emulsion-based applications. This product enhances various properties such as film flexibility, adhesion, and drying time. ETONIS® 7142 A is suitable for modifying both anionic and cationic asphalt emulsions, offering advantages like rapid setting speeds, easy machining, and effortless clean-up.

VINNAPAS® 5518 H is a strong hydrophobic dispersible polymer powder for dry mix mortars, specifically suited for tile grouts and renders. It is based on a hard copolymer of vinyl acetate and ethylene and belongs to the product class VINNAPAS® H, which means that it provides a remarkable hydrophobic effect in combination with increased mechanical strength.

VINNAPAS® 4121 N is a dispersible polymer powder for dry mix mortars, specifically suited for price-optimized ETICS. It is based on a semi-flexible copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N, which means that it has a neutral effect on rheology and provides very good adhesion on organic (polystyrene) and inorganic (concrete) substrates. Additionally, VINNAPAS® 4121 N can be used for C1- and simple C2-tile adhesives.

SILRES® BS 1346 is a nonionic, solvent-free, water-dilutable emulsion of a reactive polysiloxane. It is used in its undiluted form as a hydrophobizing additive for aqueous masonry paints or plasters. Its purpose is to increase water repellency, water resistance, and water vapor permeability while also enhancing processability and antiblocking properties.

ELASTOSIL® R 401/20 OH is a high-consistency silicone rubber (HCR). Vulcanizates cured with peroxide made from this compound exhibit a unique combination of characteristics. They are known for their good flexibility, high transparency, and mechanical properties. The compounds can be easily pigmented with ELASTOSIL® Color Paste PT and have good processing characteristics. ELASTOSIL® R 401/20 OH serves as a low-duro base, offering acceptable to good mechanical properties and good processing properties. It is also suitable as a blending component to soften ELASTOSIL® silicone rubber compounds.

VINNAPAS® 4020 N is a dispersible copolymer powder composed of vinyl acetate and ethylene that can be easily dissolved in water. It offers a semi-flexible polymer with no impact on rheology and possesses outstanding general-purpose properties. When VINNAPAS® 4020 N is incorporated into compounds, it enhances adhesion, flexural strength, deformability, and abrasion resistance while maintaining excellent handling characteristics. Moreover, it does not significantly affect leveling, thixotropy, or water retention. This makes VINNAPAS® 4020 N an ideal choice for blending with mortar additives that aim to impart specific properties.