Products

SILPURAN® AUX 8250 RO is a white, barium sulfate-containing batch that is used as a radio-opaque additive for peroxide-cured high-contrast silicone rubber. SILPURAN® AUX 8250 RO is designed for medical applications in compliance with the WACKER SILICONES HEALTH CARE POLICY, including implantation for less than 30 days.

ADVALON® TL 11 HM is a 100% active compound that combines polydimethylsiloxane with specialty waxes and an antistatic agent. It has a viscosity of 130 mPa at 80°C. This compound offers good abrasion resistance, a low to medium coefficient of friction, and good slip-stick properties. It also provides increased needle heat resistance and good static protection.

ADVALON® TL 10 HM is a 100% active compound that combines polydimethylsiloxane with a specialty wax. It offers several beneficial properties, including good abrasion resistance, a low to medium coefficient of friction, and good slip-stick properties. Additionally, it provides increased heat resistance for sewing needles and is designed to deliver excellent sewing performance in medium-duty applications.

CAVACURMIN® Curcumin Complex is a specialized curcumin powder known for its high bioavailability and enhanced dispersibility in water. Unlike regular curcumin, which is insoluble in water and has low bioavailability, CAVACURMIN® offers a solution to increase the bioavailability of hydrophobic health-promoting ingredients, such as curcumin. This is achieved through complexation with cyclodextrins. CAVACURMIN® is specifically an inclusion complex consisting of natural curcumin and CAVAMAX® W8 gamma-cyclodextrin.

CAVAQ10® CoQ10 Complex is a highly bioavailable coenzyme Q10 powder with improved dispersibility in water. This product itself is not soluble in water and has low bioavailability. WACKER offers an excellent solution for increasing the bioavailability of hydrophobic health-promoting ingredients through complexation with cyclodextrins. CAVAQ10® CoQ10 Complex is an inclusion complex of natural ubiquinone with CAVAMAX® W8 gamma-cyclodextrin. As a powerful antioxidant, it brings a wide range of health benefits for various functional food and dietary supplement applications.

CAVAMAX® W6 Pharma is a pharmaceutical-grade alpha-cyclodextrin from Wacker Chemie AG. With 6 glucose units, it has the smallest cavity among the parent cyclodextrins. It is highly beneficial for solubilizing, stabilizing, or delivering small molecules. It helps in the solubilization, stabilization, and delivery of small active ingredients, e.g. fatty acids.

CAVAMAX® W6 6 is standard grade alpha-cyclodextrin from Wacker Chemie AG. With 6 glucose units CAVAMAX® W6 has the smallest cavity of the parent cyclodextrins. This versatile product is useful for solubilizing, stabilizing or delivering small molecules. Synonyms: alpha-cyclodextrin, cyclohexaamylose, cyclomaltohexaose.

SILRES® 604 is a flaked silicone resin that exhibits good compatibility with organic resins. It is primarily used as a pure binder in various applications. It is supplied as a solvent-free solid resin. One of the key applications of SILRES® 604 is as a base material for powder coatings. It is particularly suitable for heat-resistant formulations that can withstand temperatures up to 650 °C. Furthermore, when used in white formulations, SILRES® 604 can maintain its color stability up to temperatures as high as 270 °C without significant yellowing. The ability of SILRES® 604 to act as a pure binder and its high-temperature resistance make it a valuable component in the formulation of heat-resistant powder coatings.

LIOSIL® eco MQ 803 is derived from the co-hydrolysis of tetraalkoxy silane (Q unit) and trimethylalkoxy silane (M unit). Its chemical structure can be described as a three-dimensional network of polysilicic acid units that are terminated with trimethylsilyl groups. Additionally, LIOSIL® eco MQ 803 contains residual ethoxy and hydroxy functional groups.

GENIOPLAST® PP 20A08 is a pelletized formulation consisting of 20% functional silicone dispersed in polypropylene. It has been specifically developed as a compounding additive for unfilled and filled thermoplastic polyolefin compounds. This product is odorless. When used within the recommended levels (0.5 - 2%), GENIOPLAST® PP 20A08 does not have a negative impact on the thermo-mechanical properties of the compounds it is added to. Additionally, due to its specific effect, the processing temperature of the polyolefin compound can be slightly lowered.

ELASTOSIL® AUX Stabilizer H3 is a ready-to-use additive comprising a heat-stabilizing filler and a reactive silicone polymer, which is a typical ingredient of ELASTOSIL® high-consistency rubber grades. This ensures that the batch is incorporated into the elastomer network during vulcanization and thus does not show any migration.

NEXIVA® GP 121 is a flexible dispersible polymer powder formulated with vinyl acetate and ethylene. It serves as a versatile binder suitable for a wide range of applications in various industries. This product includes a fine mineral filler that acts as an antiblocking agent, ensuring smooth and easy handling. Additionally, it offers improved workability even under harsh climatic conditions.

VINNEX® 2525 is a solid, thermoplastic homopolymer obtained through the polymerization of vinyl acetate. This resin is clear, colorless, and tasteless. It is commonly used for modifying biopolymers and biopolymer compounds, as well as for blending with natural fibers or flours like wood, starch, and cork.

NEXIVA® GP 225 is a dispersible polymer powder that primarily consists of vinyl acetate and ethylene. It is specifically formulated as a versatile binder suitable for a wide range of applications across various industries, including coatings and adhesives. However, its potential uses are not limited to these industries alone.

CAVAMAX® W8 is a standard-grade gamma-cyclodextrin manufactured by Wacker Chemie AG. With its structure consisting of eight glucose units, CAVAMAX® W8 possesses the largest cavity among the parent cyclodextrins. It is highly water-soluble and valuable for its ability to solubilize, stabilize, or deliver larger molecules, including lipids. Synonyms: gamma-cyclodextrin, cyclooctaamylose, cyclomaltooctaose

SILRES® REN 168 is a solid, silanol-functional methylphenyl silicone resin that is specifically recommended for the silicone modification of organic resins, including silicone polyester. Its main application is to enhance the weather and heat resistance of paints. SILRES® REN 168 is well-suited for incorporating a compatible silicone component into other binder systems, resulting in increased weathering or heat resistance properties. By introducing SILRES® REN 168, binder systems can be effectively modified to improve their performance in challenging environmental conditions and high-temperature applications.

VINNEX® 2526 is a solid, thermoplastic homopolymer derived from the polymerization of vinyl acetate. This clear and colorless resin possesses a tasteless quality. It finds common applications in the modification of biopolymers and biopolymer compounds, as well as in blending with natural fibers or flours such as wood, starch, and cork.

SILRES® REN 100 is a reactive, silanole-functional phenyl-propyl polysiloxane specifically designed to enhance the heat resistance of organic polymers. It is highly suitable for incorporating a compatible silicone component into other binder systems, thereby increasing their heat-resistance properties. SILRES® REN 100 enables the modification of binder systems to improve their performance in high-temperature environments.

SILRES® Powder A is a highly efficient silicone water-repellent additive available in powder form. It is suitable for use in both dry powder and liquid systems. This makes it versatile for manufacturing various products, including those based on earth-moist or slurry formulations.

CAVAMAX® W8 Pharma is pharmaceutical-grade gamma-cyclodextrin from Wacker Chemie AG. This product, with 8 glucose units, has the largest cavity of the parent cyclodextrins and is the most water-soluble. It is useful for solubilizing, stabilizing, or delivering larger molecules, such as macrocyclics, oils, lipids, etc.

BELSIL® TMS 803 is a co-hydrolysis product derived from tetraalkoxysilane (Q unit) and trimethylethoxysilane (M unit). Its chemical structure forms a three-dimensional network of polysilic acid units, which are endblocked with trimethylsilyl groups. There are residual ethoxy and hydroxy functionalities present. This product is a white powder manufactured to be substantially free of aromatic solvents like toluene. With its low content of fine dust particles and uniform particle size, BELSIL® TMS 803 demonstrates excellent rheological properties, particularly in terms of flowability. It can be blended with polydimethylsiloxanes for compounding purposes.

Nexiva® PA 210 (PRC) is a dispersible polymer powder based on a copolymer of vinyl acetate and ethylene. NEXIVA® PA 210 (PRC) contains fine mineral additives as an anti-blocking agent. It is produced without adding organic solvents, plasticizers, or film-forming agents. It is developed for paper coating and EPI wood glue.

VINNACEL® 101 is a polymeric modifier that can be used solely with mineral fillers and cement to achieve mortars with high strength and good workability, such as tile adhesives and skim coats. The product is in the process of being introduced into industrial use (a scale-up product).

WACKER® MQ 803 TF is a co-hydrolysis product of tetraalkoxy silane (Q unit) and trimethylalkoxy silane (M unit). Its chemical structure forms a three-dimensional network of polysilicic acid units, which are endblocked with trimethylsilyl groups. The product contains residual ethoxy and hydroxy functions. The average molecular weight can be precisely controlled by adjusting the ratio of M and Q units, with WACKER® MQ 803 TF having a ratio of approximately 0.67. WACKER® MQ 803 TF is a pure white powder that is manufactured to be largely free of volatile impurities, containing only trace amounts of aliphatic hydrocarbons. The product's low presence of fine dust particles and its uniform spherical particle shape contribute to its excellent rheological properties, particularly its flowability. As a result, common powder processing techniques such as bottling, conveying, and metering are simplified.

FERMOPURE® Vegan L-Cysteine Food A is an anhydrous hydrochloride salt of L-cysteine. It is available as a white powder or colorless crystals. L-Cysteine, a natural amino acid, is unique as it contains sulfur, similar to methionine. This product finds applications in dough softening and enhancing savory flavors.

SILRES® H 44 is a powdered, condensation-curing phenyl silicone resin with excellent solubility in various organic solvents. The product can be used as a binder or as an impregnation agent for porous materials. Due to its compatibility with organic resins, SILRES® H 44 can also be used to modify or partly replace phenolic resins in the respective compounds. Compared to other silicone resins, SILRES® H 44 cures relatively quickly at elevated temperatures. It is therefore particularly suitable for fully automated production lines.

VINNACEL® 808 is a plasticizing dispersible polymer powder based on vinyl acetate and ethylene with an instant plasticizing and stabilizing effect. The product is in the process of being introduced into industrial use (a scale-up product). Therefore, the product data given is subject to change. Always consult WACKER POLYMERS about the product's availability before using it for industrial purposes.

SILRES® Powder E is a powder-form water-repellent additive based on silane technology. It is highly efficient and offers exceptional water repellency even at low concentrations, while maintaining water vapor permeability. SILRES® Powder E is a high-quality specialty product specifically designed to enhance the water repellency and water resistance of non-load-bearing precast concrete products or mineral construction material mixes. It can be used in various applications, such as premixed plasters, joint mortars, and powder paints.

FERMOPURE® L-Cysteine Pharma Endotox Hydrochloride Monohydrate is a white or nearly white crystalline powder or colorless crystals. L-Cysteine is a naturally occurring amino acid and is one of the 20 amino acids. It is unique among amino acids as it contains sulfur, along with methionine. WACKER has innovatively developed a new production method for this amino acid using fermentation, utilizing non-animal and non-human raw materials.

SILFOAM® SP 150 maintains its activity across a wide range of temperatures. It provides an excellent and long-lasting antifoam effect, which is particularly beneficial in laundry detergents. SILFOAM® SP 150 is recommended for use in both phosphate-based and phosphate-free laundry detergents. It can be used as a foam inhibitor independently or in combination with soap.

BELSIL® R 220 is a solid phenyl silicone resin primarily designed as a film former for color cosmetic applications, with a specific focus on nail polish. It combines the desirable film-forming properties of silicone resins with a remarkable high gloss and shine. Thanks to the presence of phenyl groups, BELSIL® R 220 achieves a significantly higher level of gloss compared to standard silicone resins. Moreover, when compared to other phenylated silicone resins, BELSIL® R 220 exhibits improved solubility, particularly in solvents commonly utilized in nail polish formulations like ethyl acetate and butyl acetate.

SILRES® 603 is a solid silicone resin that contains phenyl groups and is known for its good compatibility with organic polymers. It serves as a base material for heat-resistant powder coatings, particularly those that require above-average gloss retention during heating. When creating heat-resistant and black pigmented powder coatings, it is recommended to blend SILRES® 603 with organic binders specifically designed for powder coatings. Additionally, the inclusion of heat-resistant pigments can further enhance its performance.

SILRES® 610 is a hard, solid silicone resin containing methyl groups. It is supplied in the form of solid flakes. A typical application is its use as a binder for high-temperature-resistant coatings after being dissolved in a suitable solvent. SILRES® 610 is utilized as a binder in coatings, offering a combination of heat resistance and weathering resistance. Additionally, it dries quickly, resulting in a film that is free from tackiness.

VINNOL® E 15/48 A is a hydroxyl-containing copolymer composed of approximately 84 wt.% vinyl chloride (VC) and 16 wt.% acrylic acid esters. It serves as a binder in surface coating compounds and printing inks. This thermoplastic binder undergoes a physically drying process, resulting in the formation of a film as the solvent within the formulation evaporates.

CAVAMAX® W7 Pharma is a pharmaceutical-grade beta-cyclodextrin manufactured by Wacker Chemie AG. With its structure composed of seven glucose units, it possesses a mid-size cavity among the parent cyclodextrins. This product is particularly valuable for its ability to stabilize, solubilize, or deliver intermediate-size molecules, such as menthol.

VINNOL® E 22/48 A is a copolymer composed of approximately 75 wt.% vinyl chloride (VC) and 25 wt.% carbon acid esters with hydroxyl functionality. It serves as a binder for surface coating compounds and printing inks. As a thermoplastic and physically drying binder, VINNOL® E 22/48 A undergoes film formation as the solvent within the formulation evaporates.