Products

VINNAPAS® 502 ND is an aqueous polymer dispersion consisting of vinyl acetate and ethylene. Unlike other products, VINNAPAS® 502 ND is manufactured without the need for organic solvents or plasticizers. With a higher solid content and a high Tg (glass transition temperature), it is well-suited for gypsum-based joint fillers. This product offers excellent adhesion to paper bands and can be easily sanded for a smooth finish.

SILRES® BS 17 is a solventless concentrate that is based on silanes and siloxanes. It is specifically used in water-diluted form for the hydrophobation (waterproofing) of silicate-based mineral construction materials that are produced in plants. One of the key advantages of SILRES® BS 17 is that it is a water-free and solventless silicone concentrate. It can be easily diluted with drinking water without the need for sophisticated mixing devices. This allows for convenient and efficient dilution, making the application process simpler for users.

VINNAPAS® 543 ED is a versatile polymer dispersion based on vinyl acetate and ethylene with excellent compatibility with cement, pigments, and fillers. VINNAPAS® 543 ED is a dispersion based on vinyl acetate and ethylene. VINNAPAS® 543 ED is produced without adding APEO, plasticizers, or organic solvents.

VINNAPAS® 547 ED (NJG) is a versatile polymer dispersion with high water resistance and excellent compatibility. This product is a dispersion based on vinyl acetate and ethylene. VINNAPAS® 547 ED (NJG) is produced without using formaldehyde donors and without adding plasticizers or organic solvents.

VINNAPAS® 5537 T is a dispersible polymer powder for dry mix mortars, specifically suited for thixotropic tile adhesives and ETICS. It is based on a flexible copolymer of vinyl acetate and ethylene. VINNAPAS® 5537 T belongs to the product class VINNAPAS® T, which means that it provides thixotropic characteristics. Besides good non-slump properties and workability, it offers good tensile adhesion strength after water immersion. The product is currently in the process of being introduced into industrial use (scale-up product). The quoted product data is, therefore, subject to change. Before industrial use, availability should be clarified with WACKER POLYMERS.

VINNAPAS® 4016 N is a hard dispersible polymer powder based on vinyl acetate and ethylene with very good tensile adhesion strength on inorganic surfaces combined with good workability. VINNAPAS® 4016 N was developed for those applications where lower water demand and increased smoothness under the trowel are important.

VINNAPAS® 5046 T is a dispersible polymer powder for dry mix mortars, specifically suited for thixotropic tile adhesives, repair mortars, troweling compounds, and ETICS. It is based on a flexible copolymer of vinyl acetate and ethylene. VINNAPAS® 5046 T belongs to the product class VINNAPAS® T, which means that it provides thixotropic properties. In addition to strong non-slump properties, it offers excellent workability.

VINNAPAS® 5012 T is a thixotropic dispersible polymer powder for dry mix technology, specifically suited for tile adhesives, renders and plasters, wall and joint fillers, as well as skim coats. It is based on a hard copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® T, which means it has a thixotropic effect on rheology and provides the basic properties of adhesion and flexibility in addition. VINNAPAS® 5012 T is part of our standard range, offering the best-in-class solution for a wide variety of applications.

VINNAPAS® 5047 T is a very flexible dispersible polymer powder with a slight thixotropic effect and very good workability, specifically suited for tile adhesives, troweling compounds, and ETICS. It is based on a copolymer of vinyl acetate and ethylene. VINNAPAS® 5047 T belongs to the product class VINNAPAS® T, which means that it provides thixotropic properties. In addition to its non-slump properties, it offers excellent workability.

VINNAPAS® 4115 N is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for tile adhesives and skim coats. It is based on a hard copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS®N, which means that it has a neutral effect on rheology and provides the basic properties of adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 4115 N is part of our standard range, offering the best-in-class solution for a wide variety of applications.

VINNAPAS® 8034 H is a very strong hydrophobic dispersible polymer powder for dry mix mortars, specifically suited for tile grouts, renders, plasters, and skim coats. It is based on a flexible terpolymer of vinyl chloride, ethylene, and vinyl laurate. VINNAPAS® 8034 H belongs to the product class VINNAPAS® H, which means that it provides a remarkable hydrophobic effect in addition to adhesion properties.

VINNAPAS® 4713 N is a dispersible polymer powder specifically designed for formulating tile adhesives with excellent adhesion to wood and superior water resistance, meeting standards such as ANSI 118.4, ANSI 118.11, ANSI 118.15, and ISO 13007-1. When used as a modification for inorganic binders, VINNAPAS® 4713 N significantly enhances workability. Mortars incorporating VINNAPAS® 4713 N exhibit improved properties, including adhesion, flexibility, deformability, and abrasion resistance.

VINNACEL® 315 is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for tile adhesives. It is based on a hard copolymer of vinyl acetate and ethylene, which has a neutral effect on rheology and provides basic properties of adhesion and workability. It offers a high degree of formulation freedom and is part of our customized range, providing the best-in-class solution for a wide variety of applications.

VINNAPAS® 5016 N (PRC) is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for tile adhesives and skim coat. It is based on a hard copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N, which means that it has a neutral effect on rheology and provides the basic properties of adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 5016 N (PRC) is part of our standard range, offering the best-in-class solution for a wide variety of applications.

VINNAPAS® 4712 N is a high-quality dispersible polymer powder designed specifically for formulating tile adhesives with exceptional adhesion to wood and excellent water resistance, meeting standards such as ANSI 118.4, ANSI 118.11, and ISO 13007-1. This copolymer powder, based on vinyl acetate and ethylene, easily disperses in water, providing a reliable and versatile polymeric binder with a medium Tg range.

VINNAPAS® 5028 E (USA) is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for tile adhesives and wall troweling compounds. It is based on a flexible copolymer of vinyl acetate and ethylene and belongs to the product class VINNAPAS® E, which means that it provides enhanced properties, such as extended open time, flexibility, and increased adhesion after water immersion. VINNAPAS® 5028 E (USA) is part of our standard range, offering you the best-in-class solution for a wide variety of applications.

VINNAPAS® 202 HD is a multi-purpose construction dispersion for liquid and paste with cement-free binder technology, specifically suited for primers, ready-to-use tile adhesives, and one-component dispersion-based water-proofing membranes. It is based on a hard copolymer of styrene and acrylate and belongs to the product class VINNAPAS® HD, which means that it provides a remarkable hydrophobic effect in addition to excellent adhesion even under wet conditions.

VINNAPAS® 4021 T is a dispersible copolymer powder consisting of vinyl acetate and ethylene that can be easily dissolved in water. When incorporated into compounds, VINNAPAS® 4021 T enhances adhesion, flexural strength, deformability, and abrasion resistance while also improving processability. It is particularly beneficial in combinations with cement and gypsum, as it imparts non-sag properties to mortars.

VINNAPAS® 8118 E is a multi-purpose dispersible polymer powder for dry-mix mortars, specifically suited for tile adhesives. It is based on a flexible terpolymer of vinylacetate, ethylene, and vinychloride and belongs to the product class VINNAPAS®E which means that it has a neutral effect on rheology and provides extended open time and very high adhesion after water immersion and heat storage, giving a high degree of formulation freedom. VINNAPAS® 8118 E is part of our standard range, offering the best-in-class solution for a wide variety of applications.

VINNAPAS® 7220 E is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for tile adhesives and tile grouts. It is based on a flexible copolymer of vinylacetate, ethylene and methylmethacrylate and belongs to the product class VINNAPAS® E which means that it provides enhanced properties like excellent adhesion after water immersion and flexibility. VINNAPAS® 7220 E is part of our standard range, offering the best-in-class solution for a wide variety of applications.

VINNAPAS® 544 ND is a polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of organic solvents, plasticizers, or formaldehyde donors. The residual monomer content of the dispersion is below 1000 ppm. The product exhibits high compatibility with cement, and its influence on cement setting is marginal. It is also compatible with other dispersions (such as styrene/acrylic and pure acrylic dispersions).

VINNAPAS® 240 HD is a multi-purpose construction dispersion for liquid and paste with cement-free binder technology, specifically suited for primers, ready-to-use tile adhesives, and one-component dispersion-based water-proofing membranes. It is based on a flexible copolymer of styrene and acrylate and belongs to the product class VINNAPAS® HD, which means that it provides a remarkable hydrophobic effect in addition to excellent adhesion even under wet conditions.

VINNAPAS® 7210 E is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for tile adhesives and tile grouts. It is based on a flexible copolymer of vinylacetate, ethylene, and methylmethacrylate and belongs to the product class VINNAPAS® E which means that it provides enhanced properties, like excellent adhesion after water immersion and flexibility. VINNAPAS® 7210 E is part of our standard range, offering the best-in-class solution for a wide variety of applications.

VINNAPAS® 5005 N is a dispersible polymer powder for dry mix mortars, specifically suited for cost-efficient cementitious tile adhesives, wall fillers, and joint fillers. It is based on a very hard VA/E copolymer and belongs to the product class VINNAPAS® N, which means that it has a neutral effect on rheology. VINNAPAS® 5005 N provides good adhesion strength very efficiently in tile adhesive at low polymer dosages.

VINNAPAS® 4020 N is a dispersible copolymer powder composed of vinyl acetate and ethylene that can be easily dissolved in water. It offers a semi-flexible polymer with no impact on rheology and possesses outstanding general-purpose properties. When VINNAPAS® 4020 N is incorporated into compounds, it enhances adhesion, flexural strength, deformability, and abrasion resistance while maintaining excellent handling characteristics. Moreover, it does not significantly affect leveling, thixotropy, or water retention. This makes VINNAPAS® 4020 N an ideal choice for blending with mortar additives that aim to impart specific properties.

VINNAPAS® 8812 T is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for tile adhesives and wall trowelling compounds. It is based on a flexible copolymer of vinylacetate, ethylene, and vinychloride and belongs to the product class VINNAPAS® T which means that it provides good anti-sag properties and excellent adhesion after water immersion, giving a high degree of formulation freedom. VINNAPAS® 8812 T is part of our standard range, offering the best-in-class solution for a wide variety of applications.

VINNAPAS® 5010 N is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for tile adhesives and skim coat. It is based on a hard copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N, which means that it has a neutral effect on rheology and provides the basic properties of adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 5010 N is part of our standard range, offering the best-in-class solution for a wide variety of applications.

VINNAPAS® 5010 N (USA) is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for tile adhesives, renders, plasters, and skim coats. It is based on a hard copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N, which means that it has a neutral effect on rheology and provides the basic properties of adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 5010 N (USA) is part of our standard range, offering the best-in-class solution for a wide variety of applications.

VINNAPAS® 545 ND is a polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of organic solvents, plasticizers, or formaldehyde donors. The residual monomer content of the dispersion is below 1000 ppm. It exhibits high compatibility with cement, and its influence on cement setting is marginal. VINNAPAS® 545 ND has a medium viscosity, is compatible with other dispersions (such as styrene/acrylic and pure acrylic dispersions), and is recommended for tile adhesives as well as cement admixtures.

VINNAPAS® 5410 N is a multi-purpose dispersible polymer powder for dry-mix mortars, specifically suited for tile adhesives. It is based on a semi-flexible copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N which means that it has a neutral effect on rheology and provides the basic properties of flexibility, excellent tensile adhesion, and good open time, giving a high degree of formulation freedom. VINNAPAS® 5410 N is part of our standard range, offering the best-in-class solution for a wide variety of applications.

VINNAPAS® 5021 T is a dispersible polymer powder for dry mix mortars, specifically suited for tile adhesive and wall and joint fillers. It is based on a semi-flexible copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS T, which means it has a thixotropic effect on the rheology.

VINNAPAS® 4121 N is a dispersible polymer powder for dry mix mortars, specifically suited for price-optimized ETICS. It is based on a semi-flexible copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N, which means that it has a neutral effect on rheology and provides very good adhesion on organic (polystyrene) and inorganic (concrete) substrates. Additionally, VINNAPAS® 4121 N can be used for C1- and simple C2-tile adhesives.

VINNAPAS® 4417 N is a dispersible polymer powder formulated with vinyl acetate-ethylene, offering semi-flexible properties, a prolonged open time, and outstanding tensile adhesion strength. As a polymeric binder, VINNAPAS® 4417 N is well-suited for enhancing cementitious drymix mortars, particularly tile adhesives.

VINNAPAS® 224 HD is a multi-purpose construction dispersion for liquid and paste with cement-free binder technology, specifically suited for primers, ready-to-use tile adhesives, and one-component dispersion-based water-proofing membranes. It is based on a hard copolymer of styrene and acrylate and belongs to the product class VINNAPAS® HD, which means that it provides a remarkable hydrophobic effect in addition to excellent adhesion even under wet conditions.

SILRES® Powder A is a highly efficient silicone water-repellent additive available in powder form. It is suitable for use in both dry powder and liquid systems. This makes it versatile for manufacturing various products, including those based on earth-moist or slurry formulations.

VINNAPAS® 548 ND is a high-viscosity polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of organic solvents, plasticizers, or formaldehyde donors. The residual monomer content of the dispersion is below 1000 ppm. The dispersion is characterized by high viscosity and good bonding strength due to high Mw PVOH.