Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
Features & Benefits
- Labeling Claims
Applications & Uses
- Markets
- Applications
- Adhesive and Embedding Mortars
- Wall and Joint Fillers
- Application Details
Processing
For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend VINNAPAS® 5046 T with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.
Properties
- Color
- Physical Form
- Appearance
- White to light beige powder
- Dispersible in
- Water
- Typical Properties
- Specifications
- Properties
- VINNAPAS® 5046 T is a copolymer powder of vinyl acetate and ethylene and is dispersible in water.
- Compounds modified with VINNAPAS® 5046 T exhibit improved adhesion, flexural strength, deformability and abrasion resistance. They also exhibit good non-sag properties and are easier to blend.
- VINNAPAS® 5046 T contains a fine mineral filler as an antiblocking agent. It is produced without the use of organic solvents, plasticizers and film-forming agents.
- VINNAPAS® 5046 T is a highly non-slump dispersible polymer powder in the lower Tg range. It is suitable for formulating low emission compounds that must be highly flexible and exhibit very good non-slump properties.
| Value | Units | Test Method / Conditions | |
| Minimum Film Forming Temperature | 0 | °C | DIN ISO 2115 |
| Protective Colloid (Emulsifier System) | Polyvinyl alcohol, high molecular compounds | — | — |
| Value | Units | Test Method / Conditions | |
| Ash Content (at 1000°C) | max. 9 | % | Specific Method |
| Bulk Density | 350 - 450 | kg/m³ | DIN EN ISO 60 |
| Particle Size (min. 400µm) | max. 2 | % | DIN EN ISO 4610 |
| Solids Content | min. 98 | % | DIN EN ISO 3251 |
Regulatory & Compliance
Packaging & Availability
- Country Availability
- Packaging Type
- Regional Availability
- Packaging Information
VINNAPAS® 5046 T is supplied in 25 kg paper bags, Big Bags or bulk on request.
Storage & Handling
- Shelf Life
- 6 Months
- Storage Information
During storage, protect the product from contact with moisture. Prolonged storage at temperatures above 30°C, especially in combination with pressure, humidity or exposure to sunlight, may result in blocking. Carefully seal any open containers and store them under suitable conditions. We recommend storing the product in a warehouse that provides cool and dry conditions. Do not store the product for more than six months, starting from the date at which it was received.