Knowde Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
Features & Benefits
- CASE Ingredients Features
- Industrial Additives Features
Applications & Uses
- Markets
- Adhesive & Sealant Type
- Industrial Additives End Use
- Applications
Cementitious Tile Adhesives
- Application Details
Processing
For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend VINNAPAS® 8118 E with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.
Properties
- Physical Form
- Appearance
- White to light beige powder
- Typical Properties
- Specifications
- Properties
- VINNAPAS® 8118 E is a dispersible terpolymer powder composed of vinyl acetate, vinyl chloride and ethylene.
- Dry-mix mortars modified with VINNAPAS® 8118 E exhibit improved adhesion, flexural strength, deformability and abrasion resistance.
- VINNAPAS® 8118 E is particularly suited for modifying cementitious and gypsum-based dry-mix mortars, especially tile adhesives.
- VINNAPAS® 8118 E contains a fine mineral filler as an antiblocking agent. It is produced without the use of organic solvents, plasticizers and film-forming agents.
- VINNAPAS® 8118 E is suitable for formulating high-quality, low-emissions flexible tile adhesives. It provides long open time and very good tensile adhesion strength, especially after immersion in water and heat aging.
Value | Units | Test Method / Conditions | |
Minimum Film Forming Temperature | 4 | °C | DIN ISO 2115 |
Protective Colloid (Emulsifier System) | Polyvinyl alcohol | — | — |
Value | Units | Test Method / Conditions | |
Ash Content (at 1000°C) | max. 14 | % | Specific Method |
Bulk Density | 450 - 650 | kg/m³ | DIN EN ISO 60 |
Particle Size (min. 400µm) | max. 4 | % | DIN EN ISO 4610 |
Solids Content | min. 98 | % | DIN EN ISO 3251 |
Packaging & Availability
- Country Availability
- Packaging Type
- Regional Availability
- Packaging Information
VINNAPAS® 8118 E is supplied in 25 kg paper bags, Big Bags or bulk on request.
Storage & Handling
- Storage Information
During storage, protect the product from contact with moisture. Prolonged storage at temperatures above 30°C, especially in combination with pressure, humidity or exposure to sunlight, may result in blocking. Carefully seal any open containers and store them under suitable conditions. We recommend storing the product in a warehouse that provides cool and dry conditions. Do not store the product for more than six months, starting from the date at which it was received.