Products

VINNAPAS® CA 5317 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is particularly suited for backcoatings of woven materials, needle felt floor coverings, and tufted carpets. The dispersion combines a high solid content with a moderate viscosity. VINNAPAS® CA 5317 is not produced with any added organic solvents or plasticizers.

VINNAPAS® EP 705A (ULS) is a vinyl acetate-ethylene copolymer specifically designed as a base polymer for high-performance adhesives. It is produced without using formaldehyde donors. The low viscosity of VINNAPAS® EP 705A (ULS) and its excellent Newtonian flow behavior make it well-suited for high-speed packaging machines.

VINNAPAS® CA 5677 is an aqueous polymer dispersion based on vinyl acetate and ethylene. VINNAPAS® CA 5677 is not produced with any added organic solvents, plasticizers, or formaldehyde donors. VINNAPAS® CA 5677 offers high dry strength, excellent absorbent properties, and a medium-firm hand. It can be used for needle-felted carpets and in the precoat coatings applied in the production of tufted carpet backings.

VINNAPAS® CA 5880 (BGH) is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is particularly suited for carpet binder applications where a firmer hand is required. The dispersion combines high solid content with a lower viscosity—a combination that permits the addition of high filler loadings. This results in adhesive formulations with high solid contents that are typically required in the carpet industry. VINNAPAS® CA 5880 (BGH) is not produced with any added organic solvents, plasticizers, or formaldehyde donors.

VINNAPAS® CA 5824 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is particularly suited for carpet binder applications where a medium/firm hand is required. VINNAPAS® CA 5824 combines high solids content with a low viscosity—a combination that permits the addition of very high filler loadings, such as calcium carbonate, aluminum trihydrate (ATH), or other fillers. This results in adhesive formulations with high solid contents of 80 percent or even greater.

VINNAPAS® CA 5320 is a versatile polymer dispersion based on vinyl acetate and ethylene. It has excellent compatibility with pigments and fillers and delivers strong binding strength, a soft hand, and excellent processability. VINNAPAS® CA 5320 does not contain APEO surfactants and is produced without using formaldehyde donors, plasticizers or organic solvents.

VINNAPAS® CA 5800 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is particularly suited for carpet binder applications where a firmer hand is required. The dispersion combines moderately high solid content with a lower viscosity—a combination that permits the addition of moderate filler loadings. This results in adhesive formulations with high solid contents that are typically required in the carpet industry. VINNAPAS® CA 5800 is not produced with any added organic solvents or plasticizers.

VINNAPAS® EP 706 is a vinyl acetate-ethylene-based copolymer that is produced without the use of formaldehyde donors. It offers good machinability and strong wet tack, providing enhanced adhesion to films such as polyvinyl chloride. Additionally, VINNAPAS® EP 706 exhibits very high plasticizer and solvent viscosity thickening responses.

VINNAPAS® CA 55 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is particularly suited for carpet binder applications where a medium-firm hand is required. The dispersion combines high solid content with a low viscosity—a combination that permits the addition of high filler loadings, resulting in adhesive formulations with high solid contents that are typically required in the carpet industry. VINNAPAS® CA 55 is not produced with any added organic solvents, plasticizers, or formaldehyde donors.

VINNAPAS® CA 5185 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is particularly suited for carpet binder applications where a softer hand is required. The dispersion permits the addition of high filler loadings, resulting in adhesive formulations with high solid contents that are typically required in the carpet industry. VINNAPAS® CA 5185 is not produced with any added organic solvents, plasticizers, or formaldehyde donors.

VINNAPAS® EP 706K (ULS) is a high-viscosity vinyl acetate-ethylene copolymer dispersion with low formaldehyde and low free VAM residue. It exhibits good machinability and strong wet tack, providing improved adhesion to films like polyvinyl chloride. Additionally, VINNAPAS® EP 706K (ULS) demonstrates very high plasticizer and solvent viscosity thickening responses.

VINNAPAS® CA 5310 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is particularly suited for carpet binder applications where a softer hand is required. The dispersion has a moderately high solid content that also permits the addition of moderate filler loadings. This results in adhesive formulations with high solid contents that are typically required in the carpet industry. VINNAPAS® CA 5310 is not produced with any added organic solvents, plasticizers, or formaldehyde donors.

VINNAPAS® EP 705K (ULS) is a vinyl acetate-ethylene copolymer that is protected with PVOH. It has a moderate viscosity and is produced without the use of formaldehyde donors. The polymer's backbone provides the dried adhesive film with toughness and flexibility, which remain even when exposed to water immersion and temperature fluctuations.

VINNAPAS® EP 760 is a unique rapid-setting vinyl acetate-ethylene copolymer dispersion. It stands out as more than just a high-solids version of the VINNAPAS® EP series. This polymer exhibits exceptional adhesion to challenging substrates that are typically difficult to bond, such as polyester, polyethylene terephthalate, tempered aluminum foil, and polystyrene.

VINNAPAS® CA 5544 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is particularly suited for carpet binder applications where a medium-firm hand is required. The dispersion combines a very high solid content with a low viscosity, allowing the addition of very high filler loadings, resulting in adhesive formulations with solid contents of 80 percent or even greater. VINNAPAS® CA 5544 is not produced with any added organic solvents, plasticizers, or formaldehyde donors.

VINNAPAS® CA 5566 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is particularly suited for carpet binder applications where a medium-firm hand is required. VINNAPAS® CA 5566 combines a very high solids content with a low viscosity—a combination that permits the addition of very high filler loadings, such as calcium carbonate, aluminum trihydrate (ATH), or other fillers. This results in adhesive formulations with high solid contents of 80 percent or even greater.

VINNAPAS® 418 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is particularly suited for carpet binder applications where a soft hand is required. The dispersion combines moderately high solid content with a low viscosity, a combination that permits the addition of very high filler loadings, resulting in adhesive formulations with high solid contents.

VINNAPAS® EP 758 is a high-viscosity, high-solid vinyl acetate-ethylene copolymer dispersion with low levels of formaldehyde and free VAM residue. It offers excellent machinability and strong wet tack. VINNAPAS® EP 758 demonstrates chemical stability at both high and low pH levels. It is also compatible with various resins, solvents, plasticizers, and other modifiers, as well as other VINNAPAS® EP dispersions.

VINNAPAS® EP 706K (NJG) is a high-viscosity vinyl acetate-ethylene copolymer dispersion with low formaldehyde and low free VAM residue. It exhibits good machinability and strong wet tack, offering improved adhesion to films such as polyvinyl chloride. Additionally, VINNAPAS® EP 706K (NJG) demonstrates very high plasticizer and solvent viscosity thickening responses.

VINNAPAS® EP 701K is a polymer dispersion based on vinyl acetate and ethylene. It offers excellent elongation, water resistance, and flexibility. This dispersion also demonstrates outstanding adhesion to various plastic surfaces, resulting in permanently flexible adhesive joints and high adhesion.

VINNAPAS® eco EAF 67 is an aqueous polymer dispersion, free of plasticizers, produced from vinyl acetate, ethylene, and acrylate monomers. This dispersion serves as a pressure-sensitive adhesive, exhibiting excellent cohesion and adhesion properties that remain effective even at elevated temperatures. The production of VINNAPAS® eco EAF 67 utilizes APEO-free surface active agents.

VINNAPAS® CA 5850 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is particularly suited for carpet binder applications where a firmer hand is required. The dispersion combines moderately high solid content with a lower viscosity—a combination that permits the addition of moderate filler loadings. This results in adhesive formulations with high solid contents that are typically required in the carpet industry. VINNAPAS® CA 5850 is not produced with any added organic solvents or plasticizers.

VINNAPAS® EP 701K (NJG) is a polymer dispersion based on vinyl acetate and ethylene. It offers excellent elongation, water resistance, and flexibility. This dispersion also demonstrates outstanding adhesion to various plastic surfaces, resulting in permanently flexible adhesive joints. Additionally, it provides high cohesion, ensuring strong and durable bonds.

VINNAPAS® EAF 68 is a plasticizer-free, aqueous polymer dispersion produced from the monomers vinyl acetate, ethylene, and acrylate. VINNAPAS® EAF 68 is especially suitable as a raw material to manufacture floor covering adhesives, especially for carpets and PVC floor coverings. VINNAPAS® EAF 68 can also be used for the production of pressure-sensitive adhesives, such as self-adhesive tapes, films, labels, sound insulation mats, and heat insulation mats. VINNAPAS® EAF 68 may additionally be used as an adhesion promoter in adhesive formulations.

VINNAPAS® EAF 67 is a plasticizer-free, aqueous polymer dispersion produced from the monomers vinyl acetate, ethylene, and acrylate. VINNAPAS® EAF 67 is especially suitable as a raw material to manufacture floor covering adhesives, especially for carpets and PVC floor coverings. VINNAPAS® EAF 67 can also be used for the production of pressure-sensitive adhesives, such as self-adhesive tapes, films, labels, sound insulation mats, and heat insulation mats. VINNAPAS® EAF 67 may additionally be used as an adhesion promoter in adhesive formulations.