Products

ELASTOSIL® SOLAR 3210 A/B is a pourable addition-curing RTV-2 silicone rubber specifically designed for coating, lamination, encapsulation, and molding applications. This product undergoes vulcanization at both room temperature and under heat, resulting in a transparent silicone rubber with excellent transmission properties and a moderate hardness. Cured ELASTOSIL® SOLAR 3210 A/B exhibits exceptional long-term stability against weathering, moisture, and UV light. It can withstand constantly changing climatic conditions, UV radiation, and temperatures up to 180 °C (356 °F) without any damage to the silicone elastomer.

GENIOSIL® GF 56 is an alkoxyvinylsilane. It is a clear, colorless liquid with a distinctive aromatic odor. In the presence of moisture, it undergoes hydrolysis (releasing ethanol) to form silanols, which can further react with each other to generate siloxanes. Acting as a bifunctional molecule, GENIOSIL® GF 56 serves as a molecular bridge between organic and inorganic substrates.

HELISOL® 10A is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 10 mm²/s. Its unique chemical structure sets it apart from organic materials like mineral oils, giving it exceptional properties. HELISOL® 10A is a clear, odorless, and colorless liquid.

ELASTOSIL® R 502/75 OH is a peroxide-crosslinking HCR silicone for the manufacture of silicone-insulated safety cables that maintain circuit integrity. In case of fire, ELASTOSIL® R 502/75 OH forms a ceramic-like layer with high insulation resistance, good mechanical stability, and low smoke formation.

HELISOL® 5A is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 5 mm²/s. Its unique chemical structure gives it exceptional properties that differentiate it from organic materials like mineral oils. HELISOL® 5A is a clear, odorless, and colorless liquid.

ELASTOSIL® R 700/40 OH is a high-consistency silicone rubber (HCR) grade for extrusion and molding applications. It provides good resistance to oil and fat. Postcured parts made from this material can be used for food contact applications and are suitable for use under the recommendation "XV. Silicones" of the BfR and FDA 177.2600. However, it is important to observe any given limitations on extractable and volatile substances.

ELASTOSIL® Film 2030 is a high-precision silicone film made from cross-linked silicone rubber. The film shows a maximum thickness variation across the total width of less than ±5%. The precision allows for constant electrical resistance and good comparative tracking resistance across a broad range of temperatures.

SILPURAN® 2122 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive with high adhesive strength. It belongs to the silicone gel category. SILPURAN® 2122 A/B can be used as a skin adhesive in medical applications. It has good adhesive properties that can be adjusted to suit specific requirements. Increasing the proportion of component A results in a softer vulcanizate and increased tackiness.

ELASTOSIL® P 26028 A/B is a pourable, addition-curing RTV-2 silicone rubber that cures at room temperature. It provides a very fast and non-shrink cure at room temperature, allowing for efficient and reliable mold-making. The main application of ELASTOSIL® P 26028 A/B is in the production of shrink-free molds with excellent reproduction accuracy.

ELASTOSIL® RT 625 A/B is a pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature. It is specifically designed for electronics reproduction molding applications. This product offers excellent mechanical properties and is flowable in nature. It is a two-component system that provides high-quality reproduction molding results.

ELASTOSIL® R 750/50 OH is a high-consistency silicone rubber (HCR) known for its exceptional resistance to high temperatures, oxygen, and dry heat. The vulcanizates produced from this product exhibit excellent performance under extreme conditions. It is specifically designed for applications that require resistance to high temperatures and is suitable for extrusion processes.

WACKER® Catalyst K 83 is a curing agent specifically designed for use in the Plastics and Elastomers industry. It falls under the category of Catalysts, Initiators & Crosslinkers. This catalyst is utilized in applications involving elastomers and plastics, specifically compatible with silicone polymers and resins. It is available in liquid form and exhibits transparent color properties. WACKER® Catalyst K 83 serves the function of facilitating the curing process in the production of elastomers and plastics.

ELASTOSIL® E43 N Transparent is a one-part, non-slump, self-leveling silicone adhesive. When exposed to air moisture, it cures at room temperature to yield a permanently flexible silicone rubber with very good mechanical properties. Fully cured ELASTOSIL® E43 N Transparent shows long-term stability against weathering, moisture, and UV radiation. The silicone elastomer may continuously be exposed to constantly changing climatic conditions, UV radiation, and temperatures as high as 180 °C without damage.

VINNEX® 2525 is a solid, thermoplastic homopolymer obtained through the polymerization of vinyl acetate. This resin is clear, colorless, and tasteless. It is commonly used for modifying biopolymers and biopolymer compounds, as well as for blending with natural fibers or flours like wood, starch, and cork.

VINNEX® 2526 is a solid, thermoplastic homopolymer derived from the polymerization of vinyl acetate. This clear and colorless resin possesses a tasteless quality. It finds common applications in the modification of biopolymers and biopolymer compounds, as well as in blending with natural fibers or flours such as wood, starch, and cork.

ELASTOSIL® R 500/50 OH is a peroxide-cured high-consistency silicone rubber (HCR) for general-purpose applications. This product can be used within a temperature range of -55 °C to +210 °C. The addition of heat stabilizers at service temperatures of more than 180°C is recommended.

ELASTOSIL® R 756/70 OH is a peroxide-cured high-consistency silicone rubber whose vulcanizates possess excellent resistance to hot air, particularly after the addition of a heat stabilizer. The vulcanizates of this product show good tear resistance, a low compression set, and are highly elastic.

VINNAPAS® B 60 FG is a solid, thermoplastic homopolymer. The clear and colorless resin is prepared by the polymerization of vinyl acetate. VINNAPAS® B 60 FG is tasteless. Applications include building and construction adhesives, composites and molding, do-it-yourself, industrial adhesives, industrial coatings, and resin modification.

ELASTOSIL® R 865/60 S provides a wide range of functional advantages. This material guarantees superior rebound resilience and minimal compression set. It can be easily pigmented using ELASTOSIL® PT Pigment Pastes and exhibits favorable processing characteristics. The various grades available, including ELASTOSIL® R 865/40 to ELASTOSIL® R 865/70, can be blended in any proportion to achieve intermediate hardness levels.

SILPURAN® 2114 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive with high adhesive strength. It belongs to the silicone gel category. SILPURAN® 2114 A/B can be used as a skin adhesive in medical applications. It has good adhesive properties that can be adjusted to suit specific requirements. Increasing the proportion of component A results in a softer vulcanizate and increased tackiness.

GENIOPERL® W36 is a polymer modifier with a linear structure based on functionalized silicone. It is specifically designed for use as a plastic additive. When incorporated into thermoset polymer systems, GENIOPERL® W36 enhances the impact strength, especially at low temperatures. Additionally, this product is formulated with internal anti-foam additives, which effectively reduce foam formation during vacuum casting processes.

VINNAPAS® UW 2 FS is a solid, thermoplastic homopolymer. The resin is clear, colorless, and tasteless, and it is produced by polymerizing vinyl acetate. This versatile product finds typical applications in fiber-reinforced plastics, adhesives, powder injection molding, and sound damping.

SILPURAN® 4200 is a non-slump, self-leveling silicone rubber formulation that cures at room temperature under the influence of atmospheric moisture to a silicone elastomer exhibiting good mechanical properties. SILPURAN® 4200 is designed for medical applications in compliance with Wacker Silicones' health care policy.

GENIOPLAST® Pellet 345 is a soft, highly transparent, thermoplastic elastomeric silicone copolymer. It serves as a processing aid for plastics processing, acting as a polymer additive to improve flow and mechanical properties. Additionally, it functions as a slip additive for bi-oriented Polypropylene films (BOPP).

ELASTOSIL® R 752/70 OH is a high-consistency silicone rubber (HCR) known for its unique properties. The vulcanizates produced from this product exhibit very low rebound resilience and high damping capability. It is particularly suitable for the manufacturing of low-modulus rubber articles using compression, transfer, or injection molding techniques.

Wacker Chemie Silane CHM-Dimethoxy is a colorless, clear liquid with a weak, characteristic odor. It is soluble in organic solvents and insoluble in water. This silane is used as a component of a Ziegler-Natta olefin polymerization catalyst system. It offers several performance advantages, including increased polymer yield per unit weight of catalyst, enhanced isotactic content of polypropylene-based polymers, and improved molecular weight dispersity of the polymer.

GENIOPLAST® Pellet S is a pelletized silicone gum formulation that contains a remarkably high loading of ultrahigh molecular weight (UHMW) siloxane polymer. It is primarily used as a plastic additive. Additionally, GENIOPLAST® Pellet S has the capability to enhance the burning characteristics of polyolefins when combined with halogen-free flame retardant fillers.

SILRES® 610 is a hard, solid silicone resin containing methyl groups. It is supplied in the form of solid flakes. A typical application is its use as a binder for high-temperature-resistant coatings after being dissolved in a suitable solvent. SILRES® 610 is utilized as a binder in coatings, offering a combination of heat resistance and weathering resistance. Additionally, it dries quickly, resulting in a film that is free from tackiness.

ELASTOSIL® R 865/50 S provides various functional advantages. This material delivers superior rebound resilience and minimal compression set. The compounds can be easily pigmented using ELASTOSIL® PT Pigment Pastes and exhibit favorable processing characteristics. The different grades available, ranging from ELASTOSIL® R 865/40 to ELASTOSIL® R 865/70, can be blended in any proportion to achieve intermediate hardness levels.

SILRES® BS 290 CF is a solventless silicone concentrate based on a mixture of silane and siloxane. Like SILRES® BS 290, it can be diluted with organic solvents. Dilute solutions of SILRES® BS 290 CF in organic solvents serve as high-quality general-purpose water repellents for impregnating and priming mineral and highly alkaline substrates.

ELASTOSIL® R 805/75 OH is a high-consistency silicone rubber (HCR) that produces vulcanizates with excellent resistance to engine oils and aggressive mineral oils, even at high temperatures. It is an oil-resistant, peroxide-curing silicone rubber. The vulcanizates exhibit good mechanical properties and a low compression set.

ELASTOSIL® E50 N Transparent is a flowable, one-part silicone rubber for potting, coating, or sealing applications. When exposed to air moisture, it cures at room temperature to yield a permanently flexible silicone rubber with very good mechanical properties. Fully vulcanized ELASTOSIL® E50 N Transparent shows long-term stability against weathering, moisture, and UV radiation. The silicone elastomer may continuously be exposed to constantly changing climatic conditions, UV radiation, and temperatures as high as 180°C without damage.

SIPELL® AE 34 is a non-ionic microemulsion of an amino-functional silicone fluid. It is primarily used as a hand-modifying additive to provide a pleasant, soft-soap hand feel. SIPELL® AE 34 finds its main application in the treatment of leather for cloth and furniture, where it helps enhance the tactile properties and softness of the treated material.

WACKER® FG 350 is a polydimethylsiloxane that is produced through the hydrolysis and polycondensation of dichlorodimethylsilane and chlorotrimethylsilane. The mean kinematic viscosity of WACKER® FG 350 at 25°C is 350mm²/s, determined by the degree of polymerization (n). This product is primarily used to control foam in lipophilic systems, particularly in foods rich in oil or fat, such as deep-frying oil. It is also utilized for surface treatment. Additionally, WACKER® FG 350 serves as a base material for producing antifoams that comply with the regulations for food intended for human consumption.

ELASTOSIL® R 500/40 OH is a peroxide-cured high-consistency silicone rubber (HCR) for general-purpose applications. This product can be used within a temperature range of -55 °C to +210 °C. The addition of heat stabilizers at service temperatures of more than 180°C is recommended.

SILPURAN® 2100 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive. It belongs to the silicone gel category. SILPURAN® 2100 A/B can be used as a skin adhesive in medical applications. It has good adhesive properties that can be adjusted to suit specific requirements. Increasing the proportion of component A results in a softer vulcanizate and increased tackiness.