Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Materials Features
- Specific Features
- Additive
- BfR compliant
- FDA compliant
- Low volatile
- Medical
Applications & Uses
- Plastics & Elastomers End Uses
- Use Level
- 2%
- Application Details
- ELASTOSIL® COLOR PASTE FL LIGHT BLUE RAL 260 80 15 has been developed particularly for coloring addition-curing ELASTOSIL® LR liquid silicone rubber and ELASTOSIL® RT RTV-2 silicone rubber.
- ELASTOSIL® COLOR PASTE FL LIGHT BLUE RAL 260 80 15 may be used for coloring silicone parts intended for sensitive applications and complying with the “Recommendation XV. Silicones" and “IX.
- Pigments for coloring plastics" of the BfR and FDA Regulation CFR 21 § 177.2600 "Rubber Articles Intended for Repeated Use" under observance of any given limitations on extractable and volatile substances.
- A statement regarding biocompatibility according to USP class VI and selected tests of ISO 10993 is available on request.
Processing
Before using ELASTOSIL® COLOR PASTES FL, the paste must be thoroughly stirred. This is also required if there has been a long interruption in production. It may be necessary to repeat this procedure in case of very long production runs. Depending on the color intensity desired, 0.5 to 4.0 % pigment paste should be added, the usual dosage being 2%. Generally, the dosage should be kept at a minimum. In individual cases, an excess of color paste may slow down the curing characteristics. Customers may produce other colors by mixing pigment pastes. Suggestions for formulations can be provided on request.
Properties
- Color
- Physical Form
- Typical Properties
- Properties
ELASTOSIL® COLOR PASTE FL LIGHT BLUE RAL 260 80 15 is pourable and ready-to-use after stirring up. A dilution is not required. The colors have generally a good resistance to sunlight, UV and hot air. The resistance should be checked for individual cases, especially for long term applications. If the dosage recommendations are followed, the mechanical properties of the colored vulcanizates will not be significantly impaired.
- Note
- Density Cure Conditions: 15 min / 100°C evacuated, without press
- Color Cure Conditions: 2% in LR 3003/50, 5 min / 165°C in press
- Color Measurement Conditions: CIE 1976 D65, 10°, d/8
| Value | Units | Test Method / Conditions | |
| Coloristical Properties (a* Value) | -3 | — | DIN 5033 |
| Coloristical Properties (b* Value) | -14 | — | DIN 5033 |
| Coloristical Properties (L* Value) | 80 | — | DIN 5033 |
| Density | 1.29 | g/cm³ | DIN EN ISO 1183-1 A |
| Dynamic Viscosity (Shear rate 1 s⁻¹) | 20000 | mPa·s | DIN EN ISO 3219 |
| Dynamic Viscosity (Shear rate 10 s⁻¹) | 5000 | mPa·s | DIN EN ISO 3219 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability
- Packaging Information
This product is available in 20 kg pail and 1kg tin.