Products in Exterior & Body: Acrylonitrile Butadiene Styrene (ABS)

MOCOM Compounds ALCOM® LB ABS 1000 15018 WT1029-15 is a pre-dried acrylonitrile/butadiene/styrene/copolymer containing a special filler, designed for highly reflective and opaque automotive and lighting components such as light guides and reflectors. It should be processed with a melt temperature of 220-260°C and a mold temperature of 50-80°C. The maximum moisture content should not exceed 0.02%.

MOCOM Compounds ALCOM® AWL 15/1 WT1471-04LB is a pre-dried Acrylonitrile/Butadiene/Styrene/Copolymer blend containing 15% special filler, which is highly reflective and opaque. It is designed for applications in the automotive and various market segments, such as lighting and light blocking components, light guides, and reflectors. The material should be processed using injection molding with a melt temperature of 220-260°C and a mold temperature of 50-80°C. It should not exceed a maximum moisture content of 0.02%.

MOCOM Compounds ALCOM® AWL 15/1 UV WT1471-04LB is a base polymer of Acrylonitrile/Butadiene/Styrene/Copolymer with a filler/additive system of 15% special filler. It is highly reflective, opaque, and UV stabilized, used in the automotive and lighting markets for applications such as light guides and reflectors. Processing injection molding requires a melt temperature of 220-260°C and a mold temperature of 50-80°C. This product should be stored in a dry, light-protected environment.

MOCOM Compounds ALCOM® AWL 10 WT1308-05LB is a base polymer composed of Acrylonitrile/Butadiene/Styrene/Copolymer containing 10% special filler. It has special features such as high reflectivity and opacity and is used for automotive and lighting applications, such as light guides and reflectors. To process this polymer, injection molding with a melt temperature of 220-260°C and a mold temperature of 50-80°C should be used. It should also be stored in a dry, light-protected area.

MOCOM Compounds ALCOM® AWL 15/2 WT1471-04LB is a base polymer of Acrylonitrile/Butadiene/Styrene/Copolymer filled with 15% special filler. It is highly reflective, opaque, and has good flow. This polymer is mainly used in lighting and light blocking components such as light guides and reflectors, primarily in the automotive market segment. For injection molding, it requires a melt temperature of 220-260°C and a mold temperature of 50-80°C. It should be stored in a dry place, away from direct light.

MOCOM Compounds ALCOM® AWL 10/3 WT1308-05LB is a base polymer of Acrylonitrile/Butadiene/Styrene/Copolymer that is opaque, highly reflective, heat stabilized, and has easy flow. It is suitable for markets such as Automotive and various application areas like lighting and light blocking components. Typical applications include light guides and reflectors.

MOCOM Compounds ALCOM® AWL 15/1 WT31-956LB is a pre-dried acrylonitrile/butadiene/styrene/copolymer that contains a 15% special filler system, designed for automotive and various applications such as lighting and light blocking components, like light guides and reflectors. It has a high reflectivity and opacity. For injection molding, a melt temperature of 220-260°C and a mold temperature of 50-80°C should be used, and the maximum moisture content should not exceed 0.02%.

Elix™ ABS E-LOOP P2MC CR is a versatile, general-purpose grade ABS resin that offers good flow and excellent colorability, making it an ideal choice for the production of self-colored molded plastic articles. This ABS resin is designed for industrial and professional use and is suitable for a wide range of consumer goods applications, including toys for sports and recreation. Its superior flow properties and good colorability make it a popular choice for manufacturers looking to produce high-quality plastic products. Elix™ ABS E-LOOP P2MC CR is available in pellet form, ensuring ease of processing and optimal performance in injection molding applications.

High heat resistance ABS plating grade. Benefits: Enhanced heat resistance; Better dimensional under heat; Excellent balance of heat resistance, impact strength and flowability. Typical Applications: Decorative interior parts, Profiles, Radiator grille, Tailgate handles. Chemical Composition: Acrylonitrile-butadiene-styrene (ABS) copolymer modified with poly(styrene-co-maleimide) (SMI).

Very high heat resistance ABS plating grade. Major Benefits: Extreme impact resistance with low temperature ductility; Very high impact up to -30ºC; Well balanced flowability, heat resistance and flexibility; Low emission and odor grade; Lower mold deposits in injection molding processing applications; Good dimensional precision, low shrinkage and CLTE; Lower density than PC/ABS; Typical Applications; Decorative interior parts, Radiator grille. Chemical composition: Acrylonitrile-butadiene-styrene (ABS) copolymer modified with polycarbonate and poly(styrene-co-maleimide). ISO shortname: ISO 2580-1 ABS 2-X, MG, 115-15-35-20.

ADDITER® PMD 70065 is an Acrylonitrile Butadiene Styrene (ABS) material. For SDS, please contact Addiplast Group using the 'Request Document' button.

Increased chemical resistance compared to P2H-AT, contains antistatic additive. Major Benefits: Chemical resistance; High gloss; Medium impact. Typical Applications: Telephones, Electronic boards, housings, Refrigerator door handles.

High heat resistance ABS. ISO shortname: ISO 2580-1 ABS 1-M, MG, 105-15-16-20. Benefits: Excellent balance of impact strength and flowability; Super low emission grade; Lower mold deposits in injection molding processing applications; Better dimensional under heat. Chemical Composition: Acrylonitrile-butadiene-styrene (ABS) copolymer modified with poly(styrene-co-maleimide) (SMI)

High heat resistance ABS. Benefits: Increased flow; Good process ability behavior; Super low emission grade; Lower mold deposits in injection molding processing applications; Better dimensional under heat. Chemical Composition: Acrylonitrile-butadiene-styrene (ABS) copolymer modified with poly(styrene-co-maleimide) (SMI).

High heat resistance, PC-modified, low emission, increased flow. Typical Applications: Radiator grille, Rear light housing, Tailgate cover, Door components, Instrument panel parts.

Very high heat resistance ABS with extreme impact resistance. Benefits: Extreme impact resistance with low temperature ductility; Very high impact up to -30°C; Well balanced flowability and heat resistance; Lower density than PC/ABS; Low emission and odor grade; Lower mold deposits in injection molding processing applications; Better dimensional under heat. Chemical Composition: Acrylonitrile-butadiene-styrene (ABS) copolymer modified with polycarbonate and poly(styrene-co-maleimide). ISO shortname: ISO 2580-1 ABS 2-X, MG, 115-15-35-20.

ABS good mechanical properties, good weatherabilit. For SDS, please contact Addiplast Group using the 'Request Document' button.

Medium/high heat grade with superior impact resistance, PC-modified, low emission. Major Benefits: Low emission; Very high impact (PC modified). Typical Applications: Radiator grille, Tailgate cover, Glove box, Instrument panel parts.

Electroplating grade. Benefits: High Galvano quality for class A surfaces; High flowability. Applications: Shower heads and other sanitary chromed parts, Cosmetic packaging, chromed kitchen products.

Elix™ ABS DP M116GF is High flow GF reinforced ABS (16%). Major Benefits: Excellent balance of impact strength, rigidity and flowability; Good dimensional stability; High rigidity. Typical Applications: Semi-structural Automotive interior parts, Exterior Automotive pillars, Air conditioner fan. Chemical composition: Acrylonitrile-Butadiene-Styrene Copolymer with Glass Filler.

ROTEC® ABS 5001 is ABS, injection molding grade, high-impact.

ABS 448TUV Type Natural is high gloss, high impact, molding grade ABS and ABS w/UV

Sindustris ABS LER572 has heat resistance.

KRALASTIC MTH-2 is a heat resistance ABS resin heat resistant grade.

KRALASTIC KU-630 R-3 is a super heat resistance ABS resin heat resistant grade.

ROTEC® ABS 1001 F is ABS, injection molding grade, easy-flowing.

InnoKril® ABS M0111000000485 is a ABS. It is UV, heat Stabilized and is available in white color.

KRALASTIC K-2938FSR-1 is a heat resistance and high flow ABS resin heat resistant grade.

Global ABS-501 High Impact Extrusion Grade ABS is Poly(Acrylonitrile Butadiene Styrene) thermoplastic.

ABS-2611-01 are environmental friendly recycled ABS flakes which has good impact and good fluidity.

AGR 15 is a ABS Glass Filled 15%.

ABS GTR-10 It is extensively used in a wide range of applications, including toys, home articles, home electric appliances, OA equipment, exterior, and interior automotive parts, etc.

Reprocesed ABS 20% Fiberglass Reinforced

Starex PT-0180J by LOTTE Advanced Materials is comprised of Acrylonitrile Butadiene Styrene. It is commonly used

Starex LH-0300 by LOTTE Advanced Materials is comprised of Acrylonitrile Butadiene Styrene. It is commonly used

Starex SV-0165 U by LOTTE Advanced Materials is comprised of Acrylonitrile Butadiene Styrene. It is commonly used