Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Typical Properties
- Optical Properties
- Flammability
- Processing Information (Injection Molding)
- Rheological Properties
| Value | Units | Test Method / Conditions | |
| Flexural Modulus | 2600.0 | MPa | ISO 178 |
| Flexural Stress (3.5% Strain) | 73.0 | MPa | ISO 178 |
| Tensile Modulus | 2400.0 | MPa | ISO 527 |
| Tensile Stress at Yield | 49.0 | MPa | ISO 527 |
| Tensile Elongation at Yield | 2.9 | % | ISO 527 |
| Tensile Elongation at Break | 11.0 | % | ISO 527 |
| Impact Strength (Charpy, at 23°C) | 175.0 | kJ/m² | ISO 179/1eU |
| Impact Strength (Charpy, at -40°C) | 95.0 | kJ/m² | ISO 179/1eU |
| Notched Impact Strength (Charpy, at 23°C) | 15.0 | kJ/m² | ISO 179/1eA |
| Notched Impact (Charpy, at -40°C) | 5.0 | kJ/m² | ISO 179/1eA |
| Ball Indentation Hardness (H358/30) | 100.0 | MPa | ISO 2039-1 |
| Value | Units | Test Method / Conditions | |
| Density | 1090.0 | kg/m³ | ISO 1183 |
| Value | Units | Test Method / Conditions | |
| Vicat B50 | 106.0 | °C | ISO 306 |
| HDT / A (1.8 MPa) | 91.0 | °C | ISO 75-1/-2 |
| Value | Units | Test Method / Conditions | |
| Moisture Content | max. 0.02 | % | — |
| Value | Units | Test Method / Conditions | |
| Tristimulus Value Y10 of Reflection | 68.0 | % | DIN 5033 |
| Tristimulus Value Y10 of Transm.,d=0.5mm | 0.1 | % | ISO 13468 |
| Value | Units | Test Method / Conditions | |
| Glow Wire (GWFI, 650°C, 1mm) | Passed | — | DIN EN 60695 |
| Glow Wire (GWFI, 650°C, 2mm) | Passed | — | DIN EN 60695 |
| Value | Units | Test Method / Conditions | |
| Melt Temperature | 220 - 260 | °C | — |
| Mould Temperature | 50 - 80 | °C | — |
| Value | Units | Test Method / Conditions | |
| Melt Index (MVR) | 5.0 | cm³/10min | ISO 1133 |
| MVR Temperature | 220.0 | °C | — |
| MVR Load | 10.0 | kg | — |
| Shrinkage (24h) | 0.5 - 0.8 | % | ISO 294-4 |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- 80 °C in a dry air (dessiccant) dryer for 2-4 h
- 80 °C in an air circulating dryer for 4-8 h
Storage & Handling
- Storage Conditions
Store in dry, protected from light.