Products in Automotive: Polyamide 6 (PA 6)

Akulon® Ultraflow K-FHG7 /A is a high-performance polyamide 6 and polyamide 66 material utilized worldwide across various applications, including automotive, electronics, electrical, furniture, and packaging. It excels in molded parts, striking an impressive balance between design flexibility and processing ease, while delivering outstanding mechanical properties over a wide temperature range and in diverse conditions. In extrusion, it establishes industry standards, boasting exceptional strength, resilience, and ease of processing. Injection molding is the preferred method, and key features encompass 35% glass reinforcement, heat stabilization, and high flow capabilities.

Akulon® N24-G7 is a high-performance material that combines the properties of polyamide 6 and polyamide 66, making it a favored choice for customers worldwide across various industries, including automotive, electronics, electrical, furniture, and packaging. In molded parts, this material excels in providing an exceptional balance between ease of design and processing, while delivering outstanding mechanical properties over a wide temperature range and under diverse conditions.

Akulon® Ultraflow K-FHGM35 is a high-performance polyamide 6 and polyamide 66 material trusted globally across a spectrum of applications, including automotive, electronics, electrical, furniture, and packaging. In molded parts, it excels in delivering an impressive combination of design flexibility and ease of processing, alongside exceptional mechanical properties over a broad temperature range and diverse conditions. For extrusion, it establishes industry benchmarks with its exceptional strength, resilience, and ease of processing. Injection molding is the preferred method, and key features encompass 15% glass reinforcement, 25% mineral reinforcement, heat stabilization, and high flow capabilities.

Akulon® Fuel Lock FL40-HPX1 NA99001 is a polyamide 6 (PA 6) resin known for its fuel resistance, good barrier properties, impact modification, light weight, and low permeability. It finds valuable applications in the automotive and transportation markets, as well as in the consumer goods industry.

MOCOM Compounds ALCOM® PA6 900/11 GF10 MR20 SV12-778MCF is a pre-dried polyamide 6 containing 10% glass fibers, 20% mineral, and has a silver, metallic effect. It has a low tendency to produce flow lines and low warpage, is highly heat-stabilized and is typically used for automotive and other applications such as housings and engine covers. It is processed by injection molding with a melt temperature of 270-290°C and a mold temperature of 80-100°C.

MOCOM Compounds Alcom® TCD PA6 5060 FR 15090 is a polyamide 6 (PA6) material that contains a special filler system, making it thermally conductive, electrically insulating, and halogen-free flame retardant. It is also opaque and heat stabilized, making it suitable for use in radiator systems and cooling systems in the automotive, machinery, electrical and electronic, and lighting industries.

MOCOM Compounds Alcom® TCD PA6 5070 FR 15021 is a polyamide 6-based polymer with a special filler that makes it thermally conductive, electrically insulating, heat stabilized, and halogen-free flame retardant. It is suitable for a variety of markets such as Automotive, Machinery, electrical and electronic, and Lighting, and is particularly ideal for radiator systems and cooling systems. Typical applications include housings, functional components, plugs/connectors, and lamp sockets.

MOCOM Compounds ALTECH® PA6 B 2015/106 GF15 is a polyamide 6 with 15% glass fibers. It is high heat stabilized, has high surface gloss, is processing stabilized and has easy release (demolding) properties. It is popularly used in the automotive, machinery, electrical and electronic industries for injection molded parts such as handles, housings, functional components, and operating elements. For optimal performance, it should be protected from light and stored at temperatures not exceeding 30°C. For injection molding, the recommended melt temperature is 270-290°C and the mold temperature should be 80-100°C.

MOCOM Compounds ALTECH® PA6 B 2025/309 GF25 is a polyamide 6 base polymer with 25% glass fiber filler/additive system. It is suitable for injection molding, with melt temperatures of 270-290°C and mold temperatures of 80-100°C, and has special features such as easy release (demolding), easy flow, processing stabilization and heat stabilization. It is suitable for the automotive, machinery, building and construction market segments, and can be used for injection molded parts, exterior parts, housings, functional components and air ducts.

MOCOM Compounds ALTECH® ECO PA6 4230/100 GF10 MR20 is a heat-stabilized polyamide 6 blend with 10% glass fibers and 20% mineral. Pre-drying is recommended at 80°C in a dry air (dessiccant) dryer for 2-12 hours, depending on moisture content, with a maximum moisture content of 0.15%. It is suitable for injection molding with a melt temperature of 270-290°C and a mold temperature of 80-100°C. It is typically used in the automotive market for engine covers and housings, and should be stored in a dry and light-protected environment not exceeding 30°C to ensure optimal properties.

MOCOM Compounds ALCOM® LB PA6 2015 14041 GF15 WT1100-14 is a polyamide 6 base polymer filled with 15% glass fibers and a special filler, providing high stiffness and highly reflective, opaque properties. It is used in the Automotive and Lighting Market segments, with typical applications being reflectors and light blocking components. For processing via injection molding, the melt temperature should be 270-290°C and the mold temperature should be 80-100°C.

MOCOM Compounds ALTECH® PA6 B 2030/500 GF30 is a polyamide 6-based polymer with a 30% glass fiber filler/additive system. It is glycol, hot oil, and chemically resistant, has good flow, easy release properties, and is highly heat stabilized. This polymer is suitable for automotive, building and construction, and machinery applications, and can be used in the manufacturing of engine and drive systems, injection molded parts, clothing/fasteners, and exterior parts. Typical applications include different automotive powertrain parts, oil pans/sumps, and functional components, as well as housings.

MOCOM Compounds ALTECH® PA6 A 3050/100 GB50 is a polyamide 6 base polymer with a 50% glass bead filler/additive system designed for low warpage, easy flow, easy release (demolding), and high heat stabilization. This product is used in the automotive and machinery industries to create injection molded parts, interior decoration/finishing, and exterior parts such as housings, handles, and functional components. For long-term storage, it should be kept dry in a protected area away from light, not exceeding 30°C.

MOCOM Compounds ALTECH® PA6 B 2030/209 GF30 is a heat-stabilized, easy-release and easy-flow polyamide 6 reinforced with 30% glass fibers, designed for automotive, electrical and electronic, sport, and leisure applications. For injection molding, the melt temperature should be between 270-290°C and the mold temperature should be between 80-100°C. Common applications include housings, handles, functional components, and injection-molded parts. This product should be stored in a cool, dark place, not exceeding 30°C.

MOCOM Compounds ALTECH® PA6 A 3230/100 GF10 GB20 is a heat-stabilized, easy-flow, easy-release (demolding) and fast-solidifying polyamide 6-based compound with a filler/additive system of 20% glass beads and 10% glass fibers. It is suitable for exterior parts and injection-molded parts and is commonly used in automotive, building, and construction applications for functional components and housings.

MOCOM Compounds ALTECH® PA6 A 1000/149 FR is a polyamide 6 base polymer with flame retardant, halogen-free flame retardant, and heat stabilized special features. It is used for injection molded parts, exterior parts, and electrical components in the automotive, electrical and electronic, and machinery market segments. Pre-drying conditions should be 80°C in a dry air (dessiccant) dryer for 2-12 hours, depending on the moisture content, with a maximum moisture content of 0.15%. Processing injection molding should be done at a melt temperature of 250-270°C and a mold temperature of 40-80°C. Typical applications include housings, different automotive powertrain parts, and functional components.

MOCOM Compounds ALTECH® PA6 A 2020/109 GF20 is a polyamide 6 filler/additive system with 20% glass fibers, heat stabilized, fast solidifying, processing stabilized, and nucleated, providing easy release (demolding). It is suitable for automotive, electrical and electronic, and machinery applications, and is typically used for functional components, different automotive powertrain parts, engine covers, and injection molded parts.

MOCOM Compounds ALCOM® LB PA6 2015 14041 WT1063-16 is a polyamide 6 with 15% glass fibers and 8% special filler. It has a high reflectivity, opacity, and is equipped with a slip agent and heat stabilizer. It is used in the automotive, electrical and electronic, and lighting industries for lighting, interior decoration/finishing, and light blocking components such as light guides, reflectors, and handles.

MOCOM Compounds ALTECH® PA6 A 2030/326 GF30 UV is a UV stabilized, processing stabilized, and nucleated Polyamide 6 with 30% glass fibers. It is suitable for injection molded parts, electrical components, exterior parts, and interior decoration/finishing applications in the Automotive, Machinery, Building, and Construction, and Sport and Leisure market segments. Pre-drying conditions should be 80°C in a dry air (desiccant) dryer for 2-12 hours, depending on moisture content, with a maximum moisture content of 0.15%. Processing parameters include a melt temperature of 270-290°C and a mold temperature of 80-100°C. It should be stored dry and protected from light, not above 30°C.

MOCOM Compounds ALTECH® PA6 A 2015/310 GF15 IM is a Polyamide 6 base polymer, impact modified, heat stabilized, injection molding grade, and nucleated with 15% glass fiber filler/additive system and processing stabilized. For processing injection molding, the melt temperature should be between 270-290°C and mold temperature between 80-100°C. Typical applications include housings, operating elements, impact protection/shock absorbers, and functional components. This product is suitable for the Machinery, Electrical and Electronic, and Automotive market segments. It should be stored in a dry and light-protected environment, not above 30°C, to ensure its optimal performance.

MOCOM Compounds ALTECH® PA6 A 4030/100 MR30 is a polyamide 6-based polymer with a 30% mineral filler/additive system. It has low warpage, is processing and heat stabilized, and is suitable for automotive, sport, and leisure applications such as exterior parts, interior decoration/finishing, and injection molded parts, housings, and functional components.

MOCOM Compounds ALTECH® PA6 A 2040/100 GF40 is a high-heat stabilized, easy-release, easy-flow, and processing-stabilized polyamide 6 reinforced with 40% glass fibers. The recommended melt temperature for injection molding is between 270-290°C, while the mold temperature should be between 80-100°C. This product is primarily used in the automotive, machinery, electrical, and electronic market segments, and is suitable for making housings, functional components, operating elements, and injection molded parts for interior decoration/finishing, exterior parts, and electrical components.

MOCOM Compounds ALTECH® PA6 A 4230/540 MR20 GF10 FR is a polyamide 6 injection molding grade featuring a base polymer of polyamide 6, a 30% glass fiber/mineral filler/additive system, flame retardant, heat stabilized, low warpage, and halogen-free flame retardant. This grade is suitable for use in the Automotive, electrical, and electronic markets, with typical applications including functional components, housings, lamp covers, electrical and electronic (E&E) components, exterior parts, and interior decoration/finishing. Injection molding should be done with a melt temperature of 270-290°C and a mold temperature of 80-100°C.

MOCOM Compounds ALTECH® PA6 A 1000/310 IM is a polyamide 6 base polymer with special features including high impact modified, low temperature impact modified, heat stabilized, and easy release (demolding) properties. It is suitable for injection molding with a melt temperature of 250-270°C and a mold temperature of 40-80°C. This polymer is suitable for a variety of applications including automotive, building and construction, and furniture, such as housings, different automotive powertrain parts, and functional components. It should be stored in a dry, light-protected environment not exceeding 30°C and kept away from high temperatures and direct sunlight.

MOCOM Compounds ALTECH® PA6 A 2010/100 GF10 is a heat-stabilized, fast-solidifying, easy-release (demolding) and processing-stabilized, nucleated polyamide 6 with 10% glass fibers, designed for applications such as injection-molded parts, functional components, interior decoration/finishing, and exterior parts. It should be pre-dried at 80°C in a dry air (desiccant) dryer for 2-12 hours, depending on moisture content, with a maximum moisture content of <0.15%. It should be processed with injection molding at a melt temperature of 270-290°C and a mold temperature of 80-100°C. It is suitable for market segments such as automotive, building, and construction.

MOCOM Compounds ALTECH® PA6 A 2030/109 GF30 is a Polyamide 6 polymer with 30% glass fibers heat stabilized and easy release (demolding) filler/additive system. It is suitable for injection molding with a melt temperature of 270-290°C and a mold temperature of 80-100°C. This material is suitable for multiple market segments, such as automotive, machinery, building and construction, and is typically used for injection molded parts, exterior parts, interior decoration/finishing, engine and drive systems. To ensure its optimum performance, it should be stored in a cool, dry place, and not exposed to temperatures above 30°C.

MOCOM Compounds ALTECH® PA6 A 2050/100 GF50 is a heat stabilized, easy-release (demolding) injection molding grade that is nucleated and processing stabilized with 50% glass fibers. Pre-drying conditions should be 80°C in a dry air (dessiccant) dryer for 2-12 hours, depending on moisture content, with a maximum moisture content of less than 0.15%. Processing injection molding should be with a melt temperature of 270-290°C and a mold temperature of 80-100°C. It is suitable for machinery, automotive, electrical and electronic applications such as housings, different automotive powertrain parts, functional components, protection-strips, and air ducts.

MOCOM Compounds ALTECH® PA6 A 3030/109 GB30 BK12-950 is a high heat stabilized polyamide 6 with a 30% glass beads filler/additive system, designed for injection molding applications in the automotive, machinery, electrical, and electronic markets. The melt temperature should be 270-290°C, and the mold temperature should be 80-100°C. Typical applications include housings, engine covers, different automotive powertrain parts, and parts for scooters and motorcycles.

MOCOM Compounds ALCOM® PA6 900/1 GF30 WT1165-10LB is a polyamide 6 base polymer filled with 30% glass fibers, featuring a highly reflective, opaque, and slip agent property. It is suitable for automotive, various lighting, light blocking components, and interior decoration/finishing applications such as light guides, reflectors, and handles. The recommended melt temperature range for processing injection molding is 270-290°C, and the mold temperature range is 80-100°C.

MOCOM Compounds ALTECH® PA6 A 2330/500 is a heat stabilized, improved surface appearance and easy release polyamide 6 with a 20% glass fiber and 10% glass bead filler/additive system. It is suitable for many market segments, such as automotive, machinery, building and construction, and can be used for injection molded parts, electrical components, and exterior parts. Typical applications include air ducts, housings, and functional components.

MOCOM Compounds ALTECH® PA6 A 2030/606 GF30 is a polyamide 6-based material with 30% glass fibers that is nucleated and processing-stabilized for easy release (demolding). It is suitable for injection molding applications with a melt temperature of 270-290°C and a mold temperature of 80-100°C. This material is primarily used in the automotive market for cooling system, engine and drive system components, such as oil pump parts, housings, and functional components.

MOCOM Compounds ALTECH® PA6 A 2050/500 GF50 is a polyamide 6 injection molding grade with 50% glass fibers, heat-stabilized and easy-release features. It is suitable for automotive, machinery, electrical and electronic, furniture, building and construction, sport and leisure applications. Pre-drying is required in a dry-air (desiccant) dryer at a temperature below 80°C for 2-12 hours, depending on the moisture content, and the melt temperature should be between 270-290°C, with a mold temperature of 80-100°C. The material is laser etchable (light etching) and has good flow characteristics.

MOCOM Compounds ALTECH® PA6 A 3030/109 GB30 BK1162-14 is a polyamide 6 base polymer containing 30% glass beads and is high heat stabilized with easy release, low warpage, and easy flow. It is suitable for injection molding with a melt temperature ranging from 270-290°C and a mold temperature ranging from 80-100°C.

MOCOM Compounds ALTECH® PA6 A 3030/220 GB30 UV is a polyamide 6 base polymer with a 30% glass bead filler/additive system. It is heat-stabilized, easy to release (demolding), UV-stabilized, and processing-stabilized, making it suitable for use in electrical and electronic, automotive, clothing/fasteners, injection molded parts, electrical components, exterior parts, and interior decoration/finishing market segments. Typical applications include housings, functional components, and operating elements.

MOCOM Compounds ALTECH® PA6 A 2025/109 GF25 is a heat-stabilized, fast-solidifying, and easy-release polyamide 6 with a 25% glass fiber filler/additive system. It is suitable for injection molding and the recommended pre-drying conditions are 80°C in a dry air (dessiccant) dryer for 2-12 h depending on moisture content, with a maximum moisture content of <0.15%. The recommended melt temperature is 270-290°C and the recommended mold temperature is 80-100°C. Its market segment is Machinery, Automotive, electrical and electronic, and its typical applications are housings, functional components, and handles. It should be stored and protected from light, not exceeding 30°C.

MOCOM Compounds ALTECH® PA6 A 1000/199 BK1129-12LS is a polyamide 6 base polymer with fast solidifying, easy release (demolding), and easy flow properties. It is suitable for injection molding with a melt temperature of 250-270°C and a mold temperature of 40-80°C. It is suitable for market segments such as automotive and typical applications including housings, handles, functional components, and injection molded parts. It is also laser etchable (light etching) and should be kept dry and stored in a location where the temperature is no higher than 30°C.