Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Typical Properties
- Optical Properties
- Processing Information (Injection Molding)
- Rheological Properties
| Value | Units | Test Method / Conditions | |
| Flexural Modulus (Dry) | 8700.0 | MPa | ISO 178 |
| Flexural Modulus (Conditioned) | 4700.0 | MPa | ISO 178 |
| Flexural Strength (Dry) | 185.0 | MPa | ISO 178 |
| Flexural Strength (Conditioned) | 105.0 | MPa | ISO 178 |
| Tensile Modulus (Dry) | 9400.0 | MPa | ISO 527 |
| Tensile Modulus (Conditioned) | 4800.0 | MPa | ISO 527 |
| Tensile Strength at Break (Dry) | 122.0 | MPa | ISO 527 |
| Tensile Elongation at Break (Dry) | 2.0 | % | ISO 527 |
| Tensile Strength at Break (Conditioned) | 65.0 | MPa | ISO 527 |
| Tensile Elongation at Break (Conditioned) | 4.0 | % | ISO 527 |
| Impact Strength (Dry, Charpy, at 23°C) | 39.0 | kJ/m² | ISO 179/1eU |
| Impact Strength (Conditioned, Charpy, at 23°C) | 50.0 | kJ/m² | ISO 179/1eU |
| Impact Strength (Dry, Charpy, at -40°C) | 36.0 | kJ/m² | ISO 179/1eU |
| Notched Impact Strength (Dry, Charpy, at 23°C) | 6.0 | kJ/m² | ISO 179/1eA |
| Notched Impact Strength (Conditioned, Charpy, at 23°C) | 8.5 | kJ/m² | ISO 179/1eA |
| Notched Impact (Dry, Charpy, at -40°C) | 4.0 | kJ/m² | ISO 179/1eA |
| Value | Units | Test Method / Conditions | |
| Density (Dry) | 1420.0 | kg/m³ | ISO 1183 |
| Value | Units | Test Method / Conditions | |
| HDT / A (Dry, 1.8 MPa) | 205.0 | °C | ISO 75-1/-2 |
| DSC (Melt Point, Dry) | 220.0 | °C | ISO 11357 |
| Value | Units | Test Method / Conditions | |
| Moisture Content | max. 0.15 | % | — |
| Value | Units | Test Method / Conditions | |
| Tristimulus Value Y10 of Reflection | 84.0 | % | DIN 5033 |
| Tristimulus Value Y10 of Transm.,d=0.5mm | 0.8 | % | ISO 13468 |
| Value | Units | Test Method / Conditions | |
| Melt Temperature | 270 - 290 | °C | — |
| Mould Temperature | 80 - 100 | °C | — |
| Value | Units | Test Method / Conditions | |
| Shrinkage (Lengthwise, 24h) | 0.1 - 0.3 | % | ISO 294-4 |
| Shrinkage (Lateral, 24h) | 0.6 - 0.8 | % | ISO 294-4 |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
80 °C in a dry air (dessiccant) dryer for 2-12 h
Storage & Handling
- Storage Conditions
Store in dry, protected from light.