Products in Tires: Resin

Aegis® H95ZI resin is a medium viscosity, nylon 6 extrusion grade homopolymer for high-strength monofilament and multifilament applications with typical filament tenacities of 5.0-9.0 gpd

Aegis® H100ZP is a medium viscosity, nylon 6 extrusion grade homopolymer for cast or blown film applications. The resin product complies with all food contact regulations. Aegis® H100ZP homopolymer combines strength, toughness and thermoforming properties with excellent heat, chemical and abrasion resistance.

Aegis® H100NP resin is a medium-viscosity nylon 6 extrusion grade homopolymer for cast or blown film. It offers a combination of strength, toughness and thermoforming properties as well as excellent heat, chemical and abrasion resistance.

Arnitel® PL461 is a high-performance thermoplastic copolyester (TPC) known for its combination of flexibility, high temperature resistance, and strength, complemented by excellent processing characteristics. In industries such as automotive and E&E, Arnitel® PL461 is becoming a more sustainable and efficient alternative to traditional rubbers, leading to reduced environmental impact and lower system costs. This material can be processed using injection molding technology, making it suitable for a variety of applications.

MOCOM Compounds ALTECH® ECO PA66 4015/120 MR15 IM is a Polyamide 66-based polymer with 15% talcum filler/additive system, impact modified and heat stabilized for easy release (demolding), suitable for injection molding with a melt temperature of 280-300°C and a mold temperature of 80-100°C. It is primarily used in automotive applications such as wheel trims and parts.

NITRIFLEX® Styrene Butadiene Resin (SBR) S-6H by Valex Group is commonly used as Reinforcing Resin for a variety of applications. It is available in Powder form.

NITRIFLEX® Styrene Butadiene Resin (SBR) S-6H PA by Valex Group is commonly used as Reinforcing Resin for a variety of applications. It is a Dust-free

ALNOVOL® UF 410 RPC, a carbamic resin on silica, demonstrates compatibility with various synthetic and natural rubbers. Notably, its composition prevents the formation of a clear solution in solvents due to the silica carrier. Primarily functioning as a crosslinking agent and binder, this resin is specifically designed for applications in tires. Its elastomeric functions contribute as a resin within this context.

This product is a polyurethane system. Mechanical data according to test pieces post-cured for 8 hrs. at 80°C. No heavy chemical and mechanical stress before 7 days after curing at room temperature (20-23°C).

This product is a polyurethane system. Mechanical data according to test pieces post-cured for 8 hrs. at 80°C. No heavy chemical and mechanical stress before 7 days after curing at room temperature (20-23°C).

This product is a polyurethane system. After use please close the containers carefully. The product can be subject to color variations due to raw materials, but these color variations have no influence on the quality and the properties of the product. Seal porous mold surfaces first (ebalta mold sealer). For optimum mold releasing we recommend a special release agent (like T1-1), which can be applied easily with a brush or be sprayed. Releasing of the mold 2-3 times, evaporate for about 20 min. after each releasing.

Taizhou Huangyan Donghai Chemical Tackifying resin 203 (1068) is a thermoplastic p-tertylphenol-formaldehyde adhesive resin.

This product is a Polyurethane system If the product is cured at room temperature, no entire chemical and mechanical load before 7 days after curing.

This product is a polyurethane system. After use please close the containers carefully. The product can be subject to color variations due to raw materials, but these color variations have no influence on the quality and the properties of the product. Seal porous mold surfaces first (ebalta mold sealer). For optimum mold releasing we recommend a special release agent (like T1-1), which can be applied easily with a brush or be sprayed. Releasing of the mold 2-3 times, evaporate for about 20 min. after each releasing.

Rubaloy RA - 703G is a non-staining, oil, ozone, abrasion, weather and flex resistant polymer using medium ACN (33%) content Acrylonitrile Butadiene Rubber and a special grade of Poly Vinyl Chloride Resin. This grade has improved extrusion rate, extrusion, molding and surface finish. Rubaloy-703G is Pthalate free.

Polimersan Plastics Polipa (PA 6) is one of the most preferred Polymer due to resistance to bending and wearing, perfect performance balance and low cost.

JSR AT400 is a syndiotactic 1, 2-polybutadiene and thermoplastics elastomer containing at least 90% 1, 2-bonds, which have a melting point derived from its syndiotactic structure. Blending compounds with AT yields improved processability (compound viscosity, green strength, and mill shrinkage), and physical properties (strength and hardness) of the bead and tread.

Rubaloy RA - 7047 is a unique blend of Nitrile Rubber with PVC, specially made to offer very high ozone, weather, oil, and abrasion resistance in the products. It offers good tensile strength and elongation along with extremely low gas permeability. It is suitable to produce molded and extruded products.

Rubaloy RA - 70 is the most popular and widely used grade of fluxed NBR / PVC in the polymer ratio of 70-30. It is a non-staining, oil, Ozone, abrasion, weather and flex resistant polymer using medium Acrylonitrile Butadiene Rubber with Poly Vinyl Chloride Resin.

This product is a polyurethane system. "VP"-products are experimental products. Regarding technical data slight modifications are possible.

This product is a polyurethane system. After use please close the containers carefully. The product can be subject to color variations due to raw materials, but these color variations have no influence on the quality and the properties of the product. Seal porous mold surfaces first (ebalta mold sealer). For optimum mold releasing we recommend a special release agent (like T1-1), which can be applied easily with a brush or be sprayed. Releasing of the mold 2-3 times, evaporate for about 20 min. after each releasing.

JSR AT300 is a syndiotactic 1, 2-polybutadiene and thermoplastics elastomer containing at least 90% 1, 2-bonds, which have a melting point derived from its syndiotactic structure. Blending compounds with AT yields improved processability (compound viscosity, green strength, and mill shrinkage), and physical properties (strength and hardness) of the bead and tread.

Rubaloy RA - 7060 is a non-staining, oil, ozone, abrasion, weather and flex resistant polymer using medium Acrylonitrile Butadiene Rubber and a special grade of Poly Vinyl Chloride Resin.

This product is a polyurethane system. After use please close the containers carefully. The product can be subject to color variations due to raw materials, but these color variations have no influence on the quality and the properties of the product. Seal porous mold surfaces first (ebalta mold sealer). For optimum mold releasing we recommend a special release agent (like T1-1), which can be applied easily with a brush or be sprayed. Releasing of the mold 2-3 times, evaporate for about 20 min. after each releasing.

This product is a polyurethane system. After use please close the containers carefully. The product can be subject to color variations due to raw materials, but these color variations have no influence on the quality and the properties of the product. Seal porous mold surfaces first (ebalta mold sealer). For optimum mold releasing we recommend a special release agent (like T1-1), which can be applied easily with a brush or be sprayed. Releasing of the mold 2-3 times, evaporate for about 20 min. after each releasing.