Products in Off Road & Commercial Vehicle Coatings

FluoroSLIP® 533 is a blend of hydrophilic synthetic wax and PTFE where the synthetic wax shows a uniform melting range peaking at 97°C.

Eagle Chemicals EAGA CRYL-504 is aqueous anionic, OH-functional Styrene / Acrylic emulsion

S-NAUBA 5021 is a concentrated blend of carnauba and synthetic wax showing melting peaks ranging from 84 – 110°C. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

SPP-25 is a low molecular weight polypropylene texturing agent. The SPP Series consists of polypropylene powders in a controlled range of particle sizes. These products are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based inks & coatings.

Sunspheres™ 200 Nm are optically clear, solid fused amorphous microspheres designed for use in a wide variety of coatings, inks, adhesives, powder coatings, and thermoplastics, including UV curable compositions. These sub-micron sized spheres can be used to improve physical and mechanical properties including reduced shrinkage, improved adhesion, impact resistance, and enhanced surface qualities such as hardness, mar and scratch resistance. The average particle size is 200 nanometers and range in size from about 50 nm to 500 nm.

DYTEK® BHMT HP (bis-hexamethylene triamine) is a high purity (>95%) triamine that is used in applications where purity is critical such as phosphonate scavenger and flocculant in oil & gas applications and as a hardener in epoxy coating and adhesive applications.

S-400-Q is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 108 – 146°C. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

The Sunspheres™ 200 Nm ST- 3 are surface treated*, optically clear, solid fused amorphous microspheres designed for optimum dispersion in coatings, inks, adhesives, and thermoplastics, including UV curable compositions. Cured films show enhanced physical and mechanical properties including increased corrosion resistance, reduced shrinkage, improved adhesion, and enhanced surface qualities such as mar and scratch resistance. This product is particularly useful in improving impact resistance. The average particle size is 200 nanometers and range in size from 50 to 500 nm.

Hydrocer 7112 is a stable, aqueous synthetic wax dispersion. Keep the lid tight on the container to avoid separation. If this product has separated, simple mixing with paddle or propeller mixer is all that will be required. The Hydrocer products are wax emulsions, dispersions, or a combination of these.

Catana™ EPOX 2474 is a distilled min. 98% grade of normal-butylglycidylether. Catana™ EPOX 2474 is most efficient viscosity reducing reactive diluent for high viscosity epoxy resins such are applied in adhesives, laminating, tooling, etc.

Sunspacers™ 04.X are finely divided, optically clear, solid fused amorphous silica micronized powders. This product is specially engineered for paints, liquid and powder coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These micronized powders increase corrosion resistance, reduce shrinkage, improve adhesion, and enhance surface qualities including abrasion, mar and scratch resistance. Sunspacers™ 04.X have a median particle size of approximately 3-4 microns, with a particle size range of 0.5 microns to 13 microns.

S-363 is a synthetic wax alloy showing melting peaks ranging from 92 – 141°C. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

MasterTouch 81 Series - Semi gloss is a premium series Semi gloss alkyd enamel designed to provide a very tough, durable, semi gloss sheen finish for a wide variety of interior or exterior substrates including wood and ferrous metal surfaces. Master Touch 81 series Semi gloss is formulated for high hide, excellent sag resistance, flow and leveling, and wet edge retention. This extremely durable product is single component, but can be cross-linked with our 8000 Polyurethane Converter when stringent specs require extra protection, color retention, and corrosion resistance. Master Touch 81 series Semi gloss meets Gov’t. Specs TT-E- 529C and TT-E-509.

High brightness, work-horse calcined kaolin clay, extremely low crystalline silica content.

ADDITOL® VXW 6251 is a clear, slight yellow formulation designed for the paints and coatings industry, with a focus on automotive and transportation applications. This product stands out for being APEO-free, bisphenol A-free, and tin-free, making it suitable for aerospace coatings, automotive OEM coatings, marine coatings, and rail and mass transit coatings. Specifically formulated for compatibility with metal substrates, it serves various transportation sectors, including aerospace and aviation, commercial, marine, and rail and mass transit.

Hydrocer 135 is an aqueous amide wax dispersion.

ADDITOL® P 791, a specialized hardener belonging to the anhydride chemical family, offers advanced solutions for powder coating applications. Proudly VOC-free and TMA-free, this product aligns with strict environmental standards. Its versatility extends to various end uses within the automotive and transportation sectors, including aerospace coatings, automotive OEM coatings, marine coatings, off-road and commercial vehicle coatings, and rail and mass transit coatings.

ADDITOL® VXK 6365 is a whitish 2K (2-component) coating formulated for the paints and coatings industry, focusing on applications within the automotive and transportation sectors. This product is APEO-free and boasts low VOC labeling claims, making it suitable for aerospace coatings, automotive OEM coatings, marine coatings, and rail and mass transit coatings. Specifically designed for compatibility with metal substrates, it serves various transportation segments, including aerospace and aviation, commercial, marine, and rail and mass transit.

SPP-40 is a low molecular weight polypropylene texturing agent.

Enviro-Finish 40A03 is a high performance waterborne acrylic enamel designed for the segment of the OEM Market that requires a VOC compliant coating to replace its conventional alkyd system. 40 Series is designed for Direct-To-Metal (DTM) applications or can be used over our 49 Series primer for extra corrosion protection. Formulated to provide extra early resistance to water spotting and wrinkling which are common problems among water reducible alkyd enamels exposed to moisture too early.

Hydrocer 357 is a stable, non-ionic aqueous spherical synthetic wax dispersion. The Hydrocer products are wax emulsions, dispersions, or a combination of these.

The SPP Series consists of polypropylene powders in a controlled range of particle sizes. These products are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based inks & coatings.

Catana™ EPOX 2360 is a clear viscous liquid consisting of polypropyleneglycol diglycidylether. It has a higher epoxy group content than the Catana™ EPOX 2361. Catana™ EPOX 2360 main use is as reactive diluent or flexibilizing resin for high viscosity epoxy resins applied in coatings, casting, adhesives, sealants, etc.

OMNISTAB® LS 292 is a multi-purpose liquid basic HALS for coatings, printing and packaging, adhesives and sealants.

GP® CL-7004 phenolic resin from Georgia-Pacific Chemicals is a thermoplastic novolac. It is used as a crosslinking resin for epoxy and polyester resins. Its low phenol content, convenient softening point, and melt viscosity are conducive for use in powder coatings.

FluoroSLIP® 893-A is a stir-in powder blend of spherical micronized polyethylene (PE) and polytetrafluoroethylene (PTFE).

ADDITOL® P 965, functioning as a crosslinking agent and belonging to the urethane chemical family, is a vital component in powder coating formulations. This product, claiming to be VOC-free and TMA-free, aligns with stringent environmental standards. Targeted for applications in the automotive and transportation sectors, including aerospace coatings, automotive OEM coatings, and rail and mass transit coatings, ADDITOL® P 965 contributes to enhanced crosslinking processes, ensuring superior results and reliability in various coating applications within these industries.

HydroCER 7410 is a 45% aqueous dispersion of medium molecular weight polyethylene wax. The HydroCER products are wax emulsions, dispersions, or a combination of these.

S-381-N1 is a micronized synthetic and natural wax alloy that has a uniform melting range peaking at 91°C. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

SST®-1MG is a friable grade of PTFE powder which can be reduced to an average particle size of 1 – 2 microns.

Life-Kote 72 Series “Bullet Proof” Urethane is a two component, high solids, VOC compliant, urethane system designed to produce a highly weatherable, durable, and flexible finish for the high performance coating markets. 72 Series is the ultimate coating in color and gloss retention. This tough, abrasion resistant finish performs its best in the areas of gloss and color retention by outlasting conventional alkyds in severe sun exposure by 3 to 1. Must be catalyzed with 8002 Urethane Catalyst. Mix ratio is 2 1⁄2 parts Base to 1 part catalyst, by volume. 8002 catalyst is included with product. Mixed material will have a 2 hour pot life.

S-395-N2 is a synthetic wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

Life-Kote 72 Series 1:1 Mix Ratio is a two-component, high solids, VOC compliant, hybrid acrylic urethane system designed to produce a highly weatherable, durable, washable, and flexible finish for the high performance coatings market. 72 Series is the ultimate coating in color and gloss retention. This tough, abrasion resistant finish performs its best in the areas of gloss and color retention by outlasting conventional coatings in severe sun exposure by 3 to 1. 72 Series must be catalyzed with H8015 Urethane Catalyst. Mix ratio is 1 part base to 1 part catalyst, by volume. H8015 catalyst is included with product. Mixed material will have a 2-4 hour pot life.

DYTEK® BHMT (bis-hexamethylene triamine) is a long chain triamine that is used as a binder in asphalt, as a phosphonate scavenger and flocculant in oil & gas applications, and as a hardener in epoxy coating and adhesive applications.

OMNISTAB® LS 123 is a Liquid HALS stabilizer based on an aminoether functionality. Its low basicity prevents possible interactions with acidic paint ingredients such as catalysts. Improves the weathering performance.

Catana™ CAA 2340 is a solid consisting of dodecyltrimethylammonium bromide. Catana™ CAA 2340 can be used as catalyst for polymerization of e.g. Coatings and powder coatings.