Products in Marine

Crystic® Polyester Resin 491PA is a pre-accelerated, thixotropic, isophthalic polyester resin with good water and chemical resistance properties. It is versatile and suitable for performance boat hulls destined for use in warm or tropical areas. This product is also suitable for the manufacture of chemical plants, tanks, pipes, and chemical containers. It has a 12-minute gel time.

Crestabond® M1-90HV/2 is a toughened, two component 10:1 acrylic adhesive designed for bonding composites, thermoplastics and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations. Demonstrating excellent impact, peel, shear, compressive strength and fatigue resistance properties across all bonded parts.

Crestabond® M7-05 Structural Adhesive is a toughened, two-component 1:1 MMA structural adhesive that is designed for bonding a wide range of substrates, including metals, plastics, and composite materials in industrial applications. This adhesive demonstrates excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts, especially with galvanized metals. Crestabond® is a primer-less MMA adhesive requiring minimal surface preparation, which helps reduce overall production costs and increase productivity. This product has a working time of 4 to 7 minutes.

Crestabond® M7-04 Structural Adhesive is a toughened, two component 1:1 acrylic adhesive designed for bonding composites, thermoplastics and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations. The product demonstrates excellent impact, peel, shear, compressive strength and fatigue resistance properties across all bonded parts.

Crestabond® M1-60HV/2 is a toughened, two-component 10:1 acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations. Demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts.

Crestakyd® 44-5027 is a short oil alkyd with phenolic resin and rosin modification. It exhibits rapid initial and through drying and high resistance to water, fuels and oil. This modified air drying alkyd has good flexibility and adhesion to metallic substrates.

espol™ 30.00 is a non-accelerated isophthalic polyester resin that rapidly wets out reinforcements. It has a medium viscosity and reactivity and uses superior glycols compared to general-purpose resins, giving it good mechanical and chemical resistance. It is suitable for the fabrication of chemical tanks, industrial applications, and marine applications.

Crystic® Polyester Resin 701PAX is a pre-accelerated isophthalic polyester resin with low viscosity and controlled exotherm characteristics. It is designed for use in vacuum infusion processes. This product has Lloyd's approval and is suitable for use in marine, wind energy, building and construction, and transportation.

Crystic® Polyester Resin 397PA is a pre-accelerated isophthalic/neopentyl glycol polyester resin with a high heat deflection temperature and good water and chemical resistance. It is recommended for the fabrication of high-performance laminates for critical applications in aggressive environments. This product is suitable for contact molding and filament winding processes.

Crystic® Polyester Resin 489 is a thixotropic isophthalic polyester resin. When used with Crystic Gelcoat 65PA, they produce a matched performance system for molding boat hulls with outstanding durability and superior blister resistance. The outstanding wetting characteristics of Crystic 489 provide rapid impregnation with freedom from drainage.

Crestomer® 1150PA is a two-part, pre-accelerated, highly thixotropic structural adhesive that is based on unsaturated urethane-acrylate in styrene monomer. It is used in many structural composite applications and has excellent adhesion to FRP laminates, core materials, wood, and some metals. This product can be used for bonding diesel tanks, contour joints in FRP components, building up damaged areas, and bonding "green" FRP.

Crystic® Brush Topcoat 506PA White is a pre-accelerated Topcoat with excellent water and weather resistance, designed for use in the marine and building industries. It is based on a high quality isophthalic-NPG polyester resin and has been formulated for application by roller or brush. The product is pigmented using a highly UV resistant grade of titanium dioxide.

Crestomer® Advantage 30 Structural Adhesive is a white, high-performance structural adhesive offering the same advantages as Crestomer® 1151A but in a more convenient, pre-packed 380ml co-axial cartridge. It is particularly suitable for marine applications and has Lloyd's approval. The opaque white color of the adhesive blends well aesthetically with cosmetically sensitive applications.

Crystic® Low Viscosity Gelcoat 64PA is a high performance isophthalic gelcoat, pre-accelerated and formulated for brush or roller application. It is recommended for use in all markets including marine, land transport and building applications and is also suitable for general molding requirements. Crystic® Gelcoat 64PA is approved by Lloyd'™s Register of Shipping.

Crystic® Brush Topcoat 507PA is a pre-accelerated Topcoat with excellent water and weather resistance, designed for use in the marine and building industries. It is based on a high quality isophthalic-NPG polyester resin and has been formulated for application by brush. The product is pigmented using a highly UV resistant grade of titanium dioxide.

Crystic® Polyester Resin 123PA is a medium-thixotropic, tropicalized, pre-accelerated waxed unsaturated polyester resin. This resin is specially formulated to provide rapid wetting and impregnation of the reinforcement. It is ideally suited for the building of boats, water tanks, bathtubs, shower trays, and other products where water resistance is an important factor.

Crystic® Isophthalic Brush Gelcoat 65PA is a general purpose Isophthalic brush gelcoat used successfully globally across all market sectors for years. Molders choose this gelcoat over competitive products because of its exceptional handling properties in production, good flexibility, good gloss and ease of repair.

Crystic® Laminating Resin 406PA is a pre-accelerated, thixotropic, orthophthalic polyester resin. This laminating resin has rapid wet out and low exotherm, making it ideal for multi-layer laminates in spray or hand-lay applications. It has a gel time of 18 minutes and Lloyd's approval. This product is suitable for use in marine, transportation, building and construction, and industrial applications.

espol™ 41.00 is a non-accelerated isophthalic neopentyl glycol (ISO-NPG) polyester resin suitable for aggressive marine applications. The resin has been approved by the IRS (Indian Registrar of Shipping) for usage on ships and other marine transport vehicles. It has been specifically formulated for resistance to seawater, offering superior osmotic stability alongside excellent mechanical properties.

Crestafix® B39 Adhesive is a high strength pumpable polyester adhesive formulated for production environment in boatbuilding and general fiberglass fabrication. It was formulated to provide reliable structural bonds in both thin and thick bondlines (1/8” to 1”, 3 - 25mm). The product has low shrinkage, low exotherm and no volume loss during pumping.

Crystic® Orthophthalic Spray Topcoat 408PA White is a pre-accelerated flowcoat with excellent scuff resistance, designed for use in general purpose GRP moldings. It is based on a high quality orthophthalic unsaturated polyester resin and is suitable for all general molding requirements. The product is pigmented using a highly UV resistant grade of titanium dioxide.

Crystic® Vinylester Resin VE671 is an epoxy Bisphenol A based standard vinyl ester resin. It has outstanding chemical resistance to a wide range of substances, (acids, alkalies, oxidising agents) at room and elevated temperatures. The product is suitable for fabrication of fiber reinforced composites by all conventional techniques (contact molding, filament winding and injection molding) and for use in many chemical processing industry applications (storage tanks, vessels, ducts).

Crystic® Isophthalic Spray Gelcoat GT-900 is a high performance isophthalic gelcoat, filled, pre-accelerated and formulated for spray application. It has been developed to have excellent intrinsic water and weather resistance. The viscosity profile ensures even coverage with minimal drainage and low film porosity. This product is recommended for use in the marine, building and transport industries. It is also suitable for general molding requirements.

Crystic® Polyester Resin 272 is an isophthalic polyester resin. It is recommended for use in high-performance applications using filament winding, pultrusion, and centrifugal or contact molding processes. The fully cured laminates have high mechanical strength and excellent strength retention in wet environments at temperatures up to 60ºC.

Crystic® Brush Gelcoat 69PA is a pre-accelerated Iso-NPG gelcoat formulated for brush application. It has been developed to have exceptional water and chemical resistance and is recommended for use in sanitaryware and chemical containment applications. Crystic® Gelcoat 69PA is approved by Lloyd'™s Register of Shipping.

Crystic® Isophthalic Brush Topcoat 65PAX is a general purpose, brush isophthalic topcoat which cures tack free when applied to the reverse side of a laminate. It can be used in applications where the back surface of a polyester laminate needs to be given a gelcoat finish to improve aesthetics.

Crestomer® 1151A Structural Adhesive has Lloyd's approval. This high-performance structural adhesive and filleting compound is specially designed for bulk applications with either a 10:1 catalyst ratio or a 50:1 catalyst ratio. It exhibits non-sagging and fast-gelling properties, enabling the user to work with bonded parts in 2 hours. Compared to other competitive structural adhesives, this product has noticeably less odor and can be used to bond a wide range of substrates with minimal surface preparation.

Crystic® Vinyl Ester Resin VE 679PA is a pre-accelerated, thixotropic, DCPD modified, vinyl ester laminating and tooling resin with excellent surface finish for marine skin coat as well as for tooling applications. It has a gel time of 23 minutes.

Crystic® Spray Gelcoat LS 30PA is a superior weathering Iso-NPG gelcoat. It is pre-accelerated and formulated for spray application. Crystic® Gelcoat LS 30PA has been developed to have excellent intrinsic water and weather resistance. The viscosity profile ensures even coverage with minimal drainage and low film porosity.

Crystic® Vinyl Ester Resin VE679-03PA is a pre-accelerated, DCPD modified, vinyl ester resin developed for use as a infusion resin with a wide range of gel times with various catalysts. It has excellent blister resistance and significantly reduces the occurrence of print through, to produce durable moldings with an enhanced surface finish.

Crestamould® VE 690PA is a pre-accelerated, thixotropic, modified vinyl ester resin. This product is developed for use as a skin coat in tooling and marine applications. It has excellent blister resistance, and it significantly reduces the occurrence of print-through to produce durable moldings with an enhanced surface finish.

Crestabond® M1-04 Structural Adhesive is a toughened, two-component 10:1 MMA structural adhesive that is designed for bonding a wide range of substrates, including metals, plastics, and composite materials in industrial applications. This adhesive demonstrates excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. Crestabond® is a primer-less MMA adhesive requiring minimal surface preparation, which helps reduce overall production costs and increase productivity. This product has a working time of 3 to 5 minutes.

Crestakyd® 41-5009 is a styrene-modified alkyd based upon a blend of mixed non-yellowing oils and supplied as a solution in xylene. It is a very versatile resin that gives paints with high gloss and good resistance properties. It is also used in the marine industry for quick drying coatings.

Crystic® Polyester Resin 124PA is a medium-thixotropic, tropicalized, pre-accelerated, waxed unsaturated polyester resin. It is designed for rapid wetting and impregnation of reinforcements, making it ideal for building boats, water tanks, bath tubs, shower trays, and other products that require water resistance. The unwaxed version of this resin is also available.

Crystic® Polyester Resin 491PAT is a versatile, pre-accelerated, unsaturated polyester resin with good water and chemical resistance properties. It was developed for use in a wide range of critical applications that require toughness combined with water and chemical resistance. This product is thixotropic and can be applied with either brush or spray equipment. It may also be used in the pultrusion process for the production of profile sections. This product is suitable for the fabrication of high-performance boat hulls destined for use in warm and tropical waters.

Crestamould® VE 679PA is a pre-accelerated, thixotropic, DCPD-modified vinyl ester resin. This product has been developed for use as a skin coat in marine and tooling applications. It has excellent blister resistance, reduced print through, a 23-minute gel time, and Lloyd's approval.