Products in Shingles & Tiles

Prismagum-G Orange A012 belongs to Prisma Colors' standard single pigment rubber masterbatch product range which are granulated into a small chip for easy dosing and quality dispersion.The product is also available in slab form and can be dispersed in different polymer types.Please contact us for more information

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Prismagum-G Black C644 belongs to Prisma Colors' standard single pigment rubber masterbatch product range which are granulated into a small chip for easy dosing and quality dispersion.The product is also available in slab form and can be dispersed in different polymer types.Please contact us for more information

Mica Is A Generic Term Applicable To The Group Of Complex Aluminosilicate Minerals That Occur Naturally In Plate Or Sheet-Like Form.

Prismagum-G Red J636 belongs to Prisma Colors' standard single pigment rubber masterbatch product range which are granulated into a small chip for easy dosing and quality dispersion.The product is also available in slab form and can be dispersed in different polymer types.Please contact us for more information

Calumet Roofing Flux is used in road construction and roofing application as well as a wide range of specialty products. Calumet produces asphalt at three refineries, Princeton, LA, Shreveport, LA and Great Falls, MT. Our Princeton refinery produces materials used in the roofing industry, primarily coating asphalt used in the manufacture of shingles. Our predictable crude slate means our asphalt has consistent properties.

Prismagum-G Green A680 belongs to Prisma Colors' standard single pigment rubber masterbatch product range which are granulated into a small chip for easy dosing and quality dispersion.The product is also available in slab form and can be dispersed in different polymer types.Please contact us for more information

Tecomid® NA40 NL E by Eurotec Engineering Plastics is comprised of Polyamide 66. It is commonly used

DISTITRON® 120 V2,5 - Unsaturated polyester resin in styrene,DCPD. It is used to produce profiles through pultrusion method.

DISTITRON® 100 SW - Unsaturated polyester resin in styrene,DCPD. It is used to produce furnitures and sanitary through casting,mix with fillers and/or additives method.

NORSODYNE® H 13212 TAE - Unsaturated polyester resin in styrene,Orthophthalic. It is used as general purpose in hand lay up and spray up method.

Stypol® APVU4000 - polyvinyl acetate low profile additive. Class A surface and dimensional stability. Acid modified for thickening in compounding applications. Main applications areas are automotive, building and construction, home and domestic applications, industrial sector etc.

LURANYL® HT 220 G2 is a PPE/PA, injection molding grade, 10% glass fiber reinforced, high heat resistance.

Polydyne® 5005 is used for general purpose and gel coat formulation. Main applications areas are composites, textile industry etc.

Polynt Group 737-6755 is general purpose RTM resin with rapid cure rate for increased mold turnover; good profile. Main applications areas are aeolian, agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

2300® Construction Tripolymer Sealant GC66855 is a single component, high-performance elastomeric sealant for use in a wide variety of roofing, trim, architectural, metal, manufacturing, underdeck system, solar roof system, and general construction applications.

Sudaglass Fiber Technology TBK100 is a tough fireproof fabrics, these fabrics are manufactured to varying thickness, weight, weave pattern and weaving technique according to end-use requirements.

Polynt Group 752-4420 is general purpose RTM resin with rapid cure rate for increased mold turn over; good profile; UL 94 V-O and 5V listed product; class I flame-retardant without additional additives; meets mil-r-7575c requirements for grade a applications. Main applications areas are aeronautical, agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports, railway sector etc.

DISTITRON® I 100 SV1,5 - Unsaturated polyester resin in styrene,DCPD. It is used to produce reinforced plastics,general purpose through vacuum infusion method.

ENYDYNE® H 66126 TAE - Unsaturated polyester resin in styrene,DCPD. It is used to produce pipes and tanks through hand lay up and spray up method.

Stypol® 040-8006 - unsaturated polyester closed molding resins for RTM. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

DISTITRON® 3501 CV2,5 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce statues through casting method.

Polynt Group BMC 750 Granito is a bulk molding compound based on an unsaturated polyester resin, quartz filler and reinforced with glass fibers. This BMC has been developed for sinks application to replicate stone effect. BMC 750 Granito joint good surface durability and stain resistance. BMC 750 Granito is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

DISTITRON® VE 370 SC - Bisphenol-A Epoxy Resin based vinyl ester in styrene. It is used to produce marine,boats through vacuum infusion method.

ADDAPT BioWet 150R is a solvent free, ready biodegradable wetting agent which improves the Wet-Edge (open time) and Water Retention. It is a Polyhydroxy - Amide. The product is EINECS registered.

ENYDYNE® H 61104 TAPF - Unsaturated polyester resin in styrene,DCPD. It is used to produce furnitures and sanitary through hand lay up and spray up method.

Betol 47 T is an inorganic binder based on especially modified sodium silicate without any volatile organic additives.

EPOVIA RF-2000SE is Brominated vinyl ester resin for hand lay up-filament winding and it is generally used in Building and Construction,Chemical Industry,Industrial sector,Railway Sector applicatons

NORSODYNE® Y 90286 - Unsaturated polyester resin in styrene,Tetrahydrophthalic. It is used to produce mastics,putties.

Norsodyne® PT-204T - isophthalic resin for hot curing, heat resistance. Main applications areas are building and construction etc.

Iron oxide red CI PR.101 145 is an important inorganic colorant, iron oxide red is characterized high opacity, strong tinting strength, easy dispersibility, excellent light fastness and perfect weather resistance. It is extensively used in concrete, roofing tile, paver, stucco, masonary, paint, coating. rubber, plastic, paper and leather industries etc.

ARDEX X 3™ Tile and Stone Mortar is a Portland cement-based, polymer-modified mortar with good bond strength and sag resistance and a 3-hour pot life. ARDEX X 3 mixes to a creamy, easy to apply thin set mortar that is water and weather resistant. ARDEX X 3 can be used to install quarry, ceramic and most natural stone tiles on many common interior or exterior surfaces and also can be used for setting porcelain tile over interior, absorbent concrete and other cementitious surfaces. ARDEX X 3 is recommended for the installation of most tile sizes, including mosaics, and is suitable for use over concrete floors with in-floor heating systems.

TouchStone™ T-2000 Epoxy is a two component, water cleanable, 100% solid epoxy adhesive compound developed for setting of ceramic tile and stone on horizontal or vertical surfaces.

Iron oxide Black CI PB.11 780 is an important inorganic colorant, iron oxide yellow is characterized high opacity, strong tinting strength, easy dispersibility, excellent light fastness and perfect weather resistance. It is extensively used in concrete, roofing tile, paver, stucco, masonary, paint, coating, rubber, plastic, paper and leather industries etc.

Orgal® P 036V is Acrylic Copolymer.

Norsodyne® CMC15100W - orthophthalic resin for marble and onyx, promoted and waxed, low viscosity. Main applications areas are building and construction, industrial sector etc.