Products in Plasters & Renders

VARIPHOB® AC 1120 is an aqueous emulsion of a cross-linkable polysiloxane used as a water-repelling agent for aqueous coating systems. This product has an improved beading effect and resistance to water. Belonging to the VARIPHOB® product portfolio, this product guarantees long-lasting and environment-friendly protection.

VARIPHOB® AC 1104 is an aqueous emulsion of a polysiloxane used as a water-repelling agent for aqueous coating systems. This product has an improved beading effect and resistance to water. Belonging to the VARIPHOB® product portfolio, this product guarantees long-lasting and environment-friendly protection.

AGOCEL® AC 5600 is a heteropolysaccharide used as a stabilizer and rheological additive for silicate-based painting systems. Belonging to the AGOCEL® product portfolio, this product is not only added to adjust the viscosity to meet processing requirements and specifications but also to influence essential properties such as storage stability and good anti-settling behavior.

VARIPHOB® AC 5002 is a silicone-based hydrophobic powder used as a water-repelling agent for the protection of mineral-based construction materials. This product is used for cement-based systems, such as bathrooms, swimming pools, showers, saunas, wellness areas.

VARIPHOB® AC 5002 is particularly well-suited for construction materials such as:

• Mineral mortars / Grouts
• Plasters
• Renders
• Concrete
• Joint fillers
• Sealing mortars
• Levelling compounds
• Skim Coats
• Stucco

It increases durability by reducing water absorption, and increases surface hydrophobicity of the materials used. This product also provides full breathability so that water vapor can easily evaporate.

VARIPHOB® AC 2552 is an aqueous emulsion of reactive, modified polysiloxane used as a water-repelling agent for aqueous coating systems. This product has improved water resistance and vapor permeability. It belongs to the VARIPHOB® product portfolio and guarantees long-lasting and environmentally friendly protection.

VARIPHOB® AC 2552 is:

• BIT free
• CIT free
• MIT free
• Flourine-free
• Free from silicone cycles (D4/D5/D6)

AGOCEL® AC 2530 is a water-soluble polyacrylamide polymer used for controlling the required amount of water and rheology in mineral binder systems. Belonging to the AGOCEL® product portfolio, this product is not only added to adjust the viscosity to meet processing requirements and specifications but also to influence essential properties such as storage stability and good anti-settling behavior.

VARIPHOB® AC 3030 is an aqueous emulsion of reactive, modified polysiloxane used as a water-repelling agent for aqueous coating systems. This product has improved water resistance and vapor permeability. It belongs to the VARIPHOB® product portfolio and guarantees long-lasting and environmentally friendly protection.

VARIPHOB® AC 3030 is:

• Flourine-free
• Stable to silicate
• Suitable for let-down stage
• Dilutable

AGOCEL® AC 1115 is a polygalactomannan ether used as a hydrocolloid for water-based paints and synthetic resin plasters. Belonging to the AGOCEL® product portfolio, this product is not only added to adjust the viscosity to meet processing requirements and specifications but also to influence essential properties such as storage stability and good anti-settling behavior.

SILRES® BS 1340 is a nonionic, solvent-free, waterborne emulsion of a reactive polysiloxane. It is specifically used in the formulation of water-resistant coatings. SILRES® BS 1340 can be directly incorporated, without dilution, into waterborne masonry paints and plasters either during or after their production.

Dragonpovol Polyvinyl Alcohol (24-88 Grade) is a typical band of the PVA family, which is a good substitute for BP-24, PVA-224E, and GH-20/22/23, some famous bands used in the market. It can be used as glue & adhesive to disperse and bind construction materials such as concrete, mortar, plaster, etc. Due to the active -OH and -COOR groups in the chemical structure, it can reduce the surface tension of water solution to a large extent. It can be used as a primary dispersant in PVC suspension production, which in return boosts the bulk density of the PVC product.

POLYRON® N NEW is a white, hygroscopic agglomerate dispersing agent that is ideal for emulsion paints, plasters, and adhesives. Its high dispersing effectiveness quickly achieves optimal particle size. It reduces water hardness, deflocculates pigments and fillers in aqueous suspensions, and can help achieve high solid contents in emulsion paints with low viscosity.

LOPON® DA 400 is a universal dispersing agent formulated with middle-molecular-weight sodium polyacrylate. It delivers outstanding deflocculation results when utilized in highly filled systems containing inorganic pigments such as titanium dioxide, calcium carbonate, and mica. LOPON® DA 400 exhibits remarkable alkaline stability and demonstrates strong compatibility with polyphosphates like POLYRON® N. This combination ensures excellent storage stability for the product.

POLYRON® 322 NEW is a white, hygroscopic agglomerate dispersing agent designed for use in emulsion paints, plasters, and adhesives. Its dispersing action ensures that an optimal particle size is rapidly achieved, making it best suited as a dispersing agent for waterborne paints, especially emulsion paints. POLYRON® 322 NEW slows down sedimentation, reduces water hardness, and has a good binding capacity with respect to calcium and heavy metal ions.

LOPON® ST is a highly effective stabilizer for emulsion silicate paints that prevents the formation of a polymeric network by the silicate groups in water glass during storage. The viscosity of the paint quickly levels off and remains stable for an extended period of time.

LOPON® DA 200 is a universal dispersing agent formulated with low-molecular-weight sodium polyacrylate. It provides exceptional deflocculation results in systems with high filler content, including inorganic pigments like titanium dioxide, calcium carbonate, and mica. LOPON® DA 200 exhibits excellent alkaline stability and demonstrates strong compatibility with polyphosphates such as POLYRON® N. This combination ensures remarkable storage stability for the product.

TARGON® GA 1 is a setting retarder formulated with sodium phosphate, hydroxypolycarboxylic acid, and an anticaking agent. This white powder can be blended with TYLOSE® MC variants and other processing auxiliaries, such as surfactants. Serving as a setting retarder, it finds application in gypsum plaster that is devoid or has minimized calcium hydroxide content (both manual and mechanical applications), as well as in plaster adhesives.

POLYRON® 322 is a white powder dispersing agent designed for use in emulsion paints, plasters, and adhesives. When applied in combination with polyacrylates such as LOPON® DA 200, POLYRON® 322 improves the storage stability of the product. Its dispersing action also ensures an optimal particle size is rapidly achieved, enhancing the final product's quality.

POLYRON® N is a white powder dispersing agent for emulsion paints, plasters, and adhesives. Its high dispersing effectivity quickly achieves an optimal particle size. It is ideal for use as a dispersing agent for emulsion paints and plasters, and it reduces water hardness and deflocculates pigments and fillers in aqueous suspensions. It can achieve high solid contents in emulsion paints with low viscosity.

LOPON® DA 201 is a highly effective dispersing agent formulated with low-molecular-weight potassium polyacrylate. It is specifically designed for use in silicate emulsion paints. By utilizing potassium as the cation, it prevents the introduction of additional ions into the system, thus suppressing efflorescence during the drying process that can occur through the formation of sodium carbonate. LOPON® DA 201 achieves exceptional deflocculation results when incorporated into highly filled systems containing inorganic pigments like titanium dioxide, calcium carbonate, and mica. The product demonstrates excellent alkaline stability and exhibits strong compatibility with polyphosphates such as POLYRON® N, resulting in impressive storage stability.

TARGON® G 2 is a distinct product grounded in condensed phosphates, coupled with an anticaking agent characterized by hydrophobic attributes. It appears as a white, finely textured powder with commendable flowability. Serving as a secondary retarder element for pre-mixed gypsum plaster, this product prevents abrupt caking, establishes consistent setting, extends the time allocated for treatment between cutting and felting, and enhances the qualities of the final treatment.

LOPON® DA 401 is a highly effective dispersing agent formulated with middle-molecular-weight potassium polyacrylate. It is specifically designed for use in silicate emulsion paints. By utilizing potassium as the cation, it prevents the introduction of additional ions into the system, thus suppressing efflorescence during the drying process that can occur through the formation of sodium carbonate. LOPON® DA 401 achieves excellent deflocculation results when incorporated into highly filled systems containing inorganic pigments such as titanium dioxide, calcium carbonate, and mica. The product possesses high alkaline stability and exhibits strong compatibility with polyphosphates like POLYRON® N, offering very good storage stability.

TARGON® FM is a processing aid employed as an auxiliary agent for cementitious leveling compounds. It constitutes a blend of sodium phosphate, hydroxypolycarboxylic acid, and a wetting agent. This product is particularly well-suited for ternary systems involving Portland cement, gypsum, and refractory cement.

TARGON® G 5 is a secondary retarder derived from condensed phosphates. It presents as a white, fine, non-hygroscopic powder, serving as a secondary retarder element for pre-mixed gypsum plaster. This product exerts a dispersing influence on the plaster's solid components. It ensures consistent setting and extends the interval for manipulation between cutting and felting stages. TARGON® G 5 further enhances the final treatment characteristics.

LOPON® 890 is a viscous liquid dispersing agent for emulsion paints, varnishes, plasters, and adhesives. It offers excellent dispersing properties, high solid content availability, and good storage stability for the paints. It is also stable with glycol and offers high gloss, making it an ideal choice for a wide range of applications.

TARGON® G3 functions as a secondary retarder, operating in conjunction with citric or tartaric acid based on the formulation's pH. For formulations exhibiting an alkaline pH, G3 collaborates with tartaric acid. In formulations with a neutral pH, G3 partners with citric acid. TARGON® G3 contributes to the attainment of consistent setting, an extended working duration, and enhanced qualities during the finishing treatment phase.

DeCAL 2097 45% is an anionic superplasticiser based on polycarboxylate technology, known for its extremely high efficiency as a high range water reducer. Its key function makes it suitable for various applications, such as mortars, concretes, self-levelling systems, adhesives, and grouts. With its high deflocculation effect, DeCAL 2097 can maintain the dispersed state for longer periods compared to conventional plasticisers.

DeCAL 2097 is an extremely high efficiency anionic superplasticiser based on polycarboxylate technology. DeCAL 2097 has applications in mortars, concretes, self-levelling systems, adhesives and grouts. DeCAL 2097 has a very high deflocculation effect which allows it to maintain the dispersed state for longer periods as compared to conventional plasticisers.

DeCAL 2099 is an anionic superplasticizer that has been modified with polyacrylate to achieve maximum efficiency. It is highly suitable for use in mortars, concretes, self-leveling systems, adhesives, and grouts. Compared to conventional plasticizers, DeCAL 2099 has a significantly higher deflocculation effect, which allows it to maintain the dispersed state for longer periods.

DeCAL 2098 is an anionic superplasticizer that has been modified with polyacrylate to achieve maximum efficiency. It is highly suitable for use in mortars, concretes, self-leveling systems, adhesives, and grouts. Compared to conventional plasticizers, DeCAL 2098 has a significantly higher deflocculation effect, which allows it to maintain the dispersed state for longer periods.

DeCAL 1006 is a carboxylated acrylic copolymer emulsion suitable for waterborne systems. It is highly effective in producing stable viscosity response between pH 6.5 to 10. DeCAL 1006 is recommended for use in textured coatings, construction adhesives, paints, plasters, and wood stains. It is easy to handle and can be incorporated at most manufacturing steps.

DeCAL 1005 is a hydrophobically modified synthetic alkali-swellable, solvent-free, and liquid thickener for waterborne systems. It is highly effective in increasing low shear viscosities as well as yield values. As a result, levels of use can be significantly reduced when replacing the usual low shear effective thickeners with DeCAL 1005.

Vertal® 92 is an off-white, extremely platy talc. This product is primarily used as a functional mineral pigment in auto body compounds, caulks, putties, and sealants. Vertal® 92 can be used as a cost-effective reinforcing agent or a dusting/parting agent.

Vertal® 97 is an off-white, extremely platy talc. This product is primarily used as a functional mineral pigment in auto body compounds, caulks, putties, and sealants. Vertal® 97 can be used as a cost-effective reinforcing agent or a dusting/parting agent.

Cimsil A35 is a powdered additive that modifies the rheology of mortar, gypsum-plaster, and concrete, improving their properties in both the fresh and hardened states. This thixotropic additive was specifically developed to act as an anti-sagging and anti-slipping agent, improving workability and the visual finish of the systems into which it is incorporated.

DeCAL 2094 is an extremely high-efficiency anionic superplasticizer based on polycarboxylate technology. It is a high-range water reducer used in mortars, concretes, self-leveling systems, adhesives, and grouts. DeCAL 2094 has a very high deflocculation effect, which allows it to maintain the dispersed state for longer periods compared to conventional plasticizers.

DeCAL 9317 can be used as a thickener, viscosity modifier and binder in medium solids applications. It exhibits excellent handling characteristics, dissolving rapidly in water to produce high viscosity solutions. DeCAL 9317 can be used to stabilize and thicken waterborne solutions and dispersions of all kinds of particulate matter. It can be used as an extender with bentonite thickeners in drilling fluids used in the oil industry.