Products in Pools & Landscaping

Altera Polymers EL-91106 Metal Deactivation Masterbatch is a proprietary formulation that prevents premature aging and degradation of TPE and TPV molded parts in applications that are subjected to a wet environment.

Lavecoat IO is based on IsoPhtalic resin, provide very protection and good mechanical performance in external applications with exposure to water and sunlight.

Arabian Chemical Industries ISOBOND is a liquid latex admixture based on styrene butadiene rubber that is designed as an integral adhesivefor cementitious system. Mortars and concrete prepared from ISOBOND has excellent adhesion properties, chemical resistant, high strength, and waterproof. It has excellent resistance to hydrolysis (unlike PVA-based bonding system) and will perform very well under humid conditions and other applications subject to continuous and/ or alternate wettingand drying.

Marvel Industrial ProtecT2 is a solvent-based clear topcoat that bonds well on top of our Marvel Hybrid & 100% Polyureas to provide protection against harsh environments. Demonstrating excellent abrasion, scratch, and UV resistance, our Marvel ProtecT2 is the perfect compliment for added protection.

Abdullah Al Barrak Plastic Products Polycarbonate Diamond Sheet 2100 x 3000 has an attractive diamond embossed pattern. The sheets are stronger and flexible, providing superior spanning and load-bearing capabilities. Polycarbonate Diamond sheets can also withstand extremes of temperature more readily than other material and with Long life UV protection, they are also more resistant to the long-term effects of weathering. Polycarbonate Diamond Sheets has several characters with high impact resistance, lightweight and can be easily cold bend processed and hot molding can be done. Hence, it can be widely used in construction and decorations. We present to our clients superior quality sheets, manufactured by the well qualified and experienced engineers of by using high-grade raw material and components at our manufacturing unit.

Coremat® XM 3 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

Abdullah Al Barrak Plastic Products Polycarbonate Textured Sheet 2100 x 3000 has a texture or pattern which is embossed on its surfaces. By the texture diffuses the natural light, which streams in and ensures uniform dispersion of light over a large scale area that can prevent glare. It is more used mainly in the partition with beautiful decoration effects. We present to our clients superior quality sheets, manufactured by the well qualified and experienced engineers of by using high-grade raw material and components at our manufacturing unit.

SIMONA® PE 100 black 10024801 Line range of pipes and fittings with FM certification offers a superior standard of safety and quality for use in subterranean fire extinguishing systems. What is more, SIMONA® is the first plastics manufacturer worldwide to supply "FM APPROVED" pipes and fittings in sizes up to d 630 mm. It has High heat stability, UV-stabilized, creep strength at 50 years, 20°C, medium water = 10 Mpa.

Alabama Pigments Company Athens Clay Class I is a color hardener which are a pigmented cementitious powder that can be broadcast or dusted onto the surface of freshly placed concrete, to create a dense, abrasion-resistant surface that is permanently colored. Color hardeners can be troweled, broom finished or textured and stamped to create authentic looking stone or patterned textures. The use of color hardeners make it possible to achieve any number of bright or light colors, or any combination of them on gray concrete.

Classic Quick Seal Wet Look is a clear, single component sealer that is designed to be used over all Classic Stains, polymer modified cement toppings, waterborne colorants, concrete, masonry, pavers, natural flagstone, and brick. Quick Seal is a waterborne acrylic with low VOC and high solids. May be used for interior or exterior applications in a wide range of climates.

Prime ABS Weather-X 500 is an ABS substrate with a co extruded cap of an advanced Amorphous Terpolymer of Acrylic Styrene Acrylonitrile. It offers exceptional durability in weather related environments without painting or other types of UV protection. It can retain its color stability under long term exposure to the sun’s rays. It offers good esthetics, color options, good chemical resistance and high heat performance.

E Glass fabrics 2120 is a balanced plain weave fabric.

Sinmast 501 is a 100% solids, flexibilized two-part epoxy joint filler specifically formulated to meet the punishing demands of today’s industrial floors. Sinmast 501 is used to fill and repair joints and cracks subjected to hard wheeled traffic and will provide for a flexible and durable surface. It is flexible, resilient and will help protect floor cracks, saw-cut and control joints from cracking or spalling of the joint edges. Sinmast 501 can also be mixed with sand and applied as a coating for a resilient non-skid surface.

Admix C-1000 RED is added to the concrete mix at the time of batching. Admix C-1000 RED consists of Portland cement, very fine silica sand, a red oxide pigment and various active, proprietary chemicals. These active chemicals react with the moisture in fresh concrete and with the by-products of cement hydration to cause a catalytic reaction which generates a non-soluble crystalline formation throughout the pores and capillary tracts of the concrete. Thus the concrete becomes permanently sealed against the penetration of water or liquids from any direction. The concrete is also protected from deterioration due to harsh environmental conditions.

Aekyung Chemical SL-100 is a DCPD type UPR.

Ilkalem AS IR-110T is ISO thixotropic unsaturated polyester resin for GRP applications.

Featherlite® FL-20 is an ultra-light filler to enhance the production process and improve end-product performance of materials it is added too. It is formulated for cast polymer applications as a means to reduce product weight and save costs, and provides 20% weight reduction and 27% resin demand.

Alabama Pigments Company Slate Class I is a color hardener which are a pigmented cementitious powder that can be broadcast or dusted onto the surface of freshly placed concrete, to create a dense, abrasion-resistant surface that is permanently colored. Color hardeners can be troweled, broom finished or textured and stamped to create authentic looking stone or patterned textures. The use of color hardeners make it possible to achieve any number of bright or light colors, or any combination of them on gray concrete.

STONETECH® Salt Water Resistant Sealer is a water based, penetrating sealer formulated to protect exterior surfaces from salt degradation due to salt water and deicing salt exposure. This effectively treats porous natural stone, tile, masonry and grout to prevent salt water damage and to minimize efflorescence. Great on steps, walkways and surrounding salt water pools.

Admix C-500 NF RED is added to the concrete mix at the time of batching. Admix C-500 NF RED consists of Portland cement, a red oxide pigment and various active, proprietary chemicals. These active chemicals react with the moisture in fresh concrete and with the by-products of cement hydration to cause a catalytic reaction which generates a non-soluble crystalline formation throughout the pores and capillary tracts of the concrete. Thus the concrete becomes permanently sealed against the penetration of water or liquids from any direction. The concrete is also protected from deterioration due to harsh environmental conditions.

Kel-Crete Premium Super Dry Admixture is a non-toxic admixture that is blended to provide water reducing, plasticizing, air entraining and gelling functions for the manufacture of pre-blended products for the plaster, masonry, shotcrete, concrete, etcetera industries. Normally the recommended amount to use is one ounce by weight per 100 pounds of portland cement/fly ash products. It meets EPA Leeds and Carbon Footprinting standards.

Classic Matte Sealer is an acrylic, single component sealer that is designed to be used over all of our stains and on polymer-modified cement toppings, waterborne colorants, concrete, brick, masonry, pavers, Spanish tile, stucco, and natural stone. Be sure to properly prepare surfaces before applying.

E-glass fiber 1080 is a balanced plain weave fabric.

Soric® LRC 3 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Gator Grip is a finely ground polymer material for addition to concrete sealers to provide slip resistance and fine texturing. It can be added into most film-forming water based and solvent based sealers. Gator Grip provides improved chemical and abrasion resistance. It is more comfortable to bare feet on treated surfaces than sand or aggregate additives.

Soric® XF 5 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

MATLINE+ 501 is designed for use as a core material in dry and wet-on-wet hand layup and spray lamination production. It is proven as an effective alternative to glass fiber core layers, delivering consistent thickness without adding excess weight, improving rigidity whilst lowering overall manufacturing costs.

Polipol 3401-TA-H20 is a Hand lay-up / Spray-up thixotropic preaccelarated polyster.

ROTEC® AES A 702 is AES, injection molding grade, impact.

Classic Satin Armor 2K Aliphatic-Polyurethane Sealer is a clear, 2-part component, voc< 19/1 63% solids, waterborne, special blend sealer that is designed to be used over all of our stains, as well as polymer modified cementitious toppings, masonry, concrete and waterborne colorants. May be used for exterior & interior. Satin Armor 2k provides UV stability and will not yellow.

Alabama Pigments Company Limestone Class I is a color hardener which are a pigmented cementitious powder that can be broadcast or dusted onto the surface of freshly placed concrete, to create a dense, abrasion-resistant surface that is permanently colored. Color hardeners can be troweled, broom finished or textured and stamped to create authentic looking stone or patterned textures. The use of color hardeners make it possible to achieve any number of bright or light colors, or any combination of them on gray concrete.

MATLINE+ 201 is designed for use as a core material in dry and wet-on-wet hand layup and spray lamination production. It is proven as an effective alternative to glass fiber core layers, delivering consistent thickness without adding excess weight, improving rigidity whilst lowering overall manufacturing costs.

AO 11B is an antioxidant additive with PE Resin.

True-Bond Kote™ is utilized for heavy impact, chemically resistant, industrial and commercial flooring. Resists chipping, corrosives, weather, bacteria, and impact. True-Bond Kote™ is also an excellent waterproofing material. True-Bond Kote™ will not separate from concrete. True-Bond 'Kote is utilized for heavy impact, chemically resistant, industrial, and commercial flooring. Resists chipping, corrosives, weather, bacteria, and impact Water- proofs. . One application lasts many years.

Lerpol 3633 is a high quality OrthoPhtalic resin, RINA approved for boatbuilding. They are formulated for rapid impregnation of fibers, no sagging on vertical surfaces and excellent throughcure. Various formulations are available, suitable for different thicknesses and different operating conditions. They are also available in low styrene emission version.

Classic satin armor 2k aliphatic-polyurethane sealer is a clear, 2-part component, voc < 19/1 63% solids, waterborne, special blend sealer that is designed to be used over all of our stains, as well as polymer modified cementitious toppings, masonry, concrete and waterborne colorants. May be used for exterior & interior. Satin armor 2k provides uv stability and will not yellow.