Products in Fillers, Levellers & Joints

NuSil™ CV2-1147 is a controlled volatility RTV silicone atomic oxygen protective coating.

Detroit Body Filler 60138 Brushable is a low viscosity, flowable adhesive. 60138 Brushable can be used for bonding, fairing, filling, radius, and bedding applications.

XOL 150 is a white aluminosilicate multicellular hollow sphere. They significantly reduce composite density. XOL-150 is surface modified for better dispersion, bonding, and strength. They can allow the formulator to reduce the weight and overall cost of their finished goods.

Seal Bond® 435 High Performance Sealant is a high performance joint sealant for a wide range of construction applications. SB 435 delivers tough, elastic sealing performance, for joints requiring compression and extension greater than 35%.

BAI YUN® RTV Neutral Silicone Sealant 300ml Caulk For Windows And Doors SS550 Neutral Silicone Sealant is one-component, neutral curing, general purpose construction silicone sealant with good adhesion to glass, aluminum, cement, concrete etc., specially designed for sealing in all type door ,window and wall joints.

Butyl-Tite™ Joint Sealant is an extruded tacky rubber sealant in rope form for use on manholes, storm sewer pipe, elliptical and other special shapes or concrete and metal surfaces. It is a permanently flexible non-shrinking compound and has extreme water and corrosion resistance. Excellent adhesion and ductility provide adherence to practically any clean dry surface when pressured into place.

Kamicryl 76 is an aqueous polymer emulsion specially designed for cementitious compositions. Cement mortars modified with Kamicryl-76 are hard, tough and durable. Compared with unmodified mortars, Kamicryl-76 modified mortars have superior flexural, compressive, adhesive and impact strength, as well as excellent abrasion resistance. They are especially useful where thin sections are desirable and where excessive vibration and heavy traffic are encountered.

Madol Madol 10 is a white dolomite. The dolomitic fillers are dust From Operating dolomitic rock and are among other products when crushing.

West System 405 Fileting Blend is a strong, wood-toned epoxy filler. Add it to your epoxy mix when making epoxy joints and filets on naturally finished wood. It mixes easily with epoxy. This product helps you create smooth filets that will need only a little sanding. Its color is a consistent brown. 405 Fileting Blend can be blended with other WEST SYSTEM Fillers to modify the shade of your epoxy mix. You can blend it into any WEST SYSTEM 105 Resin/20X Hardener combination, G/flex Epoxy 650, or G/5 Five-Minute Adhesive.

Tekapur Universal (gun) has excellent sound and thermal insulation. It adheres well to the majority of building materials, including wood, concrete, porous concrete, brick, metal, and aluminum, but not to polyethylene, silicone, or PTFE.

SurePoxy HMLV Class B is a 100% solids, two component, moisture-insensitive, epoxy resin system. This is a low viscosity, multi-purpose product that can be applied neat or filled with aggregate in temperatures as low as 32°F. SurePoxy HMLV Class B may be used with concrete, metals such as steel, wood, and other substrates.

51/44 System – Premium, Flexible Latex Tile Mortar is a high-performance, latex Portland cement mortar: 51/44 System – Premium, Flexible Latex Tile Mortar is a High Solids Thin-Set Mortar Additive for use with Flextile 51 Premium Floor & Wall Thin-Set Mortar in installing most ceramic tile and stone on properly prepared interior or exterior surfaces. The high latex solids content of Flextile 44 High Solids Thin-Set Mortar Additive increases safety margins on exterior applications where thermal expansion / contraction of tiles is a concern, where extreme freeze / thaw conditions exist, in water immersion applications and in other critical or extra-heavy service situations.

Pennsealer EE is a single component, waterbased, cationic, epoxy sealer. Specially designed urethane modified ATV epoxy polyelectrolyte emulsion offers unique features to this sealer, which upon cure, produces a tough, durable and protective finish to the treated surface.

ArmorPrime (726) is a straw/clear 100% solids two component epoxy specifically formulated to be used as both a primer and/ or a base coat. Due to the low viscosity of this product, it is an ideal choice to adhere to concrete creating a tenacious bond. This product can be applied as a “neat” coat, or can be mixed with aggregates such as fine mixed silica to aid in filling in rough or uneven substrates. ArmorPrime #726 has been designed for interior use only.

Hydroxyethyl Methyl Cellulose (MHEC) is also named as Methyl Hydroxyethyl Cellulose (HEMC),used as high efficient water retention agent, stabilizer, adhesives and film-forming agent in kinds of building materials.is widely used in industrial applications ,such as construction, detergent ,paint and coating ,we also can provide HEMC according to customers requirements. After modified and surface treatment, we can get the goods which is dispersed in water quickly, lengthen open time, anti-sagging, etc.

MAISSEN RDP 707U is a redispersible polymer powder(RDP)produced by spray-drying special water-based emulsion, mostly based on vinyl acetate and ethylene. It dissolves in water easily and quickly forms emulsion.

BAI YUN® BAIYUN Caulk Ceiling Wall Joint Class 20 Window And Door Silicone Sealant SS804 Silicone Joint Sealant is a one-component, neutral curing, general-purpose construction silicone sealant with good adhesion to glass, aluminum, cement, concrete etc., specially designed for sealing in all type of doors, windows, and wall joints.

West System 404-45 High-Density Adhesive Filler, 43 oz is an epoxy thickening additive. We developed it for maximum physical adhesive properties in hardware bonding, or anywhere that high-cyclic loads are anticipated. Blended with epoxy, it makes an excellent gap filler or structural filets. Use this filler wherever you need an especially strong bond. You can blend it into any WEST SYSTEM 105 Resin/20X Hardener combination, G/flex Epoxy 650, or G/5 Five-Minute Adhesive.

West System 407-B Low-Density, 14 lb is a blended microballoon-based fairing filler for WEST SYSTEM Epoxy. Add 407 to a mixture of epoxy resin/hardener to create a fairing putty. It’s easy to sand or carve this putty once it has cured. The filler is reasonably strong on a strength-to-weight basis. You can blend it into any WEST SYSTEM 105 Resin/20X Hardener combination, G/flex Epoxy 650, or G/5 Five-Minute Adhesive. Blended with epoxy to a “peanut butter” consistency, it will be easy to fair. The higher the percentage of 407 in your epoxy mix, the easier it will be to fair. Cures to a dark red/brown color.

Precision Epoxy Products FP-85 is the pigmented version of the FP Series Epoxies for use in surface plate applications. Available in 14 standard colors with custom colors available upon request. Both Floor Plate Epoxies are extremely durable, chemical resistant with excellent scratch and impact resistance.

Akfix 805P Multi Purpose PU Gun Foam is a single-component PU foam used with an applicator gun and features higher yield, easier application and reusability. It does not contain any propellant gasses which are harmful to the ozone layer.

NuSil™ CV2-1142 is a non-corrosive controlled volatility RTV silicone adhesive/sealant.

Goonvean Fibers TEC03CON407 are precision cut acrylic fibers with excellent heat and chemical resistant properties used for reinforcement in a wide variety of industrial applications.

Hydroxyethyl Methyl Cellulose (MHEC) is also named as Methyl Hydroxyethyl Cellulose (HEMC),used as high efficient water retention agent, stabilizer, adhesives and film-forming agent in kinds of building materials.is widely used in industrial applications ,such as construction, detergent ,paint and coating ,we also can provide HEMC according to customers requirements. After modified and surface treatment, we can get the goods which is dispersed in water quickly, lengthen open time, anti-sagging, etc.

Pilgrim Permocoat EM CBC IV Gel is a versatile system with excellent physical properties that make its consideration a requisite in many situations involving new construction or repair of concrete. EM CBC IV has a 35 year record of excellent performance. Used neat, it is an outstanding adhesive... mix it with an aggregate and you have a trowelable , no-shrink mortar for patching & topping, for splicing concrete pilings, for leveling heavy equipment and for anchoring bolts or re-enforcing steel. Use as a bonding adhesive between plastic concrete and hardened concrete.

SOLIMIDE® TA-301 foam can be cut into a variety of shapes and sizes, then faced or coated to meet end user requirements.

KEY #730-FC is a 100% solids fast cure epoxy adhesive/filler with <10 min. working time. KEY #730-FC is used to bond most materials including flooring materials, precast base, divider strip, marble/granite, ceramics, glass, cement board and drywall. KEY #730-FC is durable and impact resistant making it the ideal material for repair of concrete cracks, etc.

Hydroxypropyl MethylCellulose (HPMC) are widely used in construction, pharmaceutical,food, cosmetic, detergent, paints, as thickener, emulsifier, film former, binder, dispersing agent, protective colloids.We can provide the regular grade HPMC, we also can provide modified HPMC according to customer requirements. After modified and surface treatment, we can get the goods which is dispersed in water quickly, lengthen open time, anti-sagging, etc.

Quarzsand is for industrial use, mighty, workable silica sand deposits are of decisive importance. Nevertheless, chemical purity and constancy are not enough in order to apply silica directly as a raw material. In Quarzwerke plants silica sands are thoroughly prepared. The raw material has to pass exten-sive cleaning-, classification-, drying- and iron-free grinding processes in order to produce silica sands, flours and powders. For the production of silica flours and -powders with a defined grain size distribution separation processes are required in addition to iron-free grinding. Quarzwerke are able to produce silica powders with grain sizes down to 1 μm due to a fine-tuned combination of grind- and classification technology. Another refining step is the surface-treatment with silanes or silan-based substances which can be adjusted to the respective application.

Hydroxyethyl Methyl Cellulose (MHEC) is also named as Methyl Hydroxyethyl Cellulose (HEMC),used as high efficient water retention agent, stabilizer, adhesives and film-forming agent in kinds of building materials.is widely used in industrial applications ,such as construction, detergent ,paint and coating ,we also can provide HEMC according to customers requirements. After modified and surface treatment, we can get the goods which is dispersed in water quickly, lengthen open time, anti-sagging, etc.

Akfix 806 Door & Window Polyurethane Foam is a single-component, moisture-curing and self-expanding aerosol polyurethane foam. It is designed for easy dispensing through the straw adapter included with each can. It is designed for easy filling of door and window profiles with low expansion and pressure rates.

Fill-Loc™ Crack Repair is a two-component, VOC compliant, 100% epoxy floor patching product. It is designed to make repairs to small vertical and horizontal surface imperfections prior to applying a thin coating. It will quickly fill and span small cracks without slumping. It can also be used to skim coat over small roughed surface areas.

Solospheres® S-45 Solid Spheres are semi-solid ceramic microspheres. They are an excellent choice for applications requiring high strength, high temperature, and corrosion resistance. Solospheres® spherical morphology are shear thinning in liquid applications allowing formulator to reduce the VOC’s and increase filler loading. Solospheres® can easily disperse in a high intensity mixing or dispersion system in plastics.

Precision Epoxy Products SC-15P is a colored system formulated for use in machine shops for leveling a wide variety of applications from table tops to linear rail mounting platforms. The standard color is 'Black' but, it can be pigmented to a color of choice and is excellent for hiding substrate surfaces. It offers unparalleled adhesion to properly prepared steel surfaces without delamination. SC-15P is very durable, chemically resistant and is a poured application with advanced leveling characteristics for extreme accuracy. This version is pigmented to allow for additional de-air additives which makes this system a less technical application than the SC-15N.

Kish Company Vertical Calcium Oxide products have distinctly different properties and are suited for applications such as: Petrochemicals, Calcium Salts (industrial and food grade), Desicants, Chemical Processing, Water Treatment.