Products in Fillers, Levellers & Joints

Pangel J60 is a powder thixotropic additive, specially developed to act as an anti-sagging and anti-slipping agent. It improves system workability, suspension properties, and visual finish.It controls flow and consistency, ensuring optimal distribution of solvents, fillers, and other components.

Texicryl® 13-078 is a styrene acrylic copolymer emulsion, designed primarily as a binder for high performance ceramic tile adhesives. It has been designed to be formulated with a wide range of filler types into water resistant tile adhesives and grouts.

Texicryl® 13-620 is an APEO free pure acrylic copolymer emulsion designed for use in the building and construction industry. The polymer offers improved adhesion to various substrates and superior elasticity to relevant mixtures. It is designed for use in flexible mineral sealings, crack-bridging systems, waterproof coatings, fillers, putties, polymer-modified cement and mortar based mixtures of all kinds.

Texicryl® 13-602 is a styrene acrylic copolymer emulsion designed for use in flexible fillers, caulks, sealant applications and architectural coatings. It enhances the workability and technical performance of many products. It meets all environmental demands, such as low VOC, APEO-free and formaldehyde-free with no compromise on quality and performance.

Texicryl® 13-013 is a styrene acrylic copolymer emulsion containing a plasticizer. The product gives excellent adhesion on substrates and even at low temperature, the flexibility is good. It is suitable for paints, sealants, acrylics, highly filled putties and soft fillers applications.

Texicryl® 13-619 is a styrene acrylic copolymer emulsion designed for formulation of co-solvent free construction adhesives. It can be used in the formulation of high performance water resistant tile adhesives, fix and grouts and general purpose fillers. It meets all environmental demands, such as low VOC, APEO-free and formaldehyde-free with no compromise on quality and performance.

BD54750 is a low viscosity polyamine epoxy product. The BD54750 is designed for metals and plastics bonding. This product is ideal for highway and bridge deck repairs, potting, casting, and encapsulation, floor systems, linings of tanks and pipes, and coatings. This product has good chemical, corrosion, and water resistance. It is especially formulated for a 1:1 mix ratio for use in side by side cartridges, or to be used by hand mixing, or use with meter mix equipment. A handling cure is normally achieved at room temperature within 4 hours with a full cure at room temperature within 48 hours. To accelerate the final cure, or to quicken the handling simply elevate the temperature.

9200FR is a toughened, flame retardant, 2-part epoxy adhesive, designed to create long-lasting load-bearing joints. It creates tough vibration resistant bonds and is especially useful for joining dissimilar materials that will experience thermal cycling stresses or harsh environmental conditions. This smooth, non-sagging, thixotropic adhesive is excellent for use on vertical surfaces, for gap filling, and for potting electronics enclosures with gaps where a non-thixotropic encapsulant would flow through.

9200 is a toughened, 2-part epoxy adhesive, designed to create long-lasting load-bearing joints. It creates tough vibration-resistant bonds and is especially useful for joining dissimilar materials that will experience thermal cycling stresses or harsh environmental conditions. This smooth, non-sagging, thixotropic adhesive is excellent for use on vertical surfaces, for gap filling, and for potting electronics enclosures with gaps where a non-thixotropic encapsulant would flow through. For a flame retardant version, use 9200FR.

BactiBlock® 101 R4.47 is an antimicrobial additive suitable to be used in a broad variety of materials such as paints & coatings or building & polymeric materials.

USP-EAGLE (SS7-70) is Unsaturated Polyester resin amine accelerated, high rigidity, high reactivity, and medium viscosity it is used as stopper for marble, adhesive for marble and highly filled knifing fillers.

GA-EAGLE (THIX-9/50)50% is a Gel alkyd resin with high gel strength. Can be added to LOA and MOA to improve the workability.

Vycel U-3000 is a low viscosity diluent, low odor and water-white extender.

Vycel U is a low viscosity diluent of PU systems with excellent particle wetting. Excellent compatibility with Polyurethanes, Epoxy, Polyester and Phenolic resin systems.

BactiBlock® 920 B4 is an antimicrobial additive suitable to be used in a broad variety of materials such as paints & coatings or building & polymeric materials.

FluoroGrip® -Mx Membrane are stick fluoropolymer butyl lining for severe chemical and temperature resistance for concrete and steel substrates.

Vycel EF is a viscosity-reducing diluent with very low color and a low odor level for Polyurethane and Epoxy systems. Vycel EF is very hydrophobic and is completely compatible with Epoxy, Phenolics, MDI, TDI and their Prepolymers

C - EAGLE (PA 43/56) is pure acrylic for cement additive, joint fillers and sealing compounds with good adhesion to a wide variety of substrates. APEO freeExcellent flowability / Cement compatibility.

BactiBlock® In-can is an antimicrobial additive suitable to be used in a broad variety of paints, coatings, sealants and construction materials. This additive is specially designed to provide in-can preservation, that is to be used as preservative during product storage.

Protective Industrial Polymers PIP 125 ESD WR-GP is a two-component, waterborne, solvent free epoxy resin ground plane coating system designed to develop a uniform, non-tracking conductive ground plane to facilitate a consistent electrostatic discharge. When used in combination with PIP 100 ESD HB or PIP 170 ESD SR it produces lower surface resistance readings to meet the mandated requirements of ignition control applications.

Protective Industrial Polymers PIP 100 ESD HB is a high solids, three-component, high-build epoxy resin system designed to facilitate electrostatic control. PIP 100 ESD HB is supplied with a blended cycloaliphatic amine curing agent that exhibits good UV and chemical resistance. This product produces a durable gloss finish.

Tekapur Mega XXL Winter gun grade adheres well to most building materials, including wood, concrete, porous concrete, brick, metal, and aluminum. However, it does not adhere to polyethylene, silicone, or PTFE. It can withstand temperatures as low as -10°C.

Goonvean Fibers TEC03CON313 are precision cut acrylic fibers with excellent heat and chemical resistant properties used for reinforcement in a wide variety of industrial applications.

Extendospheres® SLG is one of our general purpose hollow sphere grades. The SL product lines will improve abrasion resistance, modulus elongation, and the flow of paints resulting in a more durable coating. Sphere One’s Extendospheres® are low density, high strength hollow ceramic spheres. They can allow the formulator to reduce the weight and overall cost of their finished goods.

Hydroxypropyl MethylCellulose (HPMC) are widely used in construction, pharmaceutical,food, cosmetic, detergent, paints, as thickener, emulsifier, film former, binder, dispersing agent, protective colloids.We can provide the regular grade HPMC, we also can provide modified HPMC according to customer requirements. After modified and surface treatment, we can get the goods which is dispersed in water quickly, lengthen open time, anti-sagging, etc.

EPOXYPLUS is the latest advancement in non-staining technology. Specially formulated with 100% solid epoxy resins and hardeners, EPOXYPLUS uses integrally colored quartz fillers, which eliminates pigment staining of tiles, typical of traditional cement and epoxy grouts and joint filters. It can be used for setting and grouting ceramic tile, pavers, marble and stone over a variety of substrates.

SurePoxy HM is a 100% solids, two-component, and moisture-insensitive, epoxy resin system. It is an all purpose, very high strength rigid adhesive designed for structural bonding of dry and damp materials free of standing water. SurePoxy HM may be used with concrete, metals such as steel, wood, and other substrates.

Jet Set 10 Hydrophobic Sealing and Grouting Compound is a solvent free, low viscosity resin for the sealing of leaking cracks and joints in concrete structures with continuous moisture exposure. The addition of 6% to 10% Catalyst will accelerate the resin to effectively seal off the leak. The mixed material will react with water to form a foam or gel that can seal and choke off the leak. Kaufman Jet Set 10 may be pumped using a single component pump.

CPP™ Gel™ is a two-component, high strength, extremely forgiving/tolerant, vertical and overhead, non-sag. fast set epoxy paste, packaged in a convenient 1-to-1 mix ratio to use as needed and restock. The Epoxytec CPP Gel provides a point-of-use application to save time and material. The material has a wide variety of applications and is often sought for concrete, steel, and other substrate repairs, filling, patching and as an adhesive. Epoxy-based material is a sealed and protective solution to combat corrosion.

Hydroxypropyl MethylCellulose (HPMC) are widely used in construction, pharmaceutical,food, cosmetic, detergent, paints, as thickener, emulsifier, film former, binder, dispersing agent, protective colloids.We can provide the regular grade HPMC, we also can provide modified HPMC according to customer requirements. After modified and surface treatment, we can get the goods which is dispersed in water quickly, lengthen open time, anti-sagging, etc.

Tekapur Standard (spray) has excellent sound and thermal insulation. It adheres well to the majority of building materials, including wood, concrete, porous concrete, brick, metal, and aluminum, but not to polyethylene, silicone, or PTFE.

Caco3 Filler 801 is a high quality calcium carbonate loading.

KEY #783 is a 100% solids, semi-rigid epoxy novolac joint filler used to provide chemical resistant protection for saw-cut joints (contraction/control joints) in concrete slabs or to repair existing damaged joints. KEY #783 absorbs the impact and shock of heavy loads and steel wheeled traffic, preventing erosion of control joint edges.

Tique Aqua Guard is a one component, fluid-applied vapor permeable air/ water-resistive barrier. It is applied directly to vertical, above-grade approved wall substrates and provides an excellent waterproof air barrier when combined with Tique Wall Systems joint and rough opening treatment.

INSS0285 Smoke and Acoustic Sealant is a high-performance acrylic based sealant for sealing construction joints and through penetrations in non fire-rated assemblies.