Products in Data Communication Cables

Micro Fine Cell foaming agents were developed specifically to produce a Micro Fine Cellular structure with the uniform distribution the cells on a consistent basis throughout the production cycle. Micro Fine Cell foaming agents are available as Endothermic or Exothermic foaming agents pelletized in the iDPel carrier compound.

Neoflon FEP NP-3180, in pellet and solid forms, combines features like chemical resistance, high extrusion speed, and high-temperature strength. Targeting markets in automotive, electrical, and electronics, it caters to applications like coaxial cable insulation and communication cable jacketing. With extrusion as its processing method, it offers versatility for specific end uses.

EverGlide® MB1550 is a Polyethylene terephthalate polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB250H is a High-density polyethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

THERMODAN® HF TP519CB has been developed specially to offer good processability, very fast extrusion process with very low die drool.

EverGlide® MB150H is a Polypropylene homopolymer polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB3950 is a Ethylene-vinyl acetate polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

THERMODAN® HF TP 543C has been developed specially to comply with the requirements of BS7655- 6.1 for types LTS1, 3 and 4; EN 50290-2-27 and HD 604 for type HM2 and HD 604 for type HM4. Cables made with TP543C have complied with IEC 60332, part 22, 23 & 24 – 1 and 3 fire tests.

OMNISTAB® UV 326 is a UV absorber of the hydroxyphenyl benzotriazole class which imparts good light stability to a variety of polymers.

Neoflon FEP NP-20, in solid form, shares features like chemical resistance, good electrical properties, and high-temperature strength with NP-101. Targeting markets in automotive, electrical, and electronics, it finds application in cables, coaxial cable insulation, film, and tubes. With processing methods including extrusion and film extrusion, it provides a reliable solution for various end uses.

Polyflon PTFE F-201, in powder or solid form, is a white resin processed through extrusion. Odorless and versatile, it caters to the consumer goods, electrical and electronics, and printing and packaging markets. Applications range from cables and industrial tanks to wires, offering a reliable solution across various end uses.

OMNISTAB® LS 770 is a low molecular weight hindered amine light stabilizer (HALS) for applications demanding particularly high light stability.

Micro Fine Cell foaming agents were developed specifically to produce a Micro Fine Cellular structure with the uniform distribution the cells on a consistent basis throughout the production cycle. Micro Fine Cell foaming agents are available as Endothermic or Exothermic foaming agents pelletized in the iDPel carrier compound.

Adell Plastics, Inc. Adell™ Polyamide AT-37 is a Polyamide 66 (Nylon 66) material filled with 33% glass fiber. It is available in North America.Important attributes of Adell Polyamide AT-37 are: Flame Rated Impact Modified Typical application of Adell Polyamide AT-37: Automotive

Neoflon PFA AP-201SH, in pellet and solid forms, shares features like chemical resistance, electrical resistance, excellent melt flow, and non-flammability with AP-201. Targeting markets in electrical and electronics and printing and packaging, it finds application in bottles, cables, communication cable jacketing, and industrial tanks. With processing methods including extrusion and injection molding, it provides a reliable solution for various end uses.

Neoflon FEP NP-30, in solid form, stands out with features such as chemical resistance, good electrical properties, and high-temperature strength. Targeting markets in automotive, electrical, and electronics, it finds application in cables, coaxial cable insulation, plenum cable insulation, tubes, and wires. With extrusion as its processing method, it offers a specialized solution for specific end uses.

Micro Fine Cell foaming agents were developed specifically to produce a Micro Fine Cellular structure with the uniform distribution the cells on a consistent basis throughout the production cycle. Micro Fine Cell foaming agents are available as Endothermic or Exothermic foaming agents pelletized in the iDPel carrier compound.

Micro Fine Cell foaming agents were developed specifically to produce a Micro Fine Cellular structure with the uniform distribution the cells on a consistent basis throughout the production cycle. Micro Fine Cell foaming agents are available as Endothermic or Exothermic foaming agents pelletized in the iDPel carrier compound.

THERMODAN® HF TP 543COT has been developed specially to comply with the requirements of BS7655- 6.1 for types LTS1, 3 and 4; EN 50290-2-27 and HD 604 for type HM2 and HD 604 for type HM4. Cables made with TP543C have complied with IEC 60332, part 22, 23 & 24 – 1 and 3 fire tests.

THERMODAN® HF TP851 has been developed specially to comply with the requirements of cable specifications BS 7629, BS 6387 CWZ, BS EN 50200, BS 8434-2 & BS 5839-1 Clause 26.2 PH120 Enhanced. TP851 complies with LTS3 in BS 7655.

THERMODAN® HF TP812 has been developed specially to offer good processability, fast extrusion process with very low die drool. TP812 is capable of meeting the flame retardant requirements of UL 1666, UL 1685, IEEE 1202, FT-4 in specific fiber optic constructions. It is also recognized as halogen free under UL 2885. It can be extruded using PVC extruders and screws. It possesses excellent tensile and flame retardant properties and meets the requirements of limited toxic and corrosive fume emission

A soft, colorable copper stabilized halogen free flame retardant (HFFR) thermoplastic vulcanizate, TPV (EPDM/PP) with superior UV – Ozone resistance.

SIVIC® 2870 is low acryonitrile based multipurpose grade polymer with good extrudability and cold flex properties for industrial hose, cable and conveyor belt.

D3-440-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

Wynca XHG-6220 is a two-component liquid silicone rubber for injection molding processes. It can be handled with high efficiency, no flash and low energy requirement. The rubber articles made with XHG-6220 is of high physical properties, good aging property, good dielectric property and high resistance to temperature extremes.

Kotex KGN-15MRA Polycarbonate is a glass fiber 20% reinforced, mold release translucent, dimensional stability, flame retardant, high rigidity.

D4-220-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

Saudi Carbonate SCC PCC 90C – YB is surface coated ultra fine PCC suitable to use in Cable Compounds. Its lower density, smaller particle size, calcite structure, purity and good dispersion in polymer matrix which controls volume resistivity. Better dispersion characteristics results increase in loading and output with smoother surface, good elongation at break, higher shore hardness, better tensile strength, good weathering properties and better electrical properties.

ebalta MG 425 is processed on a two-component low pressure device. The systems MG 400 / MG 425 / MG 475 are cured with the hardener PUR 19. By mixing MG 425 with MG 400 the E-modulus can variably between 630 – 1550 MPa. After grinding with a sand paper , grit 280, the surface can be varnished with a commercial lacquer. For better adhesion we recommend the use of a primer coat. Nitrocellulose lacquers have a better adhesion on polyurethane surfaces than on acryllacquer- systems. Release agent – please see category release agent

STARCOM E/5000 is a PVC grade product.

BTec™ BSI-9135-FP is an endothermic CFA’s chemicals that take heat out and typically produce much smaller cell structure creating improved processing, better physical properties and improved appearance.

Key to responding to accommodating high value-added plastics. Our antioxidants are used for various applications such as electric wires, high-voltage cables and resins that protect distribution cables. As the diversification of plastic picks up speed, better quality will be sought, including for components used to establish information networks. With our accumulated know-how and technology, we are actively engaged in research and development to meet these needs

POULOY® 2001B is applied in communication products, audio & video products, E/ E parts.

INNOPRENE 1350 is a product that is already completely cross-linked and there is no need for an extra cross-link process before its ultimate use. Also, it is possible to simplify the processes and reduce the prime cost as it is an environment-friendly material allowing for an easy recycle of scraps resulted from processing.

Preniphor™ EPFR-400A contains N and P, is a kind of halogen free environmentally friendly flame retardant. It has been developed especially for the thermoplastic polyurethane and thermoplastic elastomer (TPE). This flame retardant functions in the condensed phase and the gas phase. The FR TPU can be used in power cables, communication cables, geographic exploration cables and auto cables, etc. TPU with Preniphor™ EPFR-400A can pass the tests of UL 94 V-0 (0.75mm), UL 1581 VW-1 and other flame retardant grades.

A soft, colorable copper stabilized halogen free flame retardant (HFFR) SEBS based thermoplastic elastomer (TPE) compound with superior UV resistance.