Products in Medical: Polyetheretherketone (PEEK)

Ketron® CM CA30 Polyetheretherketone PEEK, a compression-molded, 30% carbon fiber-reinforced grade that offers exceptional impact, corrosion, chemical, and wear resistance. This black-colored material is designed for applications where high strength, stiffness, and thermal conductivity are needed. Features: 30% carbon fiber reinforced for added strength and stiffness Outstanding impact, corrosion, chemical, and wear resistance Reduced thermal expansion for improved performance High thermal conductivity for rapid heat dissipation Suitable for large parts and bearing applications Benefits: Extends the life of components by resisting wear and corrosion Improves pressure-velocity capabilities and bearing life by dissipating heat faster Provides 3.5 times higher thermal conductivity compared to unreinforced PEEK Offers even higher stiffness, mechanical strength, and creep resistance than Ketron GF30 PEEK Applications: Bearing applications Large parts Automotive industry Aerospace industry Medical industry Industrial machinery Chemical processing Ketron® CM CA30 PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your bearing applications, need a strong and stiff material for large parts or are in the automotive, aerospace, medical, industrial machinery or chemical processing industries, Ketron® CM CA30 PEEK is the ideal solution.

Ketron® CA30 Polyetheretherketone PEEK is a 30% carbon fiber-reinforced grade that exhibits even higher stiffness, mechanical strength, and creep and wear resistance that Ketron® GF30 PEEK. With a significantly reduced thermal expansion, optimum load carrying capabilities, and high thermal conductivity rates, Ketron® CA30 PEEK components are often favored for their ability to extend part life and rapidly dissipate heat in bearing applications.

KyronMAX® S-9230 is a high-performance polymer that combines the excellent strength, stiffness, and thermal resistance of PEEK (Polyetheretherketone) with the added strength and stiffness of ultra high-strength carbon fiber. This injection molding compound is designed to excel in demanding applications where high strength, stiffness, thermal stability, and chemical resistance are required.Key features:Ultra high strength: carbon fiber reinforcement provides added strength and stiffnessPEEK base: provides excellent thermal stability, dimensional stability and chemical resistanceInjection molding pellets: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength at high temperatures.Benefits:Improved strength and stiffness of components in demanding environments and high temperaturesIncreased resistance to wear and tear and high temperaturesEnhanced performance and durability of your products in high temperature and chemical environmentsPossibility to design and manufacture complex geometriesApplications:High strength structural components in the aerospace, medical, and industrial industries where high temperature, strength and chemical resistance is requiredComponents that require high strength and stiffness, such as gears, bearing components, and bushings in high temperature environmentsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesMedical devices, implants and components in medical equipment that require high strength and biocompatibility.KyronMAX® S-9230 is a versatile and reliable material that can help improve the performance and longevity of your products. It's only available in injection molding pellets form, it allows for efficient production and the ability to create complex geometries.Please note that no stock shapes are offered.It's also worth mentioning that PEEK is a biocompatible material and can be used in medical applications, but it's important to note that should be evaluated for the specific application and use case.

Ketron® LSG PEEK-CLASSIX™ White is a product available in the form of plates and rods, designed for dental applications. This material is characterized by features like ethylene oxide sterilizability, biocompatibility, excellent sterilization resistance, X-ray sterilizability, high stiffness, life science grade, gamma sterilizability, excellent mechanical strength, good mechanical properties, steam sterilizability, heat sterilizability, plasma gas sterilizability, and chemical resistance. It comes in the color white, making it suitable for dental applications.

Zeniva® ZA-500 PEEK is a high-performance specialty polymer known for its remarkable strength, advanced stiffness, and exceptional toughness. Specifically designed for structural, load-bearing implantable medical devices, this bio-stable plastic offers excellent fatigue and creep resistance, ensuring durability under continuous strain and repeated loading. In comparison to metals, it presents advantages such as reduced stress shielding, absence of heavy metal allergies or ion erosion, and radiolucent properties for interference-free X-ray and CT scanning procedures.

SABIC's Specialties Business LNP LUBRICOMP LCL33 compound is based on Polyetheretherketone (PEEK) resin containing 15% carbon fiber, 15% PTFE. Added features of this grade include: Wear Resistant, Electrically Conductive.

SABIC's Specialties Business LNP LUBRICOMP LFL36E compound is based on Polyetheretherketone (PEEK) resin containing 30% glass fiber, 15% PTFE. Added features of this grade include: Wear Resistant, Easy Molding.

LNP LUBRICOMP LX00430 compound is based on Polyetheretherketone (PEEK) resin containing proprietary fillers. Added features of this grade include: Wear Resistant.

Ecomass® Compound 3330TU96 Nat is a high specific gravity, tungsten powder-filled polyetheretherketone (PEEK) compound that is rigid. The processing method for this compound is injection molding. It is a nontoxic alternative to lead (Pb) used for weighting, balancing, and radiation shielding applications.

MD Graphene DURA PEEK Pellets incorporate a graphene oxide reinforcement with exceptional chemical resistance. DURA PEEK polymer provides long-term performance up to 255°C. This material provides long-term performance up to 240°C, with exceptional chemical resistance, excellent wear, and abrasion resistance.

MD Graphene ABV PEEK Pellets are reinforced with silver particles on Graphene Oxide (GO-Ag) and show exceptional resistance combined with a powerful antimicrobial. It is the first choice material for demanding healthcare applications, it incorporates graphite oxide reinforcement with silver particles. The ABV PEEK polymer provides long-term performance up to 255°C, with exceptional chemical resistance, and high resistance to wear and abrasion.

Pfluon Chemical 8100FP is a resin fine powder with diameter 50um,standard viscosity and capable for pressing mold,compound modication etc. It appears in white color.

MECHETEC® PEEK ( Polyetheretherketone) is a semi-crystalline high temperature thermoplastic that offers design engineers a truly unique combination of exceptional performance characteristics. When compared with other engineering polymers, this material ranks as the best or nearly the best in every performance category. MECHETEC® PEEK has a relative thermal index of 480°F and has a UL 94 flammability rating of V-0, with very low levels of smoke generation and toxic gas emission. Additionally, this material exhibits excellent electrical properties, which remain stable over a wide range of both temperatures and frequencies. MECHETEC® PEEK is chemically resistant to a wide range of organic and inorganic liquids and is insoluble in all common solvents. In addition, it is unaffected by steam and hot water and has a very low moisture absorption rate. This material offers superior dimensional stability and machines easily. While unfilled MECHETEC® PEEK offers good wear resistance, Polymer Industries also offers MECHETEC® PEEK with glass fiber filled options as well as Carbon and Teflon filled options. Formally known as Unitrex Peek. For more Info : Click Here

Pfluon Chemical 8800CF30 is a carbon fiber reinforced resin particle,standard viscosity,black color and capable for plastic forming process like injection, squeeze etc.

PEEKshrink® is a linear, semi–crystalline aromatic polymer, is considered one of the highest performing thermoplastic materials; it can withstand extreme temperatures, high pressure and caustic fluids. Now, Zeus has taken PEEK to an entirely new level of performance with PEEKshrink™. PEEKshrink™ provides a shrink-to-fit layer of protection for sensitive components and critical connections. PEEKshrink™ is an ideally suited product for challenging environments such as oil and gas exploration where abrasion, intense pressure, chemicals, water, or dielectric interference pose a threat to wires and electrical components. PEEKshrink™ is an obvious and optimal splicing aid for PEEK insulated wire. PEEKshrink™ is an alternative to traditional fluoropolymer protective coatings with its very wide working temperature range.

Thermec™ K 3350R30 is with medium viscosity, 30% glass fiber reinforced, is used for injection molding.

Pfluon Chemical 8100G is a pure resin particle,hypocrystalline,standard viscosity and capable for plastic forming process like injection,squeeze etc. It appears in beige color.

Pfluon Chemical 8200FC30 is a abrasion reinforced Wear resistant particle,standard viscosity,black color and capable for plastic forming process like injection, squeeze etc.

Polyarn bv PEEK - PolyEtherKetone is a workhorse – perhaps the closest to a perfect material that is utilized in a wide range of industries and in many different applications. It is known for its impressive durability in severe environments. Glass and carbon reinforced grades are among the strongest of all thermoplastics unfilled grades and they are highly resistant to some of the most chemically aggressive environments including high-pressure steam. Because of its robustness, PEEK is used to fabricate items used in demanding applications, including bearings, piston parts and electrical cable insulation. PEEK is considered an advanced biomaterial used in medical implants.

Pfluon Chemical 8200CF30 is a carbon fiber reinforced resin particle,standard viscosity,black color and capable for plastic forming process like injection, squeeze etc.

PEEK-OPTIMA™ Reinforced offers the benefits of unfilled PEEK-OPTIMA with the added advantage of greater mechanical strength and enhanced creep resistance. Additionally, it is a true structural polymer that offers improved wear performance over UHMWPE in articulating joints against various counterfaces. The compound is composed of short carbon fibers dispersed within a PEEK-OPTIMA polymer matrix. The resulting material has enhanced mechanical and physical properties for more demanding, load-bearing implants and applications requiring blood, bone or tissue contact of more than 30 days.

ISO TECH Kunststoff GmbH ISO-PEEK is a semi-crystalline, thermoplastic high-performance plastic which, in addition to very good mechanical properties, has high sliding properties. In addition, the material has a high temperature resistance. ISO-PEEK is often used for sliding guides and seals.

Pfluon Chemical 8900CF30 is a carbon fiber reinforced resin particle,standard viscosity,black color and capable for plastic forming process like injection, squeeze etc.

fluteck™ K303 PEEK is a high performance thermoplastics polymers based on unreinforced Polyetheretherketone (PEEK).

AFT Fluorotec AF801 Virgin PEEK material is a semi-crystalline thermoplastic typically used as a replacement for machined metals in a wide variety of high performance end-use applications.

Vertec™ 5001 is Vertec’s high elongation, compression molded unreinforced PEEK (polyetheretherketone) material. Its high mechanical properties at elevated temperatures, combined with excellent chemical and hydrolysis resistance, make it the most popular advanced thermoplastic material available today. The use of unreinforced PEEK material is increasingly growing across all industries for metal replacements and other applications. Now, with its FDA compliance, PEEK material can also be used to fabricate components in food and beverage as well as medical and pharmaceutical processing equipment.

Vertec™ 5000 is unreinforced PEEK (polyetheretherketone) material. Its high mechanical properties at elevated temperatures, combined with excellent chemical and hydrolysis resistance, make it the most popular advanced thermoplastic material available today. The use of unreinforced PEEK material is increasingly growing across all industries for metal replacements and other applications. Now, with its FDA approval, PEEK material can also be used to fabricate components in food and beverage as well as medical and pharmaceutical processing equipment.

Polyether Ether Ketone (PEEK) PEEK is a semicrystalline thermoplastic with excellent mechanical and chemical resistance properties that are retained to high temperatures. PEEK is regarded as one of the highest performing engineering thermoplastics in the world. PEEK is used to fabricate items used in demanding applications in aerospace, automotive, oil and gas and medical industries.

GEHR PEEK® MG (MEDI) is produced at a continuous operating temperature of this high-performance plastic ranges between approximately -40° C and +260° C. It features an extraordinary combination of very high rigidity, hardness, tensile strength and bending strength (high toughness and fatigue strength), high heat deflection temperature and excellent resistance to disinfectants and detergents. The hydrolytic stability is exceptionally high, so that repeated sterilization in steam is possible without any problems. PEEK is self-extinguishing according to UL94 specifications. The raw materials used meet the requirements of FDA and EU 10/2011 for food contact materials.

Peek-Optima™ Natural LT3 is the foundation polymer of the Peek-Optima product family, features nearly 15 years of implantation, in a diverse range of applications, and successful use in regulatory approved devices. Available in a range of forms, Peek-Optima Natural LT3 delivers a variety of high performance options virtually unmatched in a radiolucent implantable biomaterial.

Peek-Optima™ Wear Performance G is specifically designed to meet the critical demands of orthopedic joint arthroplasty. The polymer combines the material properties of Peek-OptimaTM Natural with carbon fiber technology to provide superior wear resistance against hard counter surfaces, such as metal and ceramic.

Nemcon™ H-series products are designed for use in high performance electronic assemblies where heat removal is critical to system performance. Nemcon™ H PO DP117/X2 is a thermally conductive polyetheretherketone, offering excellent chemical resistance, good stiffness and high HDT. It should be used in demanding applications where thermal management must be accomplished in harsh environments.

Thermec™ K 3350CF30 is with medium viscosity, 30% glass fiber reinforced, is used for injection molding.