Products in Industrial: Cables

ELASTOSIL® LR 3856/20 A/B is a high-oil-bleeding liquid silicone rubber of the ELASTOSIL® LR 3856 series. It is a paste-like, easily pigmentable, two-component product with short curing times and very good demoldability (high hot tear resistance). Shortly after curing, a thin oil film with lubricating properties forms on the surface. The vulcanizates are opaque, have very good mechanical and electrical properties, excellent cut resistance, and a low compression set without post-cure.

ELASTOSIL® LR 3005/60 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3005 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.

ELASTOSIL® LR 3846/20 A/B is a considerable oil-bleeding, liquid silicone rubber of the ELASTOSIL® LR 3846 series. It is a paste-like, readily pigmentable, two-component product with a short curing time. Shortly after the curing process, a slight, thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque, have good mechanical and electrical properties, and have very low compression sets.

ELASTOSIL® LR 3842/40 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3842 series. It is a paste-like, easily  pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

ELASTOSIL® LR 3004/40 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3004 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

ELASTOSIL® LR 3844/50 A/B is an oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3843 series. It is a paste-like, easily pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

ELASTOSIL® LR 3842/60 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3842 series. It is a paste-like, easily  pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

ELASTOSIL® LR 3072/30 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3072 series. It is a paste-like, easily pigmentable, two-component compound with an extremely short curing time. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and have good mechanical and electrical properties.

ELASTOSIL® LR 3846/30 A/B is a considerable oil-bleeding, liquid silicone rubber of the ELASTOSIL® LR 3846 series. It is a paste-like, readily pigmentable, two-component product with a short curing time. Shortly after the curing process, a slight, thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque, have good mechanical and electrical properties, and have very low compression sets.

ELASTOSIL® LR 3841/50 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3841 series. It is a paste-like, easily  pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

ELASTOSIL® LR 3072/50 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3072 series. It is a paste-like, easily pigmentable, two-component compound with an extremely short curing time. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and have good mechanical and electrical properties.

HDK® T40 is a standard synthetic, hydrophilic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity commonly used in various industrial applications. HDK® T40 finds applications in flexographic printing, gravure printing, industrial wood coatings, inkjet paper, offset printing, and printing inks.

ELASTOSIL® LR 3072/40 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3072 series. It is a paste-like, easily pigmentable, two-component compound with an extremely short curing time. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and have good mechanical and electrical properties.

ELASTOSIL® LR 3842/70 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3842 series. It is a paste-like, easily  pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

ELASTOSIL® LR 3003/30 R A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time. Its vulcanizates are noted for their high transparency and excellent mechanical properties.

POWERSIL® 600 A/B is a pourable, addition-curing, two-component silicone rubber that cures at room temperature. It is specifically designed for casting applications and forms soft products with high mechanical strength. This ready-to-use, two-component system is very easy to process thanks to its low viscosity. It offers excellent dielectric properties and is best suited for outdoor applications due to its UV and weathering resistance, as well as its excellent hydrophobic properties.

ELASTOSIL® LR 3843/30 A/B is an oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3843 series. It is a paste-like, easily pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

ELASTOSIL® LR 3852/50 A/B is a low-oil-bleeding liquid silicone rubber of the ELASTOSIL® LR 3852 series. It is a paste-like, easily pigmentable, two-component product with short curing times and very good demoldability (high hot tear resistance). Shortly after curing, a thin oil film with lubricating properties forms on the surface. The vulcanizates are opaque, have very good mechanical and electrical properties, excellent cut resistance, and a low compression set without post-cure.

ELASTOSIL® LR 3844/40 A/B is an oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3843 series. It is a paste-like, easily pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

ELASTOSIL® LR 3844/30 A/B is an oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3843 series. It is a paste-like, easily pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

ELASTOSIL® LR 3842/50 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3842 series. It is a paste-like, easily  pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

HDK® T30 is a hydrophilic, synthetic, amorphous silica produced through flame hydrolysis. It is a standard product widely used in various industrial applications. HDK® T30 is a white colloidal powder of high purity. It finds application in inkjet paper, make-up, powder coatings, printing inks, and rheology control.

ELASTOSIL® LR 3851/50 A/B is a low-oil-bleeding liquid silicone rubber of the ELASTOSIL® LR 3851 series. It is a paste-like, easily pigmentable, two-component product with a short curing time and very good demoldability (high hot tear resistance). Shortly after curing, a thin oil film with lubricating properties forms on the surface. The vulcanizates are opaque, have very good mechanical and electrical properties, excellent cut resistance, and a low compression set without post-cure.

Dynasylan® 1122 is a secondary aminofunctional ethoxysilane, characterized by two symmetric silicone atoms. It functions as an adhesion promoter between inorganic materials (such as glass, metals, fillers) and organic polymers (including thermosets, thermoplastics, elastomers). In addition to its role as a surface modifier, Dynasylan® 1122 can be employed for the chemical modification of various substances.

Dynasylan® GLYMO is a bifunctional organosilane, featuring a reactive organic epoxide and hydrolyzable inorganic methoxysilyl groups. This dual reactivity empowers Dynasylan® GLYMO to chemically bond with both inorganic materials (e.g., glass, metals, fillers) and organic polymers (such as thermosets, thermoplastics, elastomers). It functions as an adhesion promoter, crosslinking agent, and surface modifier.

Dynasylan® 1505 is an amino-functional silane which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers) and as a surface modifier. This liquid product finds its use in coatings, primers, and industrial additives like foundry resins. Compatible with glass and metal substrates, it's your go-to for various applications, from abrasives manufacturing to pipes and cables. Elevate your materials with Dynasylan® 1505.

Dynasylan® AMEO is a bifunctional silane, encompassing a reactive primary amino group and hydrolyzable ethoxysilyl groups. Its dual reactivity enables Dynasylan® AMEO to establish chemical bonds with both inorganic materials (e.g., glass, metals, fillers) and organic polymers (such as thermosets, thermoplastics, elastomers). It serves as an adhesion promoter, crosslinker, and surface modifier.

Dynasylan® HYDROSIL 2926 is a versatile organosilane solution designed to enhance various applications. This water-based product acts as a surface modifier, crosslinking agent, and adhesion promoter. It effectively works with polymers like Polyethylenes (PE), Polypropylenes (PP), Epoxies (EP), and more. Meeting regulatory standards such as REACH Exempt, this liquid solution is available in cans and drums. Trust in its high performance and compatibility for improved results.

AEROSIL® R 972 is hydrophobic fumed silica grade treated with DDS (Dichlordimethylsilane). The moderate hydrophobicity of these AEROSIL® products is suited for defoaming properties in the presence of appropriate hydrophobic liquids. They are recomended for improving the sedimentation stability of defoamer dispersions as well.

Dynasylan® SIVO 214 is an aminofunctional silane composition with enhanced crosslinking activity. It serves as an adhesion promoter, facilitating bonding between inorganic materials (such as glass, metals, fillers) and organic polymers (including thermosets, thermoplastics, elastomers). Additionally, it functions as a surface modifier and supports chemical modification of various substances.

Dynasylan® TRIAMO is an organofunctional silane, possesses three reactive amino groups and a hydrolyzable trimethoxysilyl group. Its dual reactivity enables chemical binding to both inorganic materials (e.g., glass, metals, fillers) and organic polymers (e.g., thermosets, thermoplastics, elastomers). This versatile compound acts as an adhesion promoter and surface modifier. Presenting as a clear, light to dark yellow liquid with a subtle amine-like odor, Dynasylan® TRIAMO is soluble in alcohols, ketones, esters, and aliphatic and aromatic hydrocarbon solvents.

Dynasylan® GLYEO is a bifunctional organosilane, features a reactive organic epoxide and a hydrolyzable inorganic triethoxysilyl group. Its dual reactivity facilitates chemical bonding to both inorganic materials (e.g., glass, metals, fillers) and organic polymers (e.g., thermosets, thermoplastics, elastomers). Serving as an adhesion promoter, crosslinking agent, and surface modifier, Dynasylan® GLYEO is a colorless, low-viscosity liquid with a subtle terpentine-like odor. It readily dissolves in alcohols, ketones, and aliphatic and aromatic hydrocarbons.

VESTAKEEP® 3300 G High Purity is an unreinforced polyether ether ketone specifically designed for injection molding and extrusion. Refined using Evonik's advanced filtration technology, this medium-viscosity polymer offers exceptional thermal and chemical resistance. Parts manufactured with VESTAKEEP® 3300 G High Purity exhibit low flammability, ensuring enhanced safety. Compatible with standard thermoplastic machines, it can be easily processed. For injection molding, we recommend a melt temperature range of 360°C to 380°C with a mold temperature of 160°C to 200°C, preferably 180°C. This product is supplied in 25 kg boxes with moisture-proof polyethylene liners, conveniently packaged as granules. Choose VESTAKEEP® 3300 G High Purity for its superior properties and reliability in your injection molding and extrusion applications.

Dynasylan® MEMO is a revolutionary solution for enhancing polymer and resin performance. As a versatile surface modifier and coupling agent, it excels in various applications. This product boasts exceptional chemical resistance, improving filler dispersion and mechanical properties in plastics and elastomers. With features like acid and alkali resistance, low viscosity, and good wet adhesion strength, Dynasylan® MEMO transforms materials into high-performance wonders. Experience its benefits in cables, pipes, and more.

AEROSIL® 200 is a hydrophilic fumed silica with a specific surface area of 200 m²/g.

Dynasylan® HYDROSIL 2627 is an innovative surface modifier and crosslinking agent that transforms materials. Designed for glass and metal substrates, this VOC-free organosilane enhances adhesion and coupling. With a liquid water carrier, it ensures excellent processability. From cables to laminates, Dynasylan® HYDROSIL 2627 revolutionizes your plastics and elastomers with its versatile benefits.