Products in Other Military & Defense Applications

E-CAST Resin with F-28 / 385 Hardener in general used as, 45 seconds quick setting epoxy for adhesive and patching applications.

Hummel Croton Barium Nitrate (White Crystal) is use to manufacture other barium compounds. It is used by the pyrotechnic industry for the production of green fire and green signal flares. It also has uses in the vacuum tube industry.

Sentinel CanadaSENT-46000 is a light tan color synthetic based semi-fluid grease with a lithium stearate thickener. It is fortified with a blend of high performance additives providing antioxidation, anticorrosion, antirust and antiwear properties.

DynaSpec® MIL-PRF-22750 High Gloss is a two component, high solids epoxy coating. Grade A: For Navy and Army equipment requiring weather resistance. Grade A approved products can also be used as a Grade B material, for use on the interior of tactical equipment. The color of the coating is available in a wide variety of colors and gloss ranges including high gloss, semi-gloss and lusterless. Coating colors are designated by FED-STD-595 color chip number.

Mason Color Works Chrome Antimony Titanium Buff Rutile - 7424 Buff 24 is an inorganic pigment, is a reaction product of high temperature calcination in which Titanium (IV) Oxide, Chromium (III) Oxide, and Antimony (V) Oxide in varying amounts are homogeneously and ionically interdiffused to form a crystalline matrix of rutile. Its composition may include any one or a combination of the modifiers Al2O3, MnO, NiO, SrO, WO3, or ZnO.

E-Tec 521 is a one-of-a-kind, water-based wax emulsion that serves as a dry film lubricant as well as a corrosion preventive. It is suggested for use on artillery shell casings, small arms ammunition clips, and other military weatherproofing applications. E-Tec 521 is also a good piano stringing lubricant and an excellent corrosion preventive and dry film lubricant for steel strapping. E-Tec 521 is used as a torque reducer and corrosion resistant lubricant on a variety of fasteners, as well as a dry film lubricant in the installation of a variety of rivets. This product is intended for use as a corrosion-preventive and decorative coating on cast iron and over-treated surfaces such as phosphate, bonderized, and anodized surfaces.

E-CAST Resin with F-28/F-14 Hardener is a Good adhesion to metal, plastic and ceramic. Meets requirements of FDA under 21 CFR 175.300 and Mil Spec. MIL-A-81236.

Plascore Aramid Fiber PN1-1/8-6.0-OV is a commercial grade aramid fiber honeycomb is manufactured from Meta-Aramid paper and coated with a heat resistant phenolic resin.

Gencote 518 ® PFA has properties comparable to or better than PTFE and FEP fluoropolymers. has high temperature strength and stiffness, as well as excellent crack resistance and weatherability.

Sofnocat® 514 is highly active precious metal catalysts, formulated for ambient temperature oxidation of unwanted contaminants in breathable gasses. Specific uses include: conversions of carbon monoxide in breathing gas filters, removal of hydrogen within enclosed environments, abatement of volatile organic compounds (VOCs) and obtaining ultra high purity carrier gasses for electronic component manufacture.

The AMPARMOR® 2000 series is a uniquely engineered microcapsule containing a patented blend of healing agent based on epoxy functionalized polymers, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating applications where coating self-healing is needed for extended coating durability. The AMPARMOR® 2000 series is recommended for use in solvent-based, water-based and powder coatings, and is compatible with most coating resin types including epoxy, polyester, polyurethane and acrylic systems.

METAL-CLAD® ALKYD ENAMEL 1-HES-7400 is a all-purpose, durable utility enamel designed for new construction, industrial maintenance, OEM, and metal fabrication applications. Combines state-of-the-art corrosion protection with excellent gloss retention, superior durability, and onecoat coverage. May be applied direct to metal without a primer. It is used as airless or conventional spray.

Velsicol CHLORENDIC ANHYDRIDE is a solid, reactive flame retardant. An acid anhydride with a chlorine content of 54.5%, it imparts permanent flame retardance, high heat distortion, and excellent corrosion and abrasion resistance to resins such as unsaturated polyesters and alkyds. Chlorendic Anhydride is also used as a cross-linking agent in epoxy resins as a low-smoke component in polyols for rigid polyurethane foams and in UV curable inks and coatings for its adhesion to metal. Resin systems containing Chlorendic Anhydride can be formulated to meet ASTM E84 (Underwriter’s Tunnel Test) UL-94 and ASTM E 162-78 (Surface Flammability Test) as well as to meet U.S. military specifications for flame retardant, corrosion- resistant coatings.Unsaturated polyesters resins made from Chlorendic Anhydride are used in flame-retardant, glass- reinforced polyester composites for boats, construction panels, electrical applications and machine housings. In polyester corrosion-resistant applications, Chlorendic Anhydride is used in piping and in tanks and scrubbers for the chemical, fertilizer and pulp industries.Epoxy resins from Chlorendic Anhydride can be used as laminates for electrical uses, potting and encapsulation, adhesives requiring flame resistance, and high-heat distortion and protective coatings where permanent flame retardance, heat resistance, corrosion resistance and abrasion resistance are required.Alkyd coatings from Chlorendic Anhydride-based alkyds are used extensively for industrial and marine coatings applications. They are used in approved coating formulas, meeting military specifications Mil-R- 21417 for Navy ships and in industrial environments requiring chemical resistance combined with flame retardance.UV curable ink and coatings from Chlorendic Anhydride are used in polyester-based coatings and inks to provide good adhesion to metal, fast curing and hardness. In heat-fusible polyester and alkyd inks, it provides good adhesion to plastics, flexibility and high gloss.

Plascore Aramid Fiber PN1-3/16-2.0-OV is a commercial grade aramid fiber honeycomb is manufactured from Meta-Aramid paper and coated with a heat resistant phenolic resin.

BONDiT™ A-3 is a high performance, high temperature moisture resistant, primer, adhesive, adhesion promoter and additive used with metals, glass & ceramics, elastomers and polymers. BONDiT™ A-3 offers a wide range of capabilities for moisture resistance chemical bonding betweenminerals and polymers, as well as dissimilar polymers. it is used as a primer coat and additive for other BONDiT™ coatings and encapsulants. BONDiT™ A-3 may be used as an additive to other coatings, fiber fills, and adhesives to promote superior improvement in performance in harshenvironments.

Prasol Chemicals HEXYLENE GLYCOL is used in emulsions such as paints and varnishes, hydraulic fluids, oils and emulsions in textile and leather industry.

M.M.P MMP3000 is used in slurry explosives/ ammunition/ refractories.

Sentinel CanadaSENT-6083 is a petroleum based, low viscosity hydraulic fluid and preservative oil developed to meet the severe duty demands of today’s military and industrial equipment. The latest additive technology is used to provide high oxidation resistance, shear stability, corrosion and rust protection, and anti-wear properties.SENT-6083 is designated as a P-15 corrosion protectant under MIL-STD-2073.1C.

E-Tec 521-B is a one-of-a-kind, water-based wax emulsion that serves as a dual purpose dry film lubricant and corrosion preventive while deepening the black finish. It is suggested for use on artillery shell casings, small arms ammunition clips, and other military weatherproofing applications. E-Tec 521-B is also a good piano stringing lubricant and an excellent corrosion preventive and dry film lubricant for steel strapping.

Rose Mill Tungsten Disulfide is offered as a 99.9% minimum purity tungsten disulfide powder by rose mill company, manufacturer of Bemol brand lubricants.

Plascore Aramid Fiber PN1-1/8-5.0-OV is a commercial grade aramid fiber honeycomb is manufactured from Meta-Aramid paper and coated with a heat resistant phenolic resin.

Plascore Aramid Fiber PN1-1/8-4.0-OV is a commercial grade aramid fiber honeycomb is manufactured from Meta-Aramid paper and coated with a heat resistant phenolic resin.

Premier Rubber Membrane® system is a modified asphalt emulsion system using exact formulated polymers providing unique elastomeric performance. This product is engineered to achieve a seamless monolithic membrane that will bond 100% to most construction materials.

Miller-Stephenson Chemical MS-470C Urethane Conformal Coatings is a non-flammable, solvent-based, one-component polyurethane conformal coating provided in the convenience of aerosol. Our coating provides excellent electrical and barrier properties in a thinfilm applications on components and PCBs. When fully cured, the applied urethane coating exhibits superior toughness, abrasion resistance, and excellent moisture and chemical resistance. MS-470C will maintain its properties even after long exposure to the elements with minimal color change.

Everlube® 812 is a thermally-cured, MoS2 based solid film lubricant with a sodium silicate binder system. This coating is specifically designed to provide lubrication in higher temperature applications. Everlube® 812 provides a low coefficient of friction and good wear life, even at elevated temperatures.

United Resin Corporation Epoxy Bond D.G. Resin with 141 Hardener is an unfilled epoxy system with a room temperature cure with excellent adhesion to metals, plastics and ceramics.

Mason Color Works Cobalt Chromite Blue-Green Spinel - 7236 Blue 36 is a high-performance cobalt chromite based pigment, is designed to provide outstanding heat resistance, chemical stability and outdoor durability. This mixed metal oxide pigment meets the demanding performance requirements of the military, aerospace and architectural industries. Mason Color 7236 is recommended for all coating formulations requiring the ultimate in chemical, heat and UV durability.

METALIZE® UNIVERSAL PRIMER 8-PP-5181 is a high performance, heavy duty primer offering outstanding corrosion protection for steel and fabricated metal products. This universal primer may be used under urethanes, epoxies, and other high performance topcoats, and also functions as a barrier coat over conventional coatings which are susceptible to strong solvents. It is used as airless or conventional spray

Flexible Foam Polyether Urethane is a lower density flexible urethane foam used in industrial packaging applications where higher loads are involved. It is a low cost, high resilient open cell flexible foam. It can be formulated to meet the MIL-PRF-26514, Cal-117, MVSS302, UL-94, and the FAR 25.853(a) specifications.

Gencote 519 ® FEP is a tetrafluoroethylene/hexafluoropropylene copolymer. Gencote-519-FEP is chemically inert due to its complete fluorination. This, together with the high temperature, Gencote-519-S has a temperature range of up to 390°F and nonstick properties. FEP is an excellent universal coating for harsh chemical service.

METAL-CLAD® ALKYD ENAMEL 8-HES-1722 is a all-purpose, durable utility enamel designed for new construction, industrial maintenance, OEM, and metal fabrication applications. Offers state-of-the-art corrosion protection with excellent gloss retention, superior durability, and one-coat coverage. May be applied direct to metal without a primer.

Ampac Products Ammonium Perchlorate is an oxidizer that is primarily used as a key component in solid rocket propellant. It is used in the aerospace, national defense and commercial sectors. American Pacific's production of aerospace-grade AP began more than 50 years ago in Nevada, U.S., utilizing a proprietary process of electrolytic oxidation, crystallization, screening and blending that yields a chromate-free product.

Mason Color Works Chrome Manganese Zinc Brown Spinel - 7139 Brown 39 is an inorganic pigment, is a reaction product of high temperature calcination in which Chromium (III) Oxide, Manganese (II) Oxide and Zinc (II) Oxide in varying amounts are homogeneously and ionically interdiffused to form a crystalline matrix of spinel. Its composition may include any one or a combination of the modifiers A12O3, NiO, SiO2, SnO2, or TiO2.

12/34 Miracle Formula® is the most effective ALL-IN-ONE formulation on the market today. It’s lubricating, moisture displacing, penetrating, and corrosion prevention abilities is unsurpassed by any single product of its kind.

Plascore PN1 Aramid Fiber -3/16-4.0-OV is a commercial grade aramid fiber honeycomb is manufactured from Meta-Aramid paper and coated with a heat resistant phenolic resin.

E-CAST Resin with F-28 / 282 Hardener is a high impact, vibration resistant, flexible adhesive for metals, plastics, wood and ceramics.