Products in Other Industrial Applications: Processing Aid

TEGO® Antifoam 1488 is a versatile emulsion-based anti-foaming agent tailored for various applications. It effectively controls foam formation in processes like emulsion polymerization and textile sizing. With good compatibility, it finds use in diverse industrial additives, including metalworking fluids and nonwovens. This emulsion-type additive is available in drums, catering to different production scales. Its performance spans markets like adhesives and sealants, fluids and lubricants, and building materials. TEGO® Antifoam 1488's role in polymer dispersions manufacturing adds to its versatility and value.

TEGO® Antifoam KS 95 is a self-emulsifying organic antifoam concentrate enhanced with minor amounts of organo-siloxanes for improved efficiency. This antifoam is well-suited for industrial applications, specifically as an anti-foaming agent, and finds utility in various processes including polymerization, wastewater treatment, and suspension polymerization.

Trilene 65 DLC-A is a free-flowing powder made by combining Trilene liquid polymer and silicon dioxide. The blend is nominally 68% EPDM polymer and 32% silica. It is available as a dry, free-flowing powder that is easy to measure, store and transfer. DLC incorporates quickly and thoroughly into various elastomer systems, and gives quality and processing advantages when compared to neat polymer. Trilene 65 DLC-A is effective in EPDM, BR, NR, SBR and other elastomers.

Endex 1041™ is a chemical foaming agent which utilizes innovative technology to produce superior quality foamed products. It has a high gas yield and the fast response time typical of exothermic chemical foaming agents, and generates fine, closed-cell foams, which result in moldings and extrusions of high quality.

ULTRA-PEP™ 90 is a multi functional processing additive. ULTRA-PEP™ 90 works as a mild mastication agent in the early stage of NR compounding and subsequently aids filler dispersion and down line processing, like extrusion and mold flow. Since the mastication effect is slower than with common peptizing agents, fewer break downs of polymer chains can be observed, resulting in better physical and dynamic properties. ULTRA-PEP™ 90 can be added in the masterbatch compound with other compounding ingredients and therefore a pre-mastication step is not needed. As such, additional cost saving could be achieved.

Ishihara Sangyo Kaisha Ltd. Titanium oxide MC-90 has been widely used as a carrier material for catalysts mainly used in thermal power plants, waste incinerator exhaust gas treatment equipment, automobile exhaust gas purification equipment, etc. Titanium oxide material is characterized by its strong resistance to deterioration of catalyst performance due to sulfur components in fuel, and the role of titanium oxide for catalyst carriers will continue to become more important for the conservation of the global environment.

Endex 1750™ is a 50% concentrate in a polymer carrier. It can be used in a wide range of commodity and engineering plastics, combining quality and efficiency with the benefits of versatility and cost effectiveness.

Tarene 20 is a low-cost, dark, non-staining, thermoplastic oleo-resinous product having a naval stores base. The performance properties are comparable or superior to pine tar. Tarene 20 finds its widest application as a plasticizer, tackifier, and processing aid in rubber compounding. Other potential uses include adhesives, tar modifications, epoxy extension, coatings, mastics, and use as a low-cost acid for emulsions.

Intergulf Empol AD-LDP-PPA-25001 is a PPA with base polymer PE and 2% active content.

Endex 2650™ is a high efficiency pelletized concentrate, in a thermoplastic polymer carrier. It is designed for use in both commodity and engineering plastics, and may be dried with the polymer if needed. It combines its endothermic properties, quality and efficiency, with versatility and cost-effectiveness

Endex 1040™ is a chemical foaming agent which utilizes innovative technology to produce superior quality foamed products. It has a high gas yield and the fast response time typical of exothermic chemical foaming agents, and generates fine, closed-cell foams, which result in moldings and extrusions of high quality.

Natrochem CI 50 DLC-A is a coumarone-indene resin-silicon dioxide blend widely used in rubber, adhesive, paint, coating and allied industries.

ULTRA-LUBE™ 480 is a highly effective processing additive for specialty polymers. Its unique structure is particular suitable to improve flow and release of ECO compounds resulting in lower reject rate due to poor hot tear of ECO vulcanisates. Besides, it helps in preventing mold fouling. ULTRA-LUBE™ 480 also works very well to improve extrusion characteristics of NBR/PVC blend compounds.

Natro-Rez 50 is a Coumarone-Indene resin and widely used in rubber, adhesive, paint, coating, and allied industries. Natro-Rez 50 is used primarily in dark rubber compounds as a tackifier and processing aid. Natro-Rez 50 is also available as a dry liquid concentrate, CI 50 DLC?-A at 74% actives.

Ishihara Sangyo Kaisha Ltd. Titanium oxide MC-50 has been widely used as a carrier material for catalysts mainly used in thermal power plants, waste incinerator exhaust gas treatment equipment, automobile exhaust gas purification equipment, etc. Titanium oxide material is characterized by its strong resistance to deterioration of catalyst performance due to sulfur components in fuel, and the role of titanium oxide for catalyst carriers will continue to become more important for the conservation of the global environment.

Tarene 90P is a low-cost, dark, non-staining, thermoplastic oleo-resinous product having a pitch base, with viscosity adjustments made with a process oil. The performance properties are comparable to or superior to pine tar. Tarene 90P finds its widest application as plasticizer, tackifier, and processing aid in rubber compounding. Other potential uses include adhesives, tar modifications, epoxy extension, coatings, mastics, and use as a low cost acid for emulsions.

Tarene 30 is a low-cost, dark, non-staining, thermoplastic oleo-resinous product having a naval stores base. The performance properties are comparable or superior to pine tar. Tarene 30 finds its widest application as a plasticizer, tackifier, and processing aid in rubber compounding. Other potential uses include adhesives, tar modifications, epoxy extension, coatings, mastics, and use as a low-cost acid for emulsions.

Endex 1725™ is a 25% concentrate in a polymer carrier. It can be used in a wide range of commodity and engineering plastics, combining quality and efficiency with the benefits of versatility and cost effectiveness.

Endex 100™ is a 100% active, free-flowing powder. It can be used in a wide range of commodity and engineering plastics, combining quality and efficiency with the benefits of versatility and cost effectiveness.

Endex NBC 2750™ is a 50% concentrate in a polymer carrier. It can be used in a wide range of commodity and engineering plastics, combining quality and efficiency with the benefits of versatility and cost effectiveness.

Tarene 14 is a low-cost, dark, non-staining, thermoplastic oleo-resinous product having a naval stores base. The performance properties are comparable to, or superior to, pine tar. Tarene 14 finds its widest application as plasticizer, tackifier, and processing aid in rubber compounding. Other potential uses include adhesives, tar modifications, epoxy extension, coatings, mastics, and use as a low cost acid for emulsions.

Starbetter Chemical Materials Silicone Powder ST-LS100 is mainly made from high molecular weight polysiloxane. It can be used as processing additive and surface modifier for thermoplastics . It can improve the flowability and surface glossiness , reduce the friction factor.

ULTRA-LUBE™ 200 is a processing additive for most rubber compounds. It shows outstanding performance as a dispersing aid for most fillers used in rubber compounding. In injection and transfer molding ULTRA-LUBET 200 leads to faster mold filling due to its internal lubrication. An improved mold release can also be observed. ULTRA-LUBE™ 200 also works very well as an internal release agent that prevents sticking of compounds to mill rolls, calendering bowls and internal mixer rotors. ULTRA-LUBE™ 200 does not adversely interfere with most curing systems. Due to its low dosage level there is little or no effect on physical properties of the finished goods.

Natrochem CI 25 DLC-A is a coumarone-indene resin, silicon-dioxide blend widely used in rubber, adhesive, paint, coating and allied industries.

Ishihara Sangyo Kaisha Ltd. Titanium oxide MC-150 has been widely used as a carrier material for catalysts mainly used in thermal power plants, waste incinerator exhaust gas treatment equipment, automobile exhaust gas purification equipment, etc. Titanium oxide material is characterized by its strong resistance to deterioration of catalyst performance due to sulfur components in fuel, and the role of titanium oxide for catalyst carriers will continue to become more important for the conservation of the global environment.

Endex 3750™ is a 50% concentrate in a polymer carrier. It can be used in a wide range of commodity and engineering plastics, combining quality and efficiency with the benefits of versatility and cost effectiveness.

Endex 4233™ is a high efficiency pelletized concentrate, in a thermoplastic polymer carrier. It is designed for use in both commodity and engineering plastics, and may be dried with the polymer if needed. It combines its endothermic properties, quality and efficiency, with versatility and cost-effectiveness.

Tarene 40 is a low-cost, dark, non-staining, thermoplastic oleo-resinous product having a naval stores base. The performance properties are comparable or superior to pine tar. Tarene 40 finds its widest application as a plasticizer, tackifier, and processing aid in rubber compounding. Other potential uses include adhesives, tar modifications, epoxy extension, coatings, mastics, and use as a low-cost acid for emulsions.

Natrochem CI 10 DLC-A is a coumarone-indene resin, silicon-dioxide blend widely used in the rubber, adhesives, paints, coatings and allied industries.

ULTRA-LUBE™ 420 is a processing additive for applications in all elastomers. ULTRA-LUBE™ 420 provides very good lubricating effects and helps to improve flow and mold release. ULTRA-LUBE™ 420 shows excellent performance in highly filled EPDM compounds. No adverse effect on physicals is noted and its saturated structure makes it suitable for peroxide vulcanisation.

ULTRA-LUBE™ 790 is a processing additive designed as an internal lubricant for specialty polymers. Due to its low volatility, it can be used in heat resistant vulcanisates based on HNBR, ACM and FKM. ULTRA-LUBE™ 790 shows excellent lubricating properties, which leads to reduction of injection pressure in the molding process and prevents scorch. Its outstanding release effect also improves mold release and prevents sticking of compounds to rolls and rotors. ULTRA-LUBE™ 790 is very cost effective because it greatly reduces the reject rates of vulcanisates.

Endex 1020™ is a high efficiency, pelletized concentrate in a thermoplastic polymer carrier. It is designed for use in moisture sensitive engineering plastics, especially POLYCARBONATE and PET. It is intended to be used at high processing temperatures, 205 - 315°C (400 - 600°F).

Endex 4221™ is a high efficiency pelletized concentrate, in a thermoplastic polymer carrier. It is designed for use in both commodity and engineering plastics, and may be dried with the polymer if needed. It combines its endothermic properties, quality and efficiency, with versatility and cost-effectiveness.

ULTRA-LUBE™ 330 is a general processing additive in most common polymers. In highly filled compounds ULTRA-LUBE™ 330 prevents the agglomeration of filler, which leads to better uniformity of physical properties of the finished goods. This is particularly beneficial for extrusion of rubber profiles. The addition of ULTRA-LUBE™ 330 leads to faster incorporation of filler. ULTRA-LUBE™ 330 shows a positive influence on metal release, thus preventing sticking of the compounds to open mill rolls or internal mixer rotors. It also improves mold release.

Endex ABC 2750™ is a 50% concentrate in a polymer carrier. It can be used in a wide range of commodity and engineering plastics, combining quality and efficiency with the benefits of versatility and cost effectiveness.

Endex 1010™ is a high efficiency, pelletized concentrate in a thermoplastic polymer carrier. It is designed for use in moisture sensitive engineering plastics, especially POLYCARBONATE and PET. It is intended to be used at high processing temperatures, 205 - 315°C (400 - 600°F).