Products in Power, Water & Utilities: Good Thermal Stability

SuperOhm® 3450 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.

Colorable flame retardant polymeric composition in pellet form, based on EPDM rubber containing peroxide curing agent, ready for extrusion in a conventional CV extrusion line. Cables insulated with this compound are recognized for balanced properties including excellent heat, radiation, deformation resistance at high temperatures, and superior flexibility.

PFI C Flakes are offered for use in applications ranging in many applications including corrosion resistant coatings, polymer reinforcements and specialty pigments. The PFI T Flakes have been shown to increase the chemical resistance of coatings, improve the dimensional stability of moldings, and reduce surface waviness while providing a unique substrate for pigment deposition. The PFI C Flakes have the ability to be engineered in a wide range of specifications offering new and unique applications.

CoreLite PET is a cost-effective, closed-cell PET foam specially formulated to provide high mechanical properties. It is a 100% recyclable polymer foam with excellent performance. Engineered to meet the physical demands needed in high performance applications, including carrying static and dynamic loads. CoreLite PET can be used as a replacement for PVC and Honeycomb. It possesses excellent laminate-to-core bonding adhesion. Resistance to fatigue is superior, as well as its chemically stability and UV resistance. Water absorption is minimal. CoreLite PET can handle processing temperatures up to 150 °C (302 °F) . During high temperature processing it is thermally stable and no outgassing or expansion after postcure occurs. In the event of fire, no toxic gasses are generated.

PFI C Flakes are offered for use in applications ranging in many applications including corrosion resistant coatings, polymer reinforcements and specialty pigments. The PFI T Flakes have been shown to increase the chemical resistance of coatings, improve the dimensional stability of moldings, and reduce surface waviness while providing a unique substrate for pigment deposition. The PFI C Flakes have the ability to be engineered in a wide range of specifications offering new and unique applications.

CoreLite PET is a cost-effective, closed-cell PET foam specially formulated to provide high mechanical properties. It is a 100% recyclable polymer foam with excellent performance. Engineered to meet the physical demands needed in high performance applications, including carrying static and dynamic loads. CoreLite PET can be used as a replacement for PVC and Honeycomb. It possesses excellent laminate-to-core bonding adhesion.

PFI C Flakes are offered for use in applications ranging in many applications including corrosion resistant coatings, polymer reinforcements and specialty pigments. The PFI T Flakes have been shown to increase the chemical resistance of coatings, improve the dimensional stability of moldings, and reduce surface waviness while providing a unique substrate for pigment deposition. The PFI C Flakes have the ability to be engineered in a wide range of specifications offering new and unique applications.

Flamtard S (zinc stannate) is an insoluble, non-hazardous, antimony-free flame retardant synergist, and is increasingly being used in green applications, particularly in the electronics industry. It is extremely effective in PVC systems for cable sheathing, epoxy resins for printed circuit boards, polyamides and surface coatings. Flamtard S is thermally stable up to 400 °C; at higher temperatures (400 °C - 600 °C) zinc and tin ions exert catalytic activity that inhibits the radical chain reaction causing the flame.

CoreLite PET is a cost-effective, closed-cell PET foam specially formulated to provide high mechanical properties. It is a 100% recyclable polymer foam with excellent performance. Engineered to meet the physical demands needed in high performance applications, including carrying static and dynamic loads. CoreLite PET can be used as a replacement for PVC and Honeycomb. It possesses excellent laminate-to-core bonding adhesion.

PFI C Flakes are offered for use in applications ranging in many applications including corrosion resistant coatings, polymer reinforcements and specialty pigments. The PFI T Flakes have been shown to increase the chemical resistance of coatings, improve the dimensional stability of moldings, and reduce surface waviness while providing a unique substrate for pigment deposition. The PFI C Flakes have the ability to be engineered in a wide range of specifications offering new and unique applications.

CoreLite PET is a cost-effective, closed-cell PET foam specially formulated to provide high mechanical properties. It is a 100% recyclable polymer foam with excellent performance. Engineered to meet the physical demands needed in high performance applications, including carrying static and dynamic loads. CoreLite PET can be used as a replacement for PVC and Honeycomb. It possesses excellent laminate-to-core bonding adhesion.

PFI C Flakes are offered for use in applications ranging in many applications including corrosion resistant coatings, polymer reinforcements and specialty pigments. The PFI T Flakes have been shown to increase the chemical resistance of coatings, improve the dimensional stability of moldings, and reduce surface waviness while providing a unique substrate for pigment deposition. The PFI C Flakes have the ability to be engineered in a wide range of specifications offering new and unique applications.

Carbkid® Fiber VE SMC is a polymer composite material reinforced with carbon fiber, which consists of a thermoset resin (usually vinylester or epoxy) and different additives that allow to obtain certain specific characteristics and improve the behavior of the material during the molding process of the final product. While the standard SMC is reinforced with glass fibers, the CSMC is reinforced with cut fibers or carbon fabrics. CSMC materials combine the low-weight characteristics offered by carbon composites in conjunction with a widespread forming process, such as compression molding, which allows for short manufacturing cycles and is therefore suitable for industrial applications in large series.

Acetal POM H is a polyoxymethylene homopolymer. It is used in various Industry.

Verkid® SMC H154 is used in hot press, compression molding for the production of large parts with high mechanical properties and excellent surface finish. It is a glass fiber reinforced compound, in a thermoset resin matrix, with mineral fillers and different additives.

3B Fiberglass MF 01 ER are E-CR glass filaments ground to a specified density. MF 01 ER is designed to reinforce products like thermoplastics, thermoset resins, glues, coatings, and adhesives within a large range of applications and markets.MF 01 ER represents a main improvement compared to minerals when aiming for a higher stiffness and/or better impact properties in combination with specific properties, such as flow enhancement, flame retardancy, uniform isotropic shrinkage, resistance to acid environment, coating stability, etc. MF 01 ER can be collocated in between mineral fillers and most com-monly available milled fibers as it dis-plays an intermediate length/diameter aspect ratio. The product comes in a powdery form that provides both improved flowability/handling and low density.

EP GC 201 black is a glass cloth epoxy (epoxide) resin.

G-Etronax® PM GPO 3 is the composite material that does it all. G-Etronax® PM GPO 3 as an all-in-one material. This is because the carefully composed resins combined with the glass base result not only in exceptional resistance but also amazing electrotechnical properties, making G-Etronax® PM GPO 3 suitable for countless applications.

ArmaPET™ Eco95 is combines insulation and structural integrity, ensuring energy and emission efficiency for decades of use. Energy-efficient composite sandwich structures are a powerful way of saving energy and reducing CO2 emissions. Armacell is following the growing demand for high-performance insulating materials and with ArmaPET Eco it offers a foam core that optimally combines structural performance, versatility, sustainability, and long-term insulating properties.

Verkid® BMC PX4 is a fiber reinforced compound, in a thermoset resin matrix, with mineral fillers and different additives. Generally thermoset unsaturated polyester or vynil-ester resins are used as organic matrix. With the aim of enhance its characteristics and improve its transformation, other components are added: catalysts, inhibitors, thermoplastic additives, demoulding agents, thickeners and pigments.

ALTAFLUOR® 2E0 FEP ENVIRO is designed specifically for use in environmental sampling applications. This cost effective choice is the preferred product for applications requiring the purity of FEP without exposure to aggressive chemical or other harsh conditions and it does not impart taste, odor or other contaminants.

ArmaPET™ Struct FR150 is self-extinguishing version of ArmaPET Struct, we offer a structural foam core designed for applications with particularly stringent fire protection requirements.

ArmaPET™ Struct GR135 is the versatile and durable solution for structural sandwich applications, with a more environmentally responsible approach. Provides a unique combination of material and processing properties, such as durability, elevated service temperature stability and excellent compatibility with most common resins and manufacturing methods.

ArmaPET™ Struct GR320 is the versatile and durable solution for structural sandwich applications, with a more environmentally responsible approach. Provides a unique combination of material and processing properties, such as durability, elevated service temperature stability and excellent compatibility with most common resins and manufacturing methods.

SIMONA® PE 100 black 10024797 Line range of pipes and fittings with FM certification offers a superior standard of safety and quality for use in subterranean fire extinguishing systems. What is more, SIMONA® is the first plastics manufacturer worldwide to supply "FM APPROVED" pipes and fittings in sizes up to d 630 mm. It has High heat stability, UV-stabilized, creep strength at 50 years, 20°C, medium water = 10 Mpa.

ArmaPET™ Eco75 is combines insulation and structural integrity, ensuring energy and emission efficiency for decades of use. Energy-efficient composite sandwich structures are a powerful way of saving energy and reducing CO2 emissions. Armacell is following the growing demand for high-performance insulating materials and with ArmaPET Eco it offers a foam core that optimally combines structural performance, versatility, sustainability, and long-term insulating properties.

SIMONA® PE 100 black 10024775 Line range of pipes and fittings with FM certification offers a superior standard of safety and quality for use in subterranean fire extinguishing systems. What is more, SIMONA® is the first plastics manufacturer worldwide to supply "FM APPROVED" pipes and fittings in sizes up to d 630 mm. It has High heat stability, UV-stabilized, creep strength at 50 years, 20°C, medium water = 10 Mpa.

ArmaPET™ Eco65 is combines insulation and structural integrity, ensuring energy and emission efficiency for decades of use. Energy-efficient composite sandwich structures are a powerful way of saving energy and reducing CO2 emissions. Armacell is following the growing demand for high-performance insulating materials and with ArmaPET Eco it offers a foam core that optimally combines structural performance, versatility, sustainability, and long-term insulating properties.

ArmaPET™ Struct GR70 is the versatile and durable solution for structural sandwich applications, with a more environmentally responsible approach. Provides a unique combination of material and processing properties, such as durability, elevated service temperature stability and excellent compatibility with most common resins and manufacturing methods.

ArmaPET™ Struct FR70 is self-extinguishing version of ArmaPET Struct, we offer a structural foam core designed for applications with particularly stringent fire protection requirements.

ArmaPET™ Eco145 is combines insulation and structural integrity, ensuring energy and emission efficiency for decades of use. Energy-efficient composite sandwich structures are a powerful way of saving energy and reducing CO2 emissions. Armacell is following the growing demand for high-performance insulating materials and with ArmaPET Eco it offers a foam core that optimally combines structural performance, versatility, sustainability, and long-term insulating properties.

EP GC 205 is a roving cloth epoxy (epoxide) resin.

Acetal POM C GF25 is a partially crystalline thermoplastic with 25% modified glass. It is mainly used in industries.

EP GC 204 HF is a woven glass cloth epoxy (epoxide) resin.

SIMONA® PE 100 black 10024802 Line range of pipes and fittings with FM certification offers a superior standard of safety and quality for use in subterranean fire extinguishing systems. What is more, SIMONA® is the first plastics manufacturer worldwide to supply "FM APPROVED" pipes and fittings in sizes up to d 630 mm. It has High heat stability, UV-stabilized, creep strength at 50 years, 20°C, medium water = 10 Mpa.

AIREX® T10 is a closed-cell, thermoplastic and recyclable polymer foam with a very homogeneous cell structure, high mechanical properties and an outstanding price / performance ratio. It has an extraordinary resistance to fatigue, is chemically stable and has negligible water absorption. It is thermally stable during high temperature processing and post curing. T10 is designed for easy use with all resin systems and processing technologies. AIREX® T10 is ideally suited for high volume applications of lightweight sandwich structures subjected to static and dynamic loads and/or exposed to elevated temperatures during manufacturing.