Products in Other Automotive & Transportation Coatings: Solventborne...

TexMATTE 6005 is a cross-linked polymethyl methacrylate product.

S-375 is a synthetic wax with a DSC peak melt around 100°C and the corresponding low onset of melting. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

S-400-Q is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 108 – 146°C. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

NonSKID 8001 is a combination of micronized polypropylene and PTFE. Shamrock’s NonSKID micropowders provide resistance to sliding forces.

S-379-H is a synthetic wax with a DSC peak melt around 100°C and corresponding low onset of melting. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

S-483 is a spherical synthetic wax with a DSC melt peak above 110°C. It has good onset of melting and low crystallinity. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

SST®-2 is a white low MW PTFE micropowder with particle size distribution at a mean value of 8 µm. SST®-2 products are Shamrock’s PTFE micropowders that are defined by particle size and distribution, molecular weight, crystallinity, surface area, oil adsorption, powder flow, and color. Made primarily from highly controlled recycled PTFE feedstocks, SST® products are used for their ability to produce slip, nonstick, water repellency, texture, release, rub, and abrasion resistance to surfaces.

S-395-SP5 is a synthetic wax with a DSC melt peak above 120°C, good crystallinity, and the high onset of melt. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

CeraSPERSE 31 is carnauba wax compounded in Butyl Carbitol (Diethylene glycol monobutyl ether). This slow-evaporating, hydrophilic glycol ether provides compatibility with both polar and non-polar systems. Shamrock’s CeraSPERSE products are manufactured using a controlled crystallization process that allows the production of 1 micron wax dispersions. These wax compounds have a translucent appearance with a shiny gloss and a creamy feel. In addition to our standard products, Shamrock can develop and produce a wide range of compounds on a make-to-order basis.

S-395-N2 is a synthetic wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

S-NAUBA 5021 is a concentrated blend of carnauba and synthetic wax showing melting peaks ranging from 84 – 110°C. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

S-395-N5 is a synthetic wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

S-363 is a synthetic wax alloy showing melting peaks ranging from 92 – 141°C. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

S-400-N5 is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 99 – 147°C. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

FluoroSLIP® 225 is a blend of low molecular weight synthetic wax and PTFE.

S-394-N1 is a synthetic wax with a DSC melt peak above 110°C and good onset of melting. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes

Petroleum Resin C9 ES 110D it is aromatic hydrocarbon resin, light yellow to darker brown flakes, with good transparency and luster, good solubility, compatibility, aqueous stability, insulation and chemical stability, and with good adhesiveness and heat conductivity. C9 petroleum resin can manufacture transportation paint, due to its good thermal stability and weatherability, and can be applied to paper compound and plastics due to its non-saturability.

Petroleum Resin C9 ES 100M it is aromatic hydrocarbon resin, light yellow to darker brown flakes, with good transparency and luster, good solubility, compatibility, aqueous stability, insulation and chemical stability, and with good adhesiveness and heat conductivity. C9 petroleum resin can manufacture transportation paint, due to its good thermal stability and weatherability, and can be applied to paper compound and plastics due to its non-saturability.

Petroleum Resin C9 ES 120H it is aromatic hydrocarbon resin, light yellow to darker brown flakes, with good transparency and luster, good solubility, compatibility, aqueous stability, insulation and chemical stability, and with good adhesiveness and heat conductivity. C9 petroleum resin can manufacture transportation paint, due to its good thermal stability and weatherability, and can be applied to paper compound and plastics due to its non-saturability.

Slip additive for water-based coating systems. SCHWEGO mar 8305 is suitable for water borne systems such as: air drying alkyd resins, alkyd/melamine combinations, self and foreign crosslinking polyacrylic resins, polyurethanes, nitrocellulose systems, acid curing melamine and urea systems, oil-free polyesters.

At 100% active with a well-balanced surface-active capability, Teraflow® 1000 provides smoother films, allowing the application of thinner coatings, and contributes to substrate wetting, improvement of gloss, and recoat adhesion. Its novel pigment-affinic functionality, allows the formulator to optimize the dispersion of almost all pigments and extenders. It is soluble in ketones such as MEK and MIBK.

Petroleum Resin C9 ES 110 it is aromatic hydrocarbon resin, light yellow to darker brown flakes, with good transparency and luster, good solubility, compatibility, aqueous stability, insulation and chemical stability, and with good adhesiveness and heat conductivity. C9 petroleum resin can manufacture transportation paint, due to its good thermal stability and weatherability, and can be applied to paper compound and plastics due to its non-saturability.

Petroleum Resin C9 ES 140 it is aromatic hydrocarbon resin, light yellow to darker brown flakes, with good transparency and luster, good solubility, compatibility, aqueous stability, insulation and chemical stability, and with good adhesiveness and heat conductivity. C9 petroleum resin can manufacture transportation paint, due to its good thermal stability and weatherability, and can be applied to paper compound and plastics due to its non-saturability.

Petroleum Resin C9 ES 120M it is aromatic hydrocarbon resin, light yellow to darker brown flakes, with good transparency and luster, good solubility, compatibility, aqueous stability, insulation and chemical stability, and with good adhesiveness and heat conductivity. C9 petroleum resin can manufacture transportation paint, due to its good thermal stability and weatherability, and can be applied to paper compound and plastics due to its non-saturability.

Petroleum Resin C9 ES 130 it is aromatic hydrocarbon resin, light yellow to darker brown flakes, with good transparency and luster, good solubility, compatibility, aqueous stability, insulation and chemical stability, and with good adhesiveness and heat conductivity. C9 petroleum resin can manufacture transportation paint, due to its good thermal stability and weatherability, and can be applied to paper compound and plastics due to its non-saturability.

ADD-2022 is a silicone-based defoamer for solvent-based and solvent-free coating systems to prevent foam and bubble formation during paint production, filling and application. ADD-2022 can be used in coatings and printing inks.

INNORES® 24-Alkyd colorants for general industrial alkyd and polyester system

Defoamer for solvent borne and water-based coating systems, silicone free. BLISTER FREE 75 shows very good defoaming properties in solvent borne: NC-systems and NC-combinations, AC- and epoxy-systems, PU and air drying acrylic systems, BLISTER FREE 75 has very good defoaming effect in water-based coating systems based on the following binders: Long oil alkyds, Medium oil alkyds, Acrylate/medium oil alkyds, Acrylate/long oil alkyds, Epoxides.

Chempart® SC-100 is Polysaccharide Resin that uniquely processed film forming resin. It is a coactive resin which will form a hydrogen bond with alkyd and stabilize water molecules with the enamel coating. Surrounds the dispersed water droplets impeding their attraction with each other, promoting steric stabilization of the water-in-oil emulsion. During water evaporation (Chempart SC100) prevents voids and pinholes from forming in the film, and works to maintain the film's durability and performance.

US Polymers - Accurez LLC W2K 2002 is water reducible polyester polyol for 2K urethane applications to replace solvent based polyols (crosslinks with conventional isocyanates) or 100% solids isocyanate for pure solvent type performance which is mainly used in transportation/flooring/ maintenance.

Multifunctional additive with good wetting and dispersing properties for solvent-based and water borne coating systems, biodegradable. ANTIGEL is mainly used in solvent containing systems based on alkyds, alkyd/melamine, nitrocellulose combinations and polyesters. The above mentioned properties of ANTIGEL are also suitable for coating systems based on alkyds, alkyd/acrylic and other systems.

Petroleum Resin C9 ES 120D it is aromatic hydrocarbon resin, light yellow to darker brown flakes, with good transparency and luster, good solubility, compatibility, aqueous stability, insulation and chemical stability, and with good adhesiveness and heat conductivity. C9 petroleum resin can manufacture transportation paint, due to its good thermal stability and weatherability, and can be applied to paper compound and plastics due to its non-saturability.

ADD-2021 is a silicone-free defoamer with leveling properties for various solvent-based resin systems. ADD-2021 functions well during the application of paints and lacquers, and also prevents the entrapment of air during processing steps such as stirring and pumping. ADD-2021 can be used in coatings and printing inks.

Ningbo Precise Color Fast Yellow HD is a yellow pigment powder, with excellent processing stability, high transparency, excellent heat resistance and light fastness Recommend: PVC, PU, RUB, PE, PP, Fiber, EVA,etc. Also allowed to be used in PS, PC, ABS etc. You can check TDS of Pigment Yellow 138 below.

Petroleum Resin C9 ES 120 it is aromatic hydrocarbon resin, light yellow to darker brown flakes, with good transparency and luster, good solubility, compatibility, aqueous stability, insulation and chemical stability, and with good adhesiveness and heat conductivity. C9 petroleum resin can manufacture transportation paint, due to its good thermal stability and weatherability, and can be applied to paper compound and plastics due to its non-saturability.