Products in Other Additives

WACKER® EP 501 is a white, milky water-based emulsion of a phenylmethyl silicone fluid. It can be diluted with water to remove any solid content. This product is suitable for high-temperature treatments on textiles and can also be used as an additive for water-based coating systems.

Sasol Chemicals NOVEL 1216CO-7 Ethoxylate is a biodegradable nonionic based on a linear primary alcohol formulated to simulate that derived from coconut oil. This 7-mole Ethoxylate is made using Sasol Chemicals patented NOVEL technology which yields narrow range products with lower free alcohol, PEG levels and melting ranges when compared to the traditional base-catalyzed methods. NOVEL 1216CO-7 Ethoxylate is liquid at room temperature, essentially 100% active and has the following structural formula: CH3(CH2)x(OCH2CH2)7OH where 'x' varies between 11 and 15. It is used in personal care as water-soluble emulsifier. It is applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Sasol North America Inc.'s NOVEL 1412-3 Alcohol Ethoxylate is a biodegradable nonionic derived from linear primary ALFOL 1412 Alcohol. This Ethoxylate is made using Sasol North America Inc.'s patented NOVEL catalyst technology, which yields products with lower free alcohol, PEG levels, and melting ranges when compared to the traditional base-catalyzed methods. It is essentially 100% active unless diluted with water and has the following structural formula: CH3(CH2)xCH2(OCH2CH2)3OH where 'x' varies between 10 and 12. NOVEL 1412-3 Ethoxylate is a clear to slightly hazy liquid at room temperature. It is used in personal care as emulsifier, applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

LIAL 123 is primary linear and mono-branched alcohols mixture with alkyl chain length of 12 to 13 carbon atoms. For documents specific to a region, please contact Sasol using the 'Request Document' button.

LIALET 111-5,5 is a fatty alcohol polyethyleneglycol ether, based on LIAL 111 and ethylene oxide (about 5,5 moles). It is used in personal care as oil-soluble emulsifier. For documents specific to a region, please contact Sasol using the 'Request Document' button.

LIALET 111-10 is a fatty alcohol polyethyleneglycol ether, based on LIAL 111 and ethylene oxide (about 10 moles). For documents specific to a region, please contact Sasol using the 'Request Document' button.

Sasol Chemicals NOVEL TDA-150 Ethoxylate is a biodegradable nonionic derived from isotridecyl alcohol and Ethoxylated to an average of 150 moles of ethylene oxide. This Ethoxylate is made using Sasol Chemicals patented NOVEL technology which yields narrow range products with lower free alcohol, PEG levels and melting ranges when compared to the traditional base-catalyzed methods. NOVEL TDA-150 Ethoxylate is solid at room temperature and essentially 100% active. It is used in personal care as water-soluble emulsifier. It is applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

LIALET 145-8 is a fatty alcohol polyethyleneglycol ether, based on LIAL 145 and ethylene oxide (about 8 moles). For documents specific to a region, please contact Sasol using the 'Request Document' button.

LIALET 111-5 is a fatty alcohol polyethyleneglycol ether, based on LIAL 111 and ethylene oxide (about 5 moles). For documents specific to a region, please contact Sasol using the 'Request Document' button.

LIALET 111-7 is a fatty alcohol polyethyleneglycol ether, based on LIAL 111 and ethylene oxide (about 7 moles). It is used in personal care as water-soluble emulsifier, applicable for all kinds of personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

PARAFOL single cut paraffin are an excellent choice when looking for a phase change material for latent heat storage applications including functional textiles and construction. PARAFOL single cut paraffin are an alternative choice when looking for non-polar solvents, oils or wax additives based on renewable resources for environmentally friendly formulation concepts.

Gelest TETRAMETHYLTIN (SNT7560) is an epoxy alcohol rearrangement and cleavage catalyst. It functions as an intermediate and conductive agent and is commonly used in chemical production.

Keyland Polymer UV/EB resin UVP-1300 is an unsaturated polyester methacrylate resin that is cured with UV/EB energy. It is used in powder coatings, as an additive in ink, toner, and overlay varnish applications, and as an additive in 3D additive manufacturing applications.

Keyland Polymer UV/EB Resins UVE-5100 is an unsaturated epoxy acrylate resin for use in powder coatings, as an additive in ink, toner, and overlay varnish applications, and as an additive in 3D additive manufacturing applications.

Silver Coated Cenospheres uses a patented and proprietary process of wet chemistry to coat cenospheres with a thin layer of silver that allowed the finished product to perform like silver in electrical conduction and infra-red (IR) reflection AND simultaneously perform like a ceramic in thermal insulation, low cost, low maintenance and ease of use. Silver Coated Cenospheres from Ceno Technologies are extremely reflective and can exhibit an EMI shielding effectiveness of 60dB from 100 MHz to 25 GHz and higher.

ONEX MW 1002 provides a variety of chemically functionalized multi-wall carbon nanotubes for several applications in powdered form or dispersions.

SPHERES CTB150 is clean and graded cenospheres which have unusually high compressive strength and can easily handle pressures of 4,000 psi without breakage. This immense strength extends their versatility by providing increased breakage resistance during mixing, processing and application. Their light gray color consistency will always give you the results you expect, as well as delivering lower tint costs.

METabolic Explorer PDO (propanediol 1.3) is produced biologically from glycerol, a by-product of biodiesel production. It is a chemical base compound with exceptional physical qualities. Also, it is inexpensive and environment friendly. Used in coatings for sports industry.

EverSol® Blend 27 is refined tall oil pitch fraction blends used in a wide array of industrial applications.

Fortispar® K 200 is a high‐quality potassium/sodium/ calcium aluminum silicate used as a source of alumina and K2O in ceramic, paint, glass, and other applications. Carefully beneficiated using the froth flotation process, Fortispar® K offers low iron and high alkali content per unit of alumina.

Norland Products HiPure Liquid Gelatin is a specifically purified gelatin with an average molecular weight of 60,000. It is unique because, although it has the same basic chemical constituents as animal gelatin, they are in different proportions. HiPure Liquid Gelatin has lower amounts of proline and hydroxyproline, the amino acids responsible for hydrogen bonding in gelatin. This allows water solutions of our gelatin to remain liquid at room temperature, even in high concentrations.

SPHERES CTB125 is clean and graded cenospheres which have unusually high compressive strength and can easily handle pressures of 4,000 psi without breakage. This immense strength extends their versatility by providing increased breakage resistance during mixing, processing and application. Their light gray color consistency will always give you the results you expect, as well as delivering lower tint costs.

SÜDRANOL® CAR 30 is a Specially developed wax-dispersion for wood stains to modify surface properties of waterbased coatings. Other applications are in the polish industry as well as an mold release agent. Properties and advantages are Good hydrophobicity Improves polishability Improves hardness Optimizes gloss. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

SÜDRANOL® NAT 30 is aqueous emulsion to be used in wood treatment products and wood oils to optimize surface characteristics. Properties and advantages are Free of any solvents - only water based and therefore ecofriendly Very good hydrophobicity The emulsion penetrates the wood and therefore swelling of the wood is prevented. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

Fortispar® K 325 Mesh is a high‐quality potassium/sodium/ calcium aluminum silicate used as a source of alumina and K2O in ceramic, paint, glass, and other applications. Carefully beneficiated using the froth flotation process, Fortispar® K offers low iron and high alkali content per unit of alumina.

SPHERES CTB350 is clean and graded cenospheres which have unusually high compressive strength and can easily handle pressures of 4,000 psi without breakage. This immense strength extends their versatility by providing increased breakage resistance during mixing, processing and application. Their light gray color consistency will always give you the results you expect, as well as delivering lower tint costs.

TEXCOLA VA 55 is a Vinylic homopolymer in aqueous dispersion free of plasticizers and solvents.

ZINC ALLOY 600 is a high-purity zinc alloy with extremely low levels of lead.

SPHERES CTB75 is clean and graded cenospheres which have unusually high compressive strength and can easily handle pressures of 4,000 psi without breakage. This immense strength extends their versatility by providing increased breakage resistance during mixing, processing and application. Their light gray color consistency will always give you the results you expect, as well as delivering lower tint costs.

ONEX MW 1003 a variety of chemically functionalized multi-wall carbon nanotubes for several applications in powdered form or dispersions.

Because of its cationic character and the extreme polarity of Deuteron LE 50, the electric resistance of organic solvents and their mixtures is considerably reduced – even when using small quantities. Deuteron LE 50 is soluble in all common lacquer solvent mixtures, sometimes being slightly cloudy. deuteron LE 50 is a diluted version of Deuteron LE 80. back

ONEX MW 1001 provides a variety of chemically functionalized multi-wall carbon nanotubes for several applications in powdered form or dispersions.

Marcus Oil and Chemical PR700 is a hard, high melting point, low viscosity, homopolymer polyethylene wax. Consistency is maintained in 500, 000 lb batches. It is a low molecular weight polyethylene wax which comes in in liquid, pastille, flake and powder form for convenience of use.