Products in Resins & Binders: Moisture Cure

WACKER® Silicate MKS is an ethyl silicate binder suitable for the formulation of one-pack ethyl silicate zinc-rich primers. These primers are excellent anti-corrosive coatings. WACKER® Silicate MKS is a binder with outstanding anti-setting properties. Paints formulated with it are easy to stir up, even if they have been stored for a long time.

GENIOSIL® STP-E 10 is a polyether-based silane-terminated polymer suitable as a binder in moisture-curing formulations. It differs from conventional silylated polymers due to its high reactivity, which results from the structural proximity of the nitrogen atom to the silicon atom in the dimethoxy(methyl)silyl-methylcarbamate group (alpha-effect). It hydrolyzes in the presence of moisture to form a stable siloxane network initiated by mild catalysis, rather than heavy metal ions.

WACKER® Silicate S100 is a ready-to-use ethyl silicate binder with a flash point above 21°C. It is primarily used for formulating single-pack ethyl silicate zinc-rich primers, which are commonly used as anti-corrosive coatings. This product is particularly suitable for applications in marine, protective, and industrial coatings.

SILRES® BS 6920 is a silane-terminated binder that utilizes α-silane technology. It is specifically designed for the impregnation of mineral substrates or as a thin layer of coating on mineral surfaces. The formulations based on SILRES® BS 6920 are commonly used for stain-resistant impregnation and coating of various mineral substrates. These substrates can include polished or non-polished concrete floors, paving stones, clinker, bricks, and natural stone. By applying SILRES® BS 6920, the mineral surfaces become more resistant to stains and discoloration, helping to maintain their appearance and durability over time. The binder provides a protective barrier that enhances the performance and longevity of the treated mineral substrates.

GENIOSIL® XT 55 is a silane-terminated polymer suitable for use in moisture-curing formulations. It readily dissolves in standard organic solvents while being virtually insoluble in aqueous media. When used, it reacts slowly, releasing methanol and forming a resinous deposit. GENIOSIL® XT 55 finds applications in various fields such as assembly adhesives (including hybrids), building and construction adhesives, and industrial adhesives.

SILRES® BS 6921 is a silane-terminated binder based on α-silane technology for the impregnation of mineral substrates or as a thin-layer coating for mineral substrates. It can be used in combination with SILRES® BS 6920 when a softer formulation is required.

WACKER® Polymer AL 08 is a polydimethylsiloxane with dimethoxysilyl end groups. It is a colorless to yellowish, clear liquid and is not miscible with water. WACKER® Polymer AL 08 is used as a reactive polymer in formulations of moisture-reactive sealants, adhesives, and coatings (RTV-1 silicones). Applications include special raw materials for silicone compounding.

GENIOSIL® XB 502 is a silane-terminated binder based on alpha-silane technology, specifically designed for formulating high-strength adhesives. It finds applications in various areas, including building and construction adhesives, do-it-yourself projects, and industrial adhesives. One of its specific uses is for wood-to-wood bonding.

GENIOSIL® XT 50 is a silicone-modified polyether-based silane-terminated polymer suitable as a binder in moisture-curing formulations. It differs from conventional silylated polymers due to its high reactivity. This results from the structural proximity of the nitrogen atom to the silicon atom in the dimethoxy(methyl)silyl-methylcarbamate group (alpha-effect). It hydrolyzes in the presence of moisture to form a stable siloxane network initiated by mild catalysis, rather than heavy metal ions.

GENIOSIL® WP 1 is a polyether-based silane-terminated polymer suitable as a binder in moisture-curing formulations. It differs from conventional silylated polymers due to its high reactivity, which results from the structural proximity of the nitrogen atom to the silicon atom in the dimethoxy(methyl)silyl-methylcarbamate group (alpha-effect). It hydrolyzes in the presence of moisture to form a stable siloxane network initiated by mild catalysis, rather than heavy metal ions.

WACKER® Polymer AL 110 is a polydimethylsiloxane with functional groups and alcoxysilanes. It is a colorless to yellowish, clear liquid and is not miscible with water. WACKER® Polymer AL 110 is used as a raw material for the production of alkoxy-cured RTV-1 silicone rubbers. Applications include sealants and silicone sealants.

GENIOSIL® XM 25 represents a new line of silane terminated polymers that serve as reactive diluents in moisture-curing formulations. This technology encompasses the renowned Wacker portfolio. GENIOSIL® XM 25 falls under the category of gamma chemistry. It finds application in building and construction adhesives.

GENIOSIL® XM 20 represents a new line of silane terminated polymers that serve as reactive diluents in moisture-curing formulations. This technology encompasses the renowned Wacker portfolio. GENIOSIL® XM 20 falls under the category of alpha chemistry. It finds application in building and construction adhesives.

WACKER® Polymer AL 100 is a polydimethylsiloxane with dimethoxysilyl end groups. It is a colorless to yellowish, clear liquid and is not miscible with water. WACKER® Polymer AL 100 is used as a reactive polymer in formulations of moisture-reactive sealants and adhesives (RTV-1 silicones). Applications include sealants, silicone sealants, and special raw materials for silicone sealant compounding.

GENIOSIL® STP-E 35 is a polyether-based silane-terminated polymer suitable for use as a binder in moisture-curing formulations. Unlike conventional silylated polymers, it exhibits high reactivity, thanks to the trimethoxysilyl group attached to the organic backbone. In the presence of moisture, it undergoes hydrolysis and ultimately forms a stable siloxane network, which is initiated by heavy metal or strong amine catalysis.

GENIOSIL® STP-E 30 is a polyether-based silane-terminated polymer specifically designed as a binder in moisture curing formulations. It finds application in various industries including building and construction, industrial adhesives, and do-it-yourself projects. This versatile polymer is particularly suitable for building and construction adhesives, do-it-yourself projects, and flooring installations. It also serves as an effective binder in industrial adhesive formulations.

Tru-Motion™ H3219 S is a slightly faster reacting version of Tru-Motion H3168 SS. It is designed for installation at moderate temperature and humidity. Tru-Motion™ H3219 S is a 100% solids, aliphatic isocyanate based, moisture cure binder for use in construction of bonded rubber granule type running tracks, athletic and safety surfaces. Tru-Motion™ H3219 S exhibits reactivity and cure rates similar to those of MDI based binders resulting in installation and handling characteristics typical of these systems. Tru-Motion™ H3219 S exhibits excellent color fastness and exterior durability allowing use of light-colored EPDM granules without the objectionable yellowing encountered when using MDI and TDI binders. In addition, Tru-Motion™ H3219 S exhibits improved resistance to deterioration by water and pool chemicals, making it the surfacing material of choice in areas subject to water and chemical immersion

BLUEPUR T 53 provides good adhesion on different substrate. It shows good mechanical properties, high tensile strength, high elongation at break and good modulus.

BLUEPUR 2937 is an aliphatic coalescent free polyurethane dispersion formulated forparquet coatings. The special chemical structure of BLUEPUR 2937 helps the self-crosslinking of the resin and improves the performances even when used in one-component systems.

BLUEPUR 3037 is an aliphatic coalescent free polyurethane dispersion.The special chemical structure of BLUEPUR 3037 helps the self-crosslinking of the resin and improves the performances even when used in one-component systems. It is suitable for the formulations of sealers and top coat with high flexibility and for all those substrates that undergo post-forming after painting.

Tru-Motion™ H3194 is the slowest reacting aliphatic binder in the Tru-Motion aliphatic series. It is designed for installation at high temperature and high humidity. Tru-Motion H3194 is a 100% solids, aliphatic isocyanate based, moisture cure binder for use in construction of bonded rubber granule type running tracks, athletic and safety surfaces. Tru-Motion™ H3194 exhibits reactivity and cure rates similar to those of MDI based binders resulting in installation and handling characteristics typical of these systems. Tru-Motion™ H3194 exhibits excellent color fastness and exterior durability allowing the use of light-colored EPDM granules without the objectionable yellowing encountered when using MDI and TDI binders. In addition, Tru-Motion™ H3194 exhibits improved resistance to deterioration by water and pool chemicals, making it the surfacing material of choice in areas subject to water and chemical immersion.

Tru-Motion™ H3725 is a slow reacting Aromatic binder. It is designed for installation at higher temperatures and humidity. Tru-Motion™ H3725 is a 100% solids, TDI free, moisture cure polyurethane binder for use in the construction of bonded rubber granule type athletic and safety surfaces. Tru-Motion™ H3725 is TDI (Toluene Diisocyanate) free, eliminating the regulatory and construction site safety hazards associated with TDI containing systems.

RISUN 30000T is trimethoxy silane terminated polyether polymer.

Tru-Motion™ H3168 is a 100% solids, aliphatic isocyanate based, moisture cure binder for use in construction of bonded rubber granule type running tracks, athletic and safety surfaces. Tru-Motion H3168 exhibits reactivity and cure rates similar to those of MDI-based binders, resulting in installation and handling characteristics typical of these systems. Tru-Motion™ H3168 exhibits excellent color fastness and exterior durability allowing the use of light-colored EPDM granules without the objectionable yellowing encountered when using MDI and TDI binders. In addition, Tru-Motion™ H3168 exhibits improved resistance to deterioration by water and pool chemicals, making it the surfacing material of choice in areas subject to water and chemical immersion.

Tru-Motion™ H3617 is the fastest reacting aliphatic binder in the Tru-Motion aliphatic series. It is designed for installation at low temperature and low humidity. Tru-Motion H3617 is not appropriate for use at high temperatures. Tru-Motion H3617 exhibits excellent color fastness and exterior durability allowing the use of light-colored EPDM granules without the objectionable yellowing encountered when using MDI and TDI binders. In addition, Tru-Motion H3617 exhibits improved resistance to deterioration by water and pool chemicals, making it the surfacing material of choice in areas subject to water and chemical immersion.

KERILON® 201S is trimethoxy silane terminated polyether polymer. It could be applied in moisture curing elastic sealant, elastic structure sealant and sealing coatings.

Genesee Polymers' GP-179 SILICONE RESIN is a 100% active ethoxy-functional methyl silicone resin, which is suggested for evaluation, as a reactive intermediate, in the synthesis of silicone-organic copolymers for protective coatings.GP-179 will slowly undergo hydrolysis and condensation to a cured resin film when exposed to atmospheric moisture, providing a water repellent protective coating for wood, masonry and metal substrates.When required, GP-179 SILICONE RESIN may be diluted with aliphatic or aromatic hydrocarbon solvents, or with dry alcohols, esters or other solvents.

Melos PC 31-010 is a solvent-free, single-component MDI-based polyurethane binder. It cures with moisture and is designed for the production of elastic rubber granule base layers for sports surfaces. It shows an excellent adhesion to SBR and EPDM rubber.

RISUN 12000DS is dimethoxysilane and triethoxysilane mixed-terminated polyether polymer.

Tru-Motion™ H3609 is a 100% solids, aliphatic isocyanate based, moisture cure binder for use in the construction of Aquatic Surfaces using polyolefin granules. Tru-Motion™ H3609 exhibits excellent color fastness and exterior durability allowing use of light-colored polyolefin granules without the objectionable yellowing encountered when using MDI and TDI binders.

Melos PC 31-050 is a one component, solvent less MDI/TDI-based prepolymer with low viscosity. PC 31-050 has a long processing time, so it is possible to build acceptable installation seams even a few hours later. PC 31-050 is used particularly as a binding agent in the production of E-layer. PC 31-050 cures under the influence of moisture.

KERILON® 12000DS-A is dimethoxysilane and triethoxysilane mixed-terminated polyether polymer.

RISUN 12000E is triethoxysilane terminated polyether polymer. It could be applied in moisture curing elastic sealant, elastic structure sealant and sealing coatings.

BLUEPUR 3080 is an aliphatic coalescent free polyurethane dispersion.Thanks to the special chemical structure, BLUEPUR 3080 doesn't require the use of any coalescence into the formulation. This product is for high-elasticity 1K and 2K coatings.

Tru-Motion™ H3723 is designed for installations at high temperatures and humidity. Tru-Motion™ H3723 is a 100% solids, TDI free, moisture cure polyurethane binder for use in the construction of bonded rubber granule type athletic and safety surfaces. Tru-Motion™ H3723 is TDI (Toluene Diisocyanate) free, eliminating the regulatory and construction site safety hazards associated with TDI containing systems.

UCOPOL OL 17/60 WD is recommended for the formulation of DIY matt and glossy wood varnishes for outdoor frames and marine and industrial environment resistant coatings. UCOPOL OL 17/60 WD cures with oxypolimerization and the main propierties are fastcuring, hardness abrasion resistance significantly higher than alkyd resins. UCOPOL OL 17/60 WD has good weather resistance and, due to its low acid value, it is very stable with anticorrosive pigments and metallic powders.