Products in Monomers & Oligomers

PTMG 650 is a member of the glycol ether chemical family, is identified as Polytetrahydrofuran. It is available in drums, tanks, and cans, providing flexibility in packaging and storage. PTMG 650 is characterized by its hygroscopic nature and solid physical form.

ADM Sorbitol Solution 70%, USP/FCC, is a clear, colorless, and odorless aqueous solution containing about 71% total solids consisting essentially of D-Sorbitol with a small amount of mannitol and other polyhydric alcohols. It is a superior humectant in a wide range of products, including confections, cosmetics, and certain beverages and foods. Because of its sweet but non-cariogenic nature, it is used in sugar free foods, dentifrices, and pharmaceuticals. It is also used as a plasticizer, stabilizer and as a raw material in the manufacture of sorbitan esters/polysorbates and polyurethanes.

NORYL™ AP2001G polyol is a low molecular weight di-functional hydroxyl-terminated polyol based on polyphenylene ether (PPE). The incorporation of NORYL AP2001G polyol into a solid elastomer matrix may demonstrate structure-property benefits in traditional CAST polyurethane material formulations. Incorporating NORYL AP2001G polyol into these systems may: - Improve toughness and reduce abrasion - Increase tensile strength - Improve strain modulus and elongation - Maintain physical properties at elevated temperatures and after humid aging - Improve resistance to alkaline, acid, water and oil - Improve adhesion to steel This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

2 - Phenyl 3,3' Bis (4-Hydroxy Phenyl) Phthalimide: SABIC PPPBP-1000 is available globally and at commercial scale. With a unique property profile, including reactivity, chemical functionality and high purity, potential uses include building blocks for epoxies and other phenolic chemistries. Compared to other common bisphenols, it can significantly enhance glass transition temperatures and lower shrinkage.

Caprolactam is used in a variety of applications worldwide. As one the largest and most experienced suppliers of merchant-grade caprolactam, AdvanSix offers industry-leading quality, consistency and reliability of supply.

Alpha methylstyrene (AMS), also known as isopropyl benzene, is used as an intermediate in the production of acrylonitrile butadiene styrene (ABS), acrylic resins, adhesives, paints and coatings. AdvanSix is the largest AMS producer in the U.S., and meets the highest purity product requirements for key industry segments. AdvanSix offers customers a variety of shipping options, including rail cars, bulk tank trucks, iso containers, and bulk marine. Applications include:Building & ConstructionAdhesives, sealants and caulks.Automotive & Transportation Electrical and electronic systems, exterior and body parts, interior parts and lighting, tires, sealants for bonding and assembly applications, and aerospace and automotive lubricants and functional fluids.Adhesives & Sealants Construction adhesives, sealants and caulks and DIY repair adhesives.Printing & PackagingPaper and packaging bookbinding, case and carton sealing, flexible packaging, rigid packaging, labeling, reseal and reclosure, tapes, labels, graphic adhesives, coatings for cans, film, foil, sheets, and overprint varnishes, flexible food films, form fill seal packaging, and for digital, electrophotography and electrostatic, flexography and gravure printing.Paints & Coatings Industrial coil and metal coatings.Electrical & Electronics Devices and assemblies for consumer and automotive electronics, and parts and components for housing and enclosure applications.Home & Personal Care Feminine hygiene applications and adult incontinence and baby diapers.Pharmaceuticals & HealthcareDisposable nonwovens.

A clear liquid polymer soluble in water, LIPOXOL 300 MED is produced by the addition of ethylene oxide to ethylene glycol. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Sasol is a supplier of n-Butyl acrylate that has a mass purity of 99.5 %. Butyl Acrylate is a liquid that is clear and colorless with a sharp distinctive odor. A versatile monomer which provides performance characteristics in polymer formulations for latex and solution co-polymers, copolymer plastics and crosslinkable polymer systems. Major markets include surface coatings, textiles, adhesives and plastics. For documents specific to a region, please contact Sasol using the 'Request Document' button.

LIPOXOL 4000 powder is a PEG 4000 belonging to Sasol's PEG range of products For documents specific to a region, please contact Sasol using the 'Request Document' button.

LIPOXOL 3350 MED flakes is a Medical Grade Polyethylene Glycol belonging to Sasol's PEG range of products. It is a combination with LIPOXOL 3350 MED powder under LIPOXOL 3350 MED For documents specific to a region, please contact Sasol using the 'Request Document' button.

LIPOXOL 8000 MED powder is a Medical Grade Polyethylene Glycol belonging to Sasol's PEG range of products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

LIPOXOL 8000 MED flakes is a Medical Grade Polyethylene Glycol belonging to Sasol's PEG range of products.It is a combination with LIPOXOL 8000 MED Powder under LIPOXOL 8000 MED For documents specific to a region, please contact Sasol using the 'Request Document' button.

LIPOXOL 6000 MED powder is a Medical Grade Polyethylene Glycol belonging to Sasol's PEG range of products For documents specific to a region, please contact Sasol using the 'Request Document' button.

DIONIL 18R is an Diol belonging to Sasol's Single Cut range of products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Depending of the molecular weight the LIPOXOL MED grades are liquid or solid polymers soluble in water. They are produced by the addition of ethylene oxide to ethylene glycol. For documents specific to a region, please contact Sasol using the 'Request Document' button.

LIPOXOL 6000 powder is a PEG 6000 belonging to Sasol's PEG range of products For documents specific to a region, please contact Sasol using the 'Request Document' button.

SLOVANIK 2010 is an EO PO Copolymer belonging to Sasol's PAG range of products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Ethylene glycol with a purity of min. 99%. For documents specific to a region, please contact Sasol using the 'Request Document' button.

LIPOXOL 3000 flakes is a PEG 3000 belonging to Sasol's PEG range of products For documents specific to a region, please contact Sasol using the 'Request Document' button.

Hexene has widespread use in a variety of formulations, at industrial sites and also in manufacturing of chemicals. Primarily, it is used in the production of polyethylene. For documents specific to a region, please contact Sasol using the 'Request Document' button.

SLOVANIK 3070/7 is an EO PO Copolymer belonging to Sasol's PAG range of products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Sasol's Ethyl Acrylate has a mass purity of 99.5 %. A versatile monomer to provide performance characteristics to polymer formulations for latex and solution copolymers, copolymer plastics and cross-linkable polymer systems. Major markets include surface coatings, textiles, adhesives and plastics. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Diethylene glycol (DEG) with a purity of min. 99%. For documents specific to a region, please contact Sasol using the 'Request Document' button.

LIPOXOL 3350 MED SP is a Medical Grade Polyethylene Glycol belonging to Sasol's PEG range of products For documents specific to a region, please contact Sasol using the 'Request Document' button.

LIPOXOL 8000 flakes is a PEG 8000 belonging to Sasol's PEG range of products For documents specific to a region, please contact Sasol using the 'Request Document' button.

LIPOXOL 1000 is a PEG 1000 belonging to Sasol's PEG range of products For documents specific to a region, please contact Sasol using the 'Request Document' button.

LIPOXOL 6000 flakes is a PEG 6000 belonging to Sasol's PEG range of products For documents specific to a region, please contact Sasol using the 'Request Document' button.

LIPOXOL 4000 MED SP is a Medical Grade Polyethylene Glycol belonging to Sasol's PEG range of products For documents specific to a region, please contact Sasol using the 'Request Document' button.

MEG is an Monoethylene Glycol belonging to Sasol's Ethylene Glycol range of products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

LIPOXOL 4000 MED flakes is a Medical Grade Polyethylene Glycol belonging to Sasol's PEG range of products. It is a combination with LIPOXOL 4000 MED Powder under LIPOXOL 4000 MED For documents specific to a region, please contact Sasol using the 'Request Document' button.

Pent-1-ene is used in the chemical manufacture. Sasol, who is the only manufacture of 1-Pentene manufactures it by Fischer-Tropsch Process. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Depending of the molecular weight the LIPOXOL 4000 MED powder is polymers soluble in water. It is produced by the addition of ethylene oxide to ethylene glycol(under alkaline conditions and neutralized with lactic acid) For documents specific to a region, please contact Sasol using the 'Request Document' button.

LIPOXOL 2000 is a PEG 2000 belonging to Sasol's PEG range of products For documents specific to a region, please contact Sasol using the 'Request Document' button.

Triethylene glycol (TEG) with a purity of min. 97% belonging to Sasol's Ethylene Glycol range of products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Depending of the molecular weight the Lipoxol 1000 MED is solid polymers soluble in water. It is produced by the addition of ethylene oxide to ethylene glycol. For documents specific to a region, please contact Sasol using the 'Request Document' button.

LIPOXOL 6000 MED flakes is a Medical Grade Polyethylene Glycol belonging to Sasol's PEG range of products.It is a combination with LIPOXOL 6000 MED Powder under LIPOXOL 6000 MED. For documents specific to a region, please contact Sasol using the 'Request Document' button.