Products in Elastomers: Processing Aid

MultiTech MultiFunctional U is our recycling additive for polyolefins MultiTech MultiFunctional U recycling additives improve the polyolefin recycling processes and help recyclers to produce higher value polyolefine recyclates for long term applications. For the first time the new repairing technology allows to repair damages from prior use. MultiTech MultiFunctional U for Upcycling of post-industrial and post-consumer polypropylene waste streams: Repair of damage in the polymer chains by novel chemical system. High quality recyclates for demanding long term applications Prolonged retention of mechanical properties during long term heat aging. One-Pack solution stabilizes the recycling process

MultiTech MultiFunctional T is a recycling additive for polyolefines. It is used for upcycling Polypropylene from car battery cases: Repair of damage in the polymer chains by a novel chemical system. High-quality recyclates for demanding long-term applications Prolonged retention of mechanical properties during long-term heat aging. Neutralization of acidic contaminations. One-Pack solution stabilizes the recycling process. MultiTech MultiFunctional T recycling additives improve the polyolefin recycling processes and help recyclers to produce higher-value polyolefine recyclates for long-term applications. For the first time, the new repairing technology allows repairing damages from prior use.

MultiTech Multifunctional C is the vegetable oil obtained from the seed of the castor tree œRicinus communis It contains a major amount of hydroxy acid.

ELASTOSIL® AUX FL Non-Healing is a ready-to-use masterbatch comprising specific additives and reactive silicone polymers that are commonly used in ELASTOSIL® liquid silicone rubber. This ensures homogeneous covulcanization without migration, as may be observed for systems based on silicone oil. It can be used to reduce self-healing and other sticking phenomena.

SIPERNAT® 50 S is a hydrophilic, finely milled silica. Besides its application as flow aid and highly effective anticaking agent it also may serve as carrier of especially high absorptive capacity in case particle fineness is required.

AEROSIL® R 8200 is a structure modified hydrophobic silica grade treated with HMDS (Hexamethyldisilazane). It is characterized by an extremely low thickening effect and high compacted bulk density. Its high hydrophobicity makes it suitable as a defoamer silica.

AEROSIL® R 972 is hydrophobic fumed silica grade treated with DDS (Dichlordimethylsilane). The moderate hydrophobicity of these AEROSIL® products is suited for defoaming properties in the presence of appropriate hydrophobic liquids. They are recomended for improving the sedimentation stability of defoamer dispersions as well.

TEGO® Antifoam KS 95 is a self-emulsifying organic antifoam concentrate enhanced with minor amounts of organo-siloxanes for improved efficiency. This antifoam is well-suited for industrial applications, specifically as an anti-foaming agent, and finds utility in various processes including polymerization, wastewater treatment, and suspension polymerization.

AEROSIL® OX 50 is a fumed silica with a very low specific surface area, low thickening, and high purity. The product can be used as an additive or as a raw material. In polymer composites, high filler loading can be achieved, making it possible to control essential characteristics of polymers.

TEGO® Antifoam 1488 is a versatile emulsion-based anti-foaming agent tailored for various applications. It effectively controls foam formation in processes like emulsion polymerization and textile sizing. With good compatibility, it finds use in diverse industrial additives, including metalworking fluids and nonwovens. This emulsion-type additive is available in drums, catering to different production scales. Its performance spans markets like adhesives and sealants, fluids and lubricants, and building materials. TEGO® Antifoam 1488's role in polymer dispersions manufacturing adds to its versatility and value.

METABLEN™ A 3000 is an acrylic-modified polytetrafluoroethylene (PTFE) used in vacuum molding, foam molding, blow molding and profiling. It improves the melt tension that is required in these processing methods by minimizing increases in melt viscosity, without sacrificing the inherent properties of thermoplastics.BenefitsIncreases melt tension of a resinMaintains fluidityEnhances die swellImproves the flexural modulus, heat deformation temperature, and other properties of polypropyleneAnti-drip effect with flame-retardant resinsImproves filler dispersibilityBetter surface appearanceIncreases foam expansion ratioApplicationsAutomotiveConsumer goodsElectric and electronics*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

GENIOPLAST® Pellet 345 is a soft, highly transparent, thermoplastic elastomeric silicone copolymer. It serves as a processing aid for plastics processing, acting as a polymer additive to improve flow and mechanical properties. Additionally, it functions as a slip additive for bi-oriented Polypropylene films (BOPP).

Gelest (HYDROXYPROPYLENEOXYPROPYL)METHYLSILOXANE - DIMETHYLSILOXANE COPOLYMER, 150-200 cSt (CMS-222) functions as a lubricant, processing aid, and surfactant.

Gelest CARBINOL (HYDROXYL) TERMINATED POLYDIMETHYLSILOXANE, 110-140 cSt (DMS-C21) functions as a lubricant, processing aid, and surfactant. This product is commonly used in chemical production.

MarTofa - Tall Oil Fatty Acid (TOFA), also known as liquid rosin, has a high fatty acid content and a low content of rosin acids and unsaponifiables. It’s an all-natural, eco-friendly product and is a part of the Oleic Acid family. MarTofa - Tall Oil Fatty Acid (TOFA) has a wide range of uses including as a raw oil for surfactants and lubricants, oil-field chemicals, metalworking properties, and rubber processing aids.

Artic Mist is an off-white, high-purity, extremely platy, very fine talc serving polymer, rubber, and coatings applications. Artic Mist® is recommended for excellent stiffness, HDT, and dimensional stability, as well as improved impact strength and esthetics in high-performance plastics, plastic nucleation, foamed plastics, plastic films, and wire and cable applications.

Calford® WB is an ethylene bis stearamide (EBS) wax (C38H76O2N2) in beaded (WB) form, produced using vegetable based stearic acid. It is primarily used as an internal and external lubricant for polymers such as polyethylene, polypropylene, ABS, polystirene, PVC, and phenols. It can also be used in coating and ink applications as dispersants and matting agents.

Calford® WP is an ethylene bis stearamide (EBS) wax (C38H76O2N2) in powder (WP) form, produced using vegetable-based stearic acid. It is primarily used as an internal and external lubricant for polymers such as polyethylene, polypropylene, ABS, polystirene, PVC, and phenols. It can also be used in coating and ink applications as dispersants and matting agents.

Naxonac® T50A is an ammonium salt that offers corrosion inhibition, heat and light stability, and clarity for use in films. It is widely used in acrylic, styrene acrylic, and vinyl acrylic latex syntheses. This versatile product provides a stable, high-quality finish for industrial applications.

Micro Powders Inc MPP-230F is Economical grade of micronized polyethylene wax for abrasion resistance and slip.

Polyfluo® 190S is a unique, high performance composite of low density polyethylene and PTFE for maximum abrasion and burnish resistance with superior surface durability.Features and Benefits High performance product for improving surface abrasion resistance and film toughness Synergistic wax combination that enhances PTFE mobility to the coating surface Low density polyethylene provides superior surface toughness, durability and mar resistance PTFE dramatically enhances abrasion resistance, antiblocking and film hardness Conforms to (EU) 2017/1000

Propyltex® 325S is Micronized polypropylene for reducing gloss and adding consistent surface texture and structure to a wide variety of paints and coatings.Features and Benefits Provides gloss reduction with improved burnish resistance vs. silica Adds a mild texture effect to the coating surface Tough, high molecular weight polypropylene gives good durability Does not lower COF; ideal for non-skid surfaces Narrow cut mean particle size grade available for maximum texture control For a finer texture, try PropylMatte 31

Superslip™ 6515AL is a highly engineered HDPE/amide wax/alumina nanocomposite for maximum scratch, scuff and block resistance.Features and Benefits Maximum scratch resistance; equal to PE/PTFE additives HDPE/amide wax composite reinforced with 300 nm aluminum oxide nanoparticles (Mohs Hardness 9) Good abrasion resistance with slip and lubricity Amide wax component provides excellent antiblocking and release properties Ideal for can and container coatings; 21CFR 175.300 approved Compare to Superslip 6515XF

PolyGlide® 1226XF is a highly engineered HDPE/ceramic/nanoceramic composite for abrasion resistance and lubricity.Features and Benefits HDPE composite reinforced with hard, inert ceramic microspheres and nanoceramic platelets Improved Taber abrasion resistance when compared to PE/PTFE additives Provides slip and lubricity Ideal for can and container coatings; 21CFR 175.300 approved Effective replacement for PTFE additives Compare to (coarser) Polyfluo 900

Polyfluo® 540XF is a wax/ PTFE combination for surface lubricity with scratch and abrasion resistance.Features and Benefits High performance product for adding slip and abrasion resistance Synergistic wax combination that enhances PTFE mobility to the coating surface PTFE dramatically enhances abrasion resistance Wax component provides improved surface slip Easy to disperse fine powder that can be incorporated with high speed mixing

Micro Powders Inc MPP-611AL is a highly engineered HDPE/alumina nanocomposite for unsurpassed scratch and scuff resistance.Features and Benefits Maximum scratch and scuff resistance with slip and lubricity HDPE composite reinforced with 300 nm aluminum oxide nanoparticles (Mohs Hardness 9) Easier-to-disperse nanotechnology in a safe, non- nano powder Composite particle density maximizes efficiency and minimizes settling Effective replacement for PTFE additives Easier-to-disperse nanotechnology in a safe, non- nano powder

Polyfluo® 523XF is a unique extra fine, high performance composite of polyethylene and PTFE for superior surface lubricity with scratch and abrasion resistance.Features and Benefits High performance product for adding slip, scratch and abrasion resistance Synergistic wax combination that enhances PTFE mobility to the coating surface PTFE dramatically enhances abrasion resistance High density polyethylene provides improved surface slip Extra fine particle size provides excellent gloss retention and film clarity

Polyfluo® 200A is high performance combination of high slip polyethylene and PTFE for surface lubricity with scratch and abrasion resistance.Features and Benefits High performance product for adding slip and abrasion resistance Synergistic wax combination that enhances PTFE mobility to the coating surface High slip polyethylene provides excellent surface lubricity PTFE dramatically enhances abrasion resistance

PropylMatte 31 is Finely micronized densified polypropylene for consistent matting and gloss control with superior in- can stability in water-based paints, coatings and inks.Features and Benefits Efficient gloss reduction from satin to matte finish Improves burnish resistance vs. silica mattifiers Particle density optimized to essentially eliminate flotation or settling in most water based systems Imparts non-slip properties For more efficient matting with a fine microtexture, try PropylTex 325HD/270HD

Polyfluo® 190A is unique, high performance composite of low density polyethylene and PTFE for maximum abrasion and burnish resistance with superior surface durability.Features and Benefits High performance product for improving surface abrasion resistance and film toughness Synergistic wax combination that enhances PTFE mobility to the coating surface Low density polyethylene provides superior surface toughness, durability and mar resistance PTFE dramatically enhances abrasion resistance, antiblocking and film hardness Conforms to (EU) 2017/1000

Polyfluo® 535 is An economical wax/PTFE combination for surface lubricity with scratch and abrasion resistance.Features and Benefits High performance product for adding slip, scratch and abrasion resistance Synergistic wax combination that enhances PTFE mobility to the coating surface PTFE dramatically enhances abrasion resistance Wax component provides improved surface slip Easy to disperse fine powder that can be incorporated with high speed mixing

Polyfluo® 523AL ia A highly engineered HDPE/PTFE/alumina nanocomposite for unsurpassed scratch and scuff resistance.Features and Benefits Maximum scratch and scuff resistance with slip and lubricity HDPE/PTFE composite reinforced with 300 nm aluminum oxide nanoparticles (Mohs Hardness 9) Easier-to-disperse nanotechnology in a safe, non- nano powder Composite particle density maximizes efficiency and minimizes settling Extra fine particle size provides excellent gloss retention and film clarity Composite wax/alumina particle is less abrasive on processing equipment compared to free alumina

Propyltex® 270S-1518 is Micronized polypropylene for reducing gloss and adding consistent surface texture and structure to a wide variety of paints and coatings.Features and Benefits Provides gloss reduction with improved burnish resistance vs. silica Adds a mild texture effect to the coating surface Tough, high molecular weight polypropylene gives good durability Does not lower COF; ideal for non-skid surfaces Narrow cut mean particle size grades available for maximum texture control Adds texture in low bake (Low E) powder coatings

Polyfluo® 380A is high performance wax/PTFE combination for improved surface lubricity with scratch resistance.Features and Benefits High performance product for adding slip and abrasion resistance Synergistic wax combination that enhances PTFE mobility to the coating surface High slip wax provides excellent surface lubricity PTFE dramatically enhances abrasion resistance

NatureFine H325 is Finely micronized hydrogenated castor oil for use in industrial coatings and agrochemical products.Features and Benefits Naturally derived wax Adds slip, lubricity and rub resistance to industrial and graphic arts coatings Biodegradable to OECD 302C test standard Adds hydroxyl functionality (>155) Effective dry powder binding agent Microplastic alternative

TRIEST EHC-0611, is a hydrophobic and highly biodegradable saturated fatty acid ester formed by the reaction of 2-Ethylhexly alchol with coco fatty acid a biobased fatty acid. It has applications in many areas like cosmetics industry, adhesives, textile auxiliary chemicals, polymers industry.