Products in Elastomers: Profile Extrusion

MultiTech MultiFunctional U is our recycling additive for polyolefins MultiTech MultiFunctional U recycling additives improve the polyolefin recycling processes and help recyclers to produce higher value polyolefine recyclates for long term applications. For the first time the new repairing technology allows to repair damages from prior use. MultiTech MultiFunctional U for Upcycling of post-industrial and post-consumer polypropylene waste streams: Repair of damage in the polymer chains by novel chemical system. High quality recyclates for demanding long term applications Prolonged retention of mechanical properties during long term heat aging. One-Pack solution stabilizes the recycling process

MultiTech MultiFunctional T is a recycling additive for polyolefines. It is used for upcycling Polypropylene from car battery cases: Repair of damage in the polymer chains by a novel chemical system. High-quality recyclates for demanding long-term applications Prolonged retention of mechanical properties during long-term heat aging. Neutralization of acidic contaminations. One-Pack solution stabilizes the recycling process. MultiTech MultiFunctional T recycling additives improve the polyolefin recycling processes and help recyclers to produce higher-value polyolefine recyclates for long-term applications. For the first time, the new repairing technology allows repairing damages from prior use.

Espolex® 4832 is a recyclable TPV that combines thermoplastic processing capabilities with rubber-like behavior. It demonstrates excellent processability in extrusion, calendar, and blow molding processes, while also exhibiting low die drool during extrusion.   Applications: Automotive interior skin Sheets Tubes Film/skins/foils Hoses Profiles Body seals/weather stripping   Features: Low die drool Rubber-like elasticity and feel   Benefits: Recyclable Soft touch feeling

Espolex® WT361 is a thermoplastic elastomer with low die drool. It is a recyclable TPV that processes like a thermoplastic and acts like rubber. It is used in films, skins, foils, body seals, weatherstripping, hoses, tubes, and profile extrusion. This product is suitable for Extrusion.   Applications: Large components Appliances Automotive Interior Trim Boat Jet-propelled Vehicle   Features: Airbag Covers Interior Trim Handle Grips   Benefits: Excellent Low Temperature Ductility

METABLEN™ A 3000 is an acrylic-modified polytetrafluoroethylene (PTFE) used in vacuum molding, foam molding, blow molding and profiling. It improves the melt tension that is required in these processing methods by minimizing increases in melt viscosity, without sacrificing the inherent properties of thermoplastics.BenefitsIncreases melt tension of a resinMaintains fluidityEnhances die swellImproves the flexural modulus, heat deformation temperature, and other properties of polypropyleneAnti-drip effect with flame-retardant resinsImproves filler dispersibilityBetter surface appearanceIncreases foam expansion ratioApplicationsAutomotiveConsumer goodsElectric and electronics*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

ECP 280 is a magnetic compound based on special blends of magnetic additive compounded into TPE in such a way as to optimize physical and magnetic properties during processing. Normally supplied blue.

BRUGGOLEN® TP-R2090 is our recycling additive for polyolefins Bruggolen® R recycling additives improve the polyolefin recycling processes and help recyclers to produce higher value polyolefine recyclates for long term applications. For the first time the new repairing technology allows to repair damages from prior use. BRUGGOLEN® TP-R2090 for Upcycling of post-industrial and post-consumer polypropylene waste streams: Repair of damage in the polymer chains by novel chemical system. High quality recyclates for demanding long term applications Prolonged retention of mechanical properties during long term heat aging. One-Pack solution stabilizes the recycling process

Terratek® FX2200 is a unique elastomeric bioplastic with a diverse range of potential applications. This material is suitable for injection molding, profile extrusion, and sheet extrusion.

BRUGGOLEN® Recycling R8895 is a recycling additive for polyolefines. It is used for upcycling Polypropylene from car battery cases: Repair of damage in the polymer chains by a novel chemical system. High-quality recyclates for demanding long-term applications Prolonged retention of mechanical properties during long-term heat aging. Neutralization of acidic contaminations. One-Pack solution stabilizes the recycling process. Bruggolen® R recycling additives improve the polyolefin recycling processes and help recyclers to produce higher-value polyolefine recyclates for long-term applications. For the first time, the new repairing technology allows repairing damages from prior use.

The Addisil™ 2080 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80 Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits Good transparency, no yellowing Good mechanical performance Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf life of 6 months for the single components if stored appropriatelyM Very long pot life of 2 to 4 weeks for the mixed components Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations KTW: German Water Regulation. A representative sample has passed the test for tubes, fittings, seals and strorage systems (cold and warm) WRAS (BS 6920). A representative sample has passed the test (cold and warm) W270: Microbiological growth test. A representative sample has passed the test.

Lucolit® 1321 by Lucobit AG is comprised of Polyethylene Copolymer and Thermoplastic Polyolefin Elastomer. It is commonly used It is available in Granules form.

The Addisil™ 442 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf-life of 6 months for the single component if stored appropriately Very long pot life of 2 to 4 weeks for the mixed components.

ADD-PA 321 is flow aids copolymers which are produced with an ACR monomers with latex. These flow aids represent high molecular weight products, which are mounted on a multilayer structure.

A High Ethylene Polymer with Good Green Strength for Wire and Cable and Extruded Profiles

Purgex™ 459 Plus commercial purging compound is a ready-to-use blend consisting of active ingredients with a polyethylene carrier. Purgex products have mechanical activity for efficient cleaning, foaming action for enhanced mixing and a lubricant for easy removal. Purgex 459 is an ideal purging compound for tough resins.

An Excellent Polymer for Heat Resistant Thermoset Applications and TPO Products

The Addisil™ 480 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months from date of manufacture.

An Ultra Fast Curing Polymer for Sponge and Dense Extrusions

Lucolit® 1322 by Lucobit AG is comprised of Polyethylene Copolymer and Thermoplastic Polyolefin Elastomer. It is commonly used It is available in Granules form.

A High Performance Sponge Polymer

The Addisil™ IND 2050 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80 Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits Good transparency, no yellowing Good mechanical performance Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf life of 6 months for the single components if stored appropriatelyM Very long pot life of 2 to 4 weeks for the mixed components Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations.

An Excellent Polymer for Hose and Extruded ProfilesUnique Features Fast Curing Excellent extrusion properties: low die swell, high extrusion rate High green strength, excellent shape stability Friable bale provides excellent dispersion Highly extendable Good low temperature properties Applications Extruded Profiles Hose Molded Products

The Addisil™ 452 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf-life of 6 months for the single component if stored appropriately Very long pot life of 2 to 4 weeks for the mixed components.

Addisil™ 2060 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80 Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits Good transparency, no yellowing Good mechanical performance Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf life of 6 months for the single components if stored appropriatelyM Very long pot life of 2 to 4 weeks for the mixed components Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations KTW: German Water Regulation. A representative sample has passed the test for tubes, fittings, seals and strorage systems (cold and warm) WRAS (BS 6920). A representative sample has passed the test (cold and warm) W270: Microbiological growth test. A representative sample has passed the test.

Addisil™ 2050 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80 Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits Good transparency, no yellowing Good mechanical performance Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf life of 6 months for the single components if stored appropriatelyM Very long pot life of 2 to 4 weeks for the mixed components Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations KTW: German Water Regulation. A representative sample has passed the test for tubes, fittings, seals and strorage systems (cold and warm) WRAS (BS 6920). A representative sample has passed the test (cold and warm) W270: Microbiological growth test. A representative sample has passed the test.

Lucofin® 1454 by Lucobit AG is comprised of Polyethylene Copolymer and Thermoplastic Polyolefin Elastomer. It is commonly used It is available in Granules form.

Birch Plastics BirCom AM05 is the active antimicrobial ingredients prevent it from growing, producing energy, replicating or inhibiting any further growth. BirCom AM05 antimicrobial does not wear off or leach out over time and provides long-lasting and effective product protection from microbes.

Lucofin® 1413 by Lucobit AG is comprised of Polyethylene Copolymer and Thermoplastic Polyolefin Elastomer. It is commonly used

Lucofin® 1410MB by Lucobit AG is comprised of Polyethylene Copolymer and Thermoplastic Polyolefin Elastomer. It is commonly used It is available in Granules form.

Lucofin® 1453 by Lucobit AG is comprised of Polyethylene Copolymer and Thermoplastic Polyolefin Elastomer. It is commonly used It is available in Granules form.

A General Purpose Sponge and Tire Polymer

Lucofin® 1455 P by Lucobit AG is comprised of Polyethylene Copolymer and Thermoplastic Polyolefin Elastomer. It is commonly used It is available in Granules form.

Fainplast Compounds Fainplast™ PVC PG 6620 is a Polyvinyl Chloride + NBR (PVC+NBR) product. It can be processed by extrusion or profile extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America.

Lucofin® 1461 by Lucobit AG is comprised of Polyethylene Copolymer and Thermoplastic Polyolefin Elastomer. It is commonly used It is available in Granules form.