Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Segments
Nutraceuticals & Supplements
undefined
View All
HI&I Cleaning & Formulating
Chemical Manufacturing
Pharmaceuticals
Pulp & Paper
Oil & Gas
Agriculture & Feed
Case & Construction
Formulated Adhesives & Coatings
Food & Nutrition
Personal Care
Mining
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Elastomers
Specialty Elastomers
Products in Specialty Elastomers
1,645 Products found in Specialty Elastomers
Browse
Applications
Show All 6 Categories
Filters
Suppliers
Applications
Polymer Name
Mechanical Properties
Physical Properties
Processing Methods
Products
Brands
Suppliers
Formulations
Documents
Relevance
Wacker Chemie AG
ELASTOSIL® R 865/40 S
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion, Calendering
End Uses:
Automotive Components
Features:
Pigmentable, Good Processability, High Consistency, Excellent Rebound, Low Compression Set, High Resilience, Food Contact Acceptable
Tear Strength:
13.0 - 13.0 kN/m
ELASTOSIL® R 865/40 S provides a range of functional benefits. This material offers excellent rebound resilience and minimal compression set. It can be easily pigmented using ELASTOSIL® PT Pigment Pastes and exhibits favorable processing properties. The different grades available, ranging from ELASTOSIL® R 865/40 to ELASTOSIL® R 865/70, can be blended in any desired proportion to achieve intermediate hardness levels.
Wacker Chemie AG
ELASTOSIL® R 101/25 OH
Polymer Name:
Silicone Elastomer
End Uses:
Vibration Dampers
Features:
Pigmentable, Good Processability, High Durability, High Consistency, Excellent Rebound, Excellent Elasticity, Low Compression Set, High Resilience, Food Contact Acceptable, High Elasticity, Heat Stabilized
Tear Strength:
14.0 - 14.0 kN/m
ELASTOSIL® R 101/25 OH is a high-consistency silicone rubber (HCR). Vulcanizates cured with peroxide made from this compound exhibit a unique combination of characteristics. They are known for their very high rebound resilience and elasticity. The compound can be easily pigmented with ELASTOSIL® Color Paste PT and has good processing characteristics.
Wacker Chemie AG
ELASTOSIL® FX 20 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Orthotics, Prosthetics
Features:
Translucent, Bondability, Good Shrinkage Resistance, Low Skin Sensitivity, Good Flow, Low Viscosity, Good Colorability, Pourable, Flexible, Fast Curing, Excellent Flowability, Self Deaeration, Room Temperature Vulcanizing
Tear Strength:
25.0 - 25.0 kN/m
ELASTOSIL® FX 20 A/B is a room-temperature-curing silicone rubber (RTV-2) that is pourable and utilizes addition-curing. It cures at room temperature, making it convenient to work with. The main application of ELASTOSIL® FX 10 A/B is in creating special effects for movies and theater productions. It is suitable for life molding, body parts, fat makeup, wounds, prosthetic effects, soft robotics, and second skin applications.
Wacker Chemie AG
ELASTOSIL® R 510/60 S
Polymer Name:
Silicone Elastomer
End Uses:
Cables, Ignition Cables, Wire Jacketing, Battery Cable, Wires, General Purpose, Cable Jacketing
Features:
Heat Stabilized, Heat Resistance, General Purpose, High Consistency
Tear Strength:
22.0 - 22.0 kN/m
ELASTOSIL® R 510/60 S is a high-consistency silicone rubber (HCR) that cures with peroxide and is specifically designed for manufacturing silicone-insulated cables and wires. It offers excellent performance within a wide temperature range of -55°C to +225°C. This product finds applications in various areas, including cables for household appliances, ignition and battery cables, as well as measurement and control cables.
Wacker Chemie AG
ELASTOSIL® M 4470
Polymer Name:
Silicone Elastomer
End Uses:
Mold Making
Features:
Long Potlife, High Hardness, High Rigidity, Good Flow, Low Viscosity, Pourable, Heat Resistance, Good Thermal Stability, Excellent Flowability, Thermally Conductive, Self Deaeration, Room Temperature Vulcanizing
Tear Strength:
4.0 - 4.0 kN/m
ELASTOSIL® M 4470 is a room-temperature-curing silicone rubber (RTV-2) that is pourable and condensation-curing. It consists of two components and vulcanizes at room temperature. This grade offers good flowability and self-deaeration, making it easy to handle during the molding process. Additionally, it exhibits outstanding resistance to common casting resins. The main application of ELASTOSIL® M 4470 is in making molds for casting low-melting metal alloys.
Wacker Chemie AG
ELASTOSIL® RT 620 A/B
Polymer Name:
Silicone Elastomer
Features:
Translucent, Good Shrinkage Resistance, Good Tear Strength, Low Hardness, Tear Resistance, Good Flow, Low Shrinkage, Low Viscosity, Pourable, Excellent Mechanical Strength, Fast Curing, Excellent Flowability, Room Temperature Vulcanizing, Soft, High Reactivity, Food Contact Acceptable
Tear Strength:
12.0 - 12.0 kN/m
ELASTOSIL® RT 620 A/B is a pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature. It is compliant with BfR (German Federal Institute for Risk Assessment) and FDA (Food and Drug Administration) regulations, making it suitable for food-contact applications. The material is flowable and has low viscosity, ensuring easy handling.
Wacker Chemie AG
CENUSIL® M 830 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Mold Making
Features:
Good Shrinkage Resistance, Good Tear Strength, Excellent Mold Release, Good Flow, Low Viscosity, Pourable, Good Mechanical Properties, Fast Curing, Excellent Flowability, Self Deaeration, Room Temperature Vulcanizing, Food Contact Acceptable
Tear Strength:
20.0 - 20.0 kN/m
CENUSIL® M 830 A/B is a room-temperature curing silicone rubber (RTV-2) that is pourable and cures at ambient temperature. This addition-curing silicone rubber is specifically designed for making molds used in concrete casting. Moreover, CENUSIL® M 830 A/B is compliant with food contact regulations, including FDA and BfR standards.
Wacker Chemie AG
ELASTOSIL® M 4125 F A/B
Polymer Name:
Silicone Elastomer
End Uses:
Mold Making
Features:
Room Temperature Vulcanizing, Low Shrinkage, Food Contact Acceptable, Low Viscosity, Pourable, Good Mechanical Properties, Long Potlife, Ease of Handling, Fast Curing, Good Shrinkage Resistance, Excellent Flowability, Medium Hardness
ELASTOSIL® M 4125 F A/B is a pourable, addition-curing RTV-2 silicone rubber that cures at room temperature. It provides a very fast and non-shrink cure at room temperature, allowing for efficient and reliable mold-making. The main application of ELASTOSIL® M 4125 F A/B is in the production of shrink-free molds with excellent reproduction accuracy.
Wacker Chemie AG
ELASTOSIL® R 420/60 S
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion, Calendering
End Uses:
Profiles, Bathroom Accessories, Battery Cable, Tubes, Tubing, Exhaust Duct Systems, Ignition Cables, Gaskets, Vibration Dampers
Features:
High Flexibility, High Consistency, Food Contact Acceptable, Heat Stabilized, Excellent Transparency Properties, Pigmentable, Good Processability, General Purpose, Tear Resistance, Good Mechanical Properties
Tear Strength:
42.0 - 42.0 kN/m
ELASTOSIL® R 420/60 S silicone rubbers feature outstanding tear resistance and high transparency. Peroxide-cured vulcanizates made from this compound exhibit a unique combination of characteristics. It is noted for its good flexibility, high transparency, and mechanical properties. The compounds are easily pigmented with ELASTOSIL® Color Paste PT and have good processing characteristics.
Wacker Chemie AG
ELASTOSIL® R 570/60 OH
Polymer Name:
Silicone Elastomer
End Uses:
Electrodes, Keypads, Electrical Interconnectors, Electrically Conductive Rollers, Cable Accessories
Features:
High Consistency, Electrically Conductive, Low Volume Resistivity
Tear Strength:
12.0 - 12.0 kN/m
ELASTOSIL® R 570/60 OH is a peroxide-curing high-consistency silicone rubber (HCR) for the manufacture of electrically conductive products. This product is recommended to be used in control elements for cable accessories, contacts and keypads, interconnectors, electrically conductive rollers, and electrodes.
Wacker Chemie AG
ELASTOSIL® R 501/75 OH
Polymer Name:
Silicone Elastomer
End Uses:
Marine Applications, Railway Cables, Automotive Electronics, Aerospace Applications, Cables, Appliance Wire Insulation
Features:
High Consistency, High LOI (Loss On Ignition), Tear Resistance, Flame Retardant, Heat Stabilized, Heat Resistance
Tear Strength:
34.0 - 34.0 kN/m
ELASTOSIL® R 501/75 OH is a peroxide-curing high-consistency silicone rubber (HCR) for the manufacture of flame retardant products. This product is recommended to be used in cable insulations for household, automotive, railway, marine, and aerospace applications where high flame retardancy is required.
Wacker Chemie AG
ELASTOSIL® M 4370 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Mold Making
Features:
Good Shrinkage Resistance, High Hardness, High Rigidity, Good Flow, Very Good Heat Resistance, Low Shrinkage, Low Viscosity, Pourable, Heat Resistance, Good Thermal Stability, Fast Curing, Excellent Flowability, Self Deaeration, Room Temperature Vulcanizing
Tear Strength:
4.0 - 4.0 kN/m
ELASTOSIL® M 4370 A/B is a room-temperature-curing silicone rubber (RTV-2) that is pourable and utilizes addition-curing. It consists of two components and vulcanizes at room temperature. The main application of ELASTOSIL® M 4370 A/B is in creating silicone surfaces for printing rollers and making molds for casting low-melting metal alloys. This grade is compliant with FDA and BfR regulations for food contact applications.
Wacker Chemie AG
ELASTOSIL® R 865/70 S
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion, Calendering
End Uses:
Automotive Components
Features:
Pigmentable, Good Processability, High Consistency, Excellent Rebound, Low Compression Set, High Resilience, Food Contact Acceptable
Tear Strength:
18.0 - 18.0 kN/m
ELASTOSIL® R 865/70 S provides numerous functional advantages. This material ensures superior rebound resilience and minimal compression set. The compounds can be easily pigmented using ELASTOSIL® PT Pigment Pastes and exhibit good processing characteristics. The various grades available, ranging from ELASTOSIL® R 865/40 to ELASTOSIL® R 865/70, can be blended in any proportion to achieve intermediate hardness levels.
Wacker Chemie AG
SILPURAN® 2400 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Prosthetics
Features:
Good Damping, Low Skin Sensitivity, Low Hardness, Room Temperature Vulcanizing, Low Viscosity, Biocompatible, Translucent, Pourable, Fast Curing, Excellent Flowability
Tear Strength:
3.0 - 3.0 kN/m
SILPURAN® 2400 A/B is an addition-curing RTV-2 silicone rubber that cures to a silicone elastomer of low hardness. It belongs to the Room Temperature Curing Silicone Rubber (RTV-2) category. SILPURAN® 2400 A/B can be used for flexible molding applications in prosthetics. The components A and B of SILPURAN® 2400 A/B are mixed homogeneously in a ratio of 1:1 and vulcanize rapidly at temperatures over 100°C.
Wacker Chemie AG
ELASTOSIL® R 427/60
Polymer Name:
Silicone Elastomer
Processing Methods:
Compression Molding, Extrusion, Injection Molding
End Uses:
Door Profiles, Medical/Healthcare Applications, Profiles
Features:
Excellent Transparency Properties, High Clarity, High Strength, Good Tear Strength, Tear Resistance, Good Mechanical Properties, High Consistency, Shorter Cycle Time, High Tensile Strength
ELASTOSIL® R 427/60 is a high-strength silicone rubber known for its outstanding transparency, excellent tear strength, and exceptional mechanical properties. It is particularly suitable for the production of extruded profiles. The vulcanizing characteristics of this product allow for short cycle times in the manufacturing of molded articles through compression, transfer, and injection molding processes. Post-cured vulcanizates of this product can be utilized in various applications within the healthcare and food handling industries.
Wacker Chemie AG
ELASTOSIL® R 401/60 S
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion, Calendering
End Uses:
Profiles, Bathroom Accessories, Battery Cable, Control Cables, Tubes, Tubing, Exhaust Duct Systems, Spark Plug Boots, Ignition Cables, Gaskets, Vibration Dampers, General Purpose
Features:
Good Mechanical Properties, High Flexibility, High Consistency, Food Contact Acceptable, Heat Stabilized, Excellent Transparency Properties, Pigmentable, Good Processability, General Purpose
Tear Strength:
24.0 - 24.0 kN/m
ELASTOSIL® R 401/60 S is a high-consistency silicone rubber (HCR). Vulcanizates cured with peroxide made from this compound exhibit a unique combination of characteristics. It is noted for its good flexibility, high transparency, and mechanical properties. The compound is easily pigmented with ELASTOSIL® Color Paste PT and has good processing characteristics.
Wacker Chemie AG
ELASTOSIL® R 701/80 S
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion, Injection Molding
End Uses:
Automotive Components
Features:
Heat Stabilized, Excellent mineral Oil Resistance, High Consistency, Excellent Elasticity, Oil Resistant, Excellent Seal Properties, Reversion Resistance, Low Compression Set
Tear Strength:
16.0 - 16.0 kN/m
ELASTOSIL® R 701/80 S is a high-consistency silicone rubber (HCR) grade for extrusion and molding applications. The compound is recommended for all kinds of seals that come into contact with mineral oil. ELASTOSIL® R 701/80 S is used especially when low compression set is crucial for achieving good seal properties. The compound may also be used for making a high-quality silicone-rubber-covered roller.
Wacker Chemie AG
ELASTOSIL® P 7683/25 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Medical Devices, Cushions, Orthotics, Prosthetics
Features:
Heat Aging Resistant, Wide Range of Hardness, Solvent Resistant, Room Temperature Vulcanizing, Durable, Translucent, Good Aesthetics, Low Hardness, Anti-allergenic, Microbe Resistant, Low Viscosity, Chemical Resistant, Pourable, Heat Resistance, Good Mechanical Properties, High Optical Transparency, Excellent Mechanical Strength, Good Thermal Stability, High Durability, Fast Curing, Excellent Flowability, Breathable
Tear Strength:
2.0 - 2.0 kN/m
ELASTOSIL® P 7683/25 A/B is an addition-curing RTV-2 silicone rubber that cures to a silicone elastomer with very low hardness. It exhibits a fast cure at room temperature, which can be further accelerated by the application of heat. This product is specifically designed for flexible molding applications in prosthetics.
Wacker Chemie AG
ELASTOSIL® R 770/75 OH
Polymer Name:
Silicone Elastomer
End Uses:
Cables, Wires
Features:
High Consistency, High LOI (Loss On Ignition), Flame Retardant, Heat Stabilized
Tear Strength:
15.0 - 15.0 kN/m
ELASTOSIL® R 770/75 OH is a peroxide-crosslinked high-consistency silicone rubber (HCR) for the manufacture of flame retardant products. The product has been tested according to BS 6853 Cat 1 and EN 45545-2 requirement sets R22 and R23 (HL3). It can be used within a temperature range of -55 °C to +210 °C.
Wacker Chemie AG
ELASTOSIL® P 7684/60 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Cushions, Prosthetics, Medical Devices
Features:
Room Temperature Vulcanizing, Durable, Translucent, Good Aesthetics, Low Hardness, Anti-allergenic, Microbe Resistant, Low Viscosity, Chemical Resistant, Pourable, Heat Resistance, Good Mechanical Properties, High Optical Transparency, Excellent Mechanical Strength, Good Thermal Stability, High Durability, Fast Curing, Excellent Flowability, Breathable, Heat Aging Resistant, Wide Range of Hardness, Solvent Resistant
Tear Strength:
13.0 - 13.0 kN/m
ELASTOSIL® P 7684/60 A/B is an addition-curing RTV-2 silicone rubber curing to a silicone elastomer of low hardness. It exhibits a fast cure at room temperature, which can be considerably accelerated by the application of heat. This product can be used for molding applications in prosthetics.
Wacker Chemie AG
ELASTOSIL® M 4641 A/B
Polymer Name:
Silicone Elastomer
Processing Methods:
Vacuum Casting
End Uses:
Prototyping, Modeling Material, Mold Making
Features:
High Strength, Long Term Protection, High Hardness, Good Flow, Low Shrinkage, Low Viscosity, Chemical Resistant, Good Mechanical Properties, Shock Resistant, Excellent Mechanical Strength, Fast Curing, Room Temperature Vulcanizing, Food Contact Acceptable, Excellent Transparency Properties, Cost Effective, Long Potlife, Flame Resistant, Good Shrinkage Resistance, Good Tear Strength, Medium Hardness, Pourable, Excellent Flowability, High Performance
Tear Strength:
25.0 - 25.0 kN/m
ELASTOSIL® M 4641 A/B is a room-temperature-curing silicone rubber (RTV-2) that is pourable and utilizes addition-curing. It consists of two components and vulcanizes at room temperature. The main application of ELASTOSIL® M 4641 A/B is in vacuum casting for rapid prototyping, especially if crystal-clear casting resins are used. This grade is also compliant with FDA and BfR regulations for food contact applications.
Wacker Chemie AG
ELASTOSIL® M 4670 A/B
Polymer Name:
Silicone Elastomer
Processing Methods:
Vacuum Casting
End Uses:
Prototyping, Mold Making
Features:
High Strength, Cost Effective, Flame Resistant, Good Shrinkage Resistance, Long Term Protection, High Hardness, Good Tear Strength, Medium Hardness, Good Flow, Low Shrinkage, Chemical Resistant, Pourable, Good Mechanical Properties, Shock Resistant, Excellent Mechanical Strength, Fast Curing, Excellent Flowability, Room Temperature Vulcanizing, Food Contact Acceptable
Tear Strength:
12.0 - 12.0 kN/m
ELASTOSIL® M 4670 A/B is a pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature. It is primarily used for making shrink-free molds with excellent reproduction accuracy. Additionally, this grade is compliant with FDA and BfR regulations for food contact applications.
Wacker Chemie AG
ELASTOSIL® R 500/40 OH
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
End Uses:
General Purpose
Features:
General Purpose, High Consistency, Heat Stabilized
Tear Strength:
22.0 - 22.0 kN/m
ELASTOSIL® R 500/40 OH is a peroxide-cured high-consistency silicone rubber (HCR) for general-purpose applications. This product can be used within a temperature range of -55 °C to +210 °C. The addition of heat stabilizers at service temperatures of more than 180°C is recommended.
Wacker Chemie AG
ELASTOSIL® M 4601 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Mold Making
Features:
Long Potlife, Good Shrinkage Resistance, Good Tear Strength, Low Hardness, Good Flow, Low Shrinkage, Low Viscosity, Pourable, Good Mechanical Properties, Fast Curing, Excellent Flowability, Room Temperature Vulcanizing, Food Contact Acceptable
Tear Strength:
30.0 - 30.0 kN/m
ELASTOSIL® M 4601 A/B is a room-temperature-curing silicone rubber (RTV-2) that is pourable and utilizes addition-curing. It consists of two components and vulcanizes at room temperature. The main application of ELASTOSIL® M 4601 A/B is in making shrink-free molds with excellent reproduction accuracy. This grade is also compliant with FDA and BfR regulations for food contact applications.
Wacker Chemie AG
ELASTOSIL® R 770/60 OH
Polymer Name:
Silicone Elastomer
End Uses:
Cables, Construction Applications, Profiles, Marine Applications, Wires, Automotive Applications, Aerospace Applications
Features:
Heat Stabilized, High Consistency, High LOI (Loss On Ignition), Flame Retardant
Tear Strength:
14.0 - 14.0 kN/m
ELASTOSIL® R 770/60 OH is a peroxide-crosslinked high-consistency silicone rubber (HCR) for the manufacture of flame retardant products. It is used for construction, automotive, railway, marine, and aerospace applications where high flame retardancy is required. This product can be used within a temperature range of -55 °C to +210 °C.
Wacker Chemie AG
ELASTOSIL® R 420/30 OH
Polymer Name:
Silicone Elastomer
Processing Methods:
Injection Molding, Transfer Molding, Compression Molding
End Uses:
Tubes, Exhaust Duct Systems, Vibration Dampers, Profiles
Features:
Food Contact Acceptable, Heat Stabilized, Excellent Transparency Properties, Pigmentable, Good Processability, Tear Resistance, Good Mechanical Properties, High Flexibility, High Consistency
Tear Strength:
24.0 - 24.0 kN/m
ELASTOSIL® R 420/30 OH is a high-consistency silicone rubber (HCR) that features outstanding tear resistance and high transparency. The peroxide-cured vulcanizates made from this compound exhibit a unique combination of characteristics. It is known for its good flexibility, high transparency, and mechanical properties. The compounds can be easily pigmented with ELASTOSIL® Color Paste PT and demonstrate good processing characteristics.
Wacker Chemie AG
ELASTOSIL® P 7616-160 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Orthotics, Prosthetics, Implants
Features:
Low Viscosity, Pourable, Light Weight, Good Adhesion
ELASTOSIL® P 7616-160 A/B is an addition-curing RTV-2 silicone rubber that cures to form a soft gel. It exhibits good adhesion to polyurethane film and easy metering and mixing. It is commonly used in the production of external mammary prostheses, where it serves as the material for the outer skin, which is made of polyurethane film.
Wacker Chemie AG
ELASTOSIL® R 756/40 OH
Polymer Name:
Silicone Elastomer
End Uses:
Household Goods, Automotive Components
Features:
High Consistency, Tear Resistance, Low Compression Set, High Temperature Application, Food Contact Acceptable, High Elasticity, Hot Air Resistant, Heat Resistance
Tear Strength:
20.0 - 20.0 kN/m
ELASTOSIL® R 756/40 OH is a high consistency silicone rubber that undergoes peroxide curing. The resulting vulcanizates exhibit outstanding resistance to hot air, especially when a heat stabilizer is added. These vulcanizates also demonstrate favorable properties such as good tear resistance, low compression set, and high elasticity.
Wacker Chemie AG
ELASTOSIL® R 490/55 OH
Polymer Name:
Silicone Elastomer
Processing Methods:
Transfer Molding, Compression Molding, Extrusion, Injection Molding
End Uses:
Tubing, Automotive Components, Profiles
Features:
Heat Stabilized, Excellent Transparency Properties, Pigmentable, Good Processability, Low Temperature Flexibility, Good Mechanical Properties, High Flexibility, High Consistency
Tear Strength:
30.0 - 30.0 kN/m
ELASTOSIL® R 490/55 OH is a phenyl silicone rubber (PMVQ) specifically designed for the production of articles with excellent low-temperature flexibility. Vulcanizates cured with peroxide made from this compound possess a distinctive set of qualities, including good flexibility, high transparency, and favorable mechanical properties. This compound can be easily pigmented using Elastosil® Color Paste PT and exhibits favorable processing characteristics.
Wacker Chemie AG
ELASTOSIL® R 805/75 OH
Polymer Name:
Silicone Elastomer
Processing Methods:
Transfer Molding, Injection Molding, Compression Molding
Features:
Heat Stabilized, Good Mechanical Properties, Excellent mineral Oil Resistance, High Consistency, Oil Resistant, Low Compression Set
Tear Strength:
17.0 - 17.0 kN/m
ELASTOSIL® R 805/75 OH is a high-consistency silicone rubber (HCR) that produces vulcanizates with excellent resistance to engine oils and aggressive mineral oils, even at high temperatures. It is an oil-resistant, peroxide-curing silicone rubber. The vulcanizates exhibit good mechanical properties and a low compression set.
Wacker Chemie AG
ELASTOSIL® R 861/70 S
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
End Uses:
Automotive Components, Household Goods, Profiles, Medical Devices, Facades, Cup Holders
Features:
Translucent, Steam Resistant, Low Compression Set, Coolant Resistant, High Flexibility, High Consistency, Food Contact Acceptable
Tear Strength:
17.0 - 17.0 kN/m
ELASTOSIL® R 861/70 S is a translucent compound that is highly flexible and is noted for its low compression set and improved media and coolant resistance. This compound can be used in the manufacture of molded parts but also, particularly by extrusion, for producing profiles, e. g., for windows and facades.
Wacker Chemie AG
ELASTOSIL® R 701/50 OH
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion, Injection Molding
End Uses:
Automotive Components
Features:
Excellent mineral Oil Resistance, High Consistency, Excellent Elasticity, Oil Resistant, Excellent Seal Properties, Reversion Resistance, Low Compression Set, Heat Stabilized
Tear Strength:
17.0 - 17.0 kN/m
ELASTOSIL® R 701/50 OH is a high-consistency silicone rubber (HCR) grade for extrusion and molding applications. The compound is recommended for all kinds of seals that come into contact with mineral oil. ELASTOSIL® R 701/50 OH is used especially when low compression set is crucial for achieving good seal properties. It may also be used for making a high-quality silicone-rubber-covered roller.
Wacker Chemie AG
ELASTOSIL® R 401/90 OH
Polymer Name:
Silicone Elastomer
Processing Methods:
Calendering, Extrusion
End Uses:
Tubes, Tubing, Exhaust Duct Systems, Gaskets, General Purpose, Profiles
Features:
Food Contact Acceptable, Heat Stabilized, Excellent Transparency Properties, Pigmentable, Good Processability, General Purpose, Good Mechanical Properties, High Flexibility, High Consistency
Tear Strength:
14.0 - 14.0 kN/m
ELASTOSIL® R 401/90 OH is a high-consistency silicone rubber (HCR). Vulcanizates cured with peroxide made from this compound exhibit a unique combination of characteristics. It is noted for its good flexibility, high transparency, and mechanical properties. The compound is easily pigmented with ELASTOSIL® Color Paste PT and has good processing characteristics.
Wacker Chemie AG
ELASTOSIL® P 26028 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Anti-Decubitus Cushions, Medical Devices
Features:
Low Viscosity, Good Damping, Good Adhesion
ELASTOSIL® P 26028 A/B is a pourable, addition-curing RTV-2 silicone rubber that cures at room temperature. It provides a very fast and non-shrink cure at room temperature, allowing for efficient and reliable mold-making. The main application of ELASTOSIL® P 26028 A/B is in the production of shrink-free molds with excellent reproduction accuracy.
Wacker Chemie AG
ELASTOSIL® M 4630 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Mold Making, Bathroom Accessories
Features:
Long Potlife, Good Shrinkage Resistance, Good Tear Strength, Low Hardness, Good Flow, Low Shrinkage, Low Viscosity, Pourable, Good Mechanical Properties, Excellent Mechanical Strength, Fast Curing, Excellent Flowability, Room Temperature Vulcanizing, Food Contact Acceptable
Tear Strength:
30.0 - 30.0 kN/m
ELASTOSIL® M 4630 A/B is a pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature. It offers a fast and non-shrink cure at room temperature, which can be significantly accelerated with the application of heat. The main application of ELASTOSIL® M 4630 A/B is in making molds for concrete casting. Additionally, this grade is compliant with FDA regulations for food contact applications.
Wacker Chemie AG
SILMIX® M40 Black
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
Features:
High Consistency, Good Mechanical Properties, Good Flexibility
Tear Strength:
26.25 - 26.25 kN/m
SILMIX® M40 Black is a compound used for fabricating vulcanizates that exhibit a unique combination of characteristics. They are noted for their good flexibility and mechanical properties. SILMIX® M40 Black is designed for fabricating molded articles. Furthermore, post-cured parts made from this compound can be used for food contact applications and are suitable for use under recommendation "XV."
Show
36
of 1,645 results
Go to page
1
2
3
4
5
6
7
8
9
10