Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Markets
- Cure Method
- Plastics & Elastomers End Uses
- Applications
- Insoles, Orthoses & Pelottes
- Orthotics & Prosthetics
- Application Details
SILPURAN® 2400 A/B can be used for flexible molding applications in prosthetics.
Processing
- The components A and B of SILPURAN® 2400 A/B are mixed homogeneously in a ratio of 1 : 1 and vulcanize rapidly at temperatures over 100°C.
- In a given application the required curing conditions (temperature and time) will also depend on the size and thickness of the part.
- Detailed instructions for preparation and use are given in the brochure “Room Temperature Vulcanizing (RTV) Silicones - Material and Processing Guidelines”
- Important note : The platinum catalyst is in component A.
- Caution : Only A and B components with the same batch number may be processed together
Properties
- Catalyst Properties
- Cured Properties
- Uncured Properties
- Properties
- Biocompatible, certificates of compatibility with USP Class VI and ISO 10993 available on request
- No by-products from curing process
- Medium viscosity, easily pourable
- Mixing ratio 1 : 1
- Rapid cure at room temperature which can be accelerated considerably by the application of heat
- Translucent vulcanizate
- Note
Curing conditions: 10 min / 100 °C
| Value | Units | Test Method / Conditions | |
| Mix Ratio (A:B) | 1:1 | parts by weight | — |
| Pot Life (A+B, at 23°C) | 21 | minutes | DIN EN ISO 2555 |
| Value | Units | Test Method / Conditions | |
| Elongation (at break) | 600 | % | ISO 37 Type 1 |
| Shore Hardness 00 | 55 | — | ASTM D 2240 |
| Shore Hardness A | 7 | — | DIN ISO 48-4 |
| Tear Strength | 3 | N/mm | ASTM D 624 B |
| Tensile Strength | 2 | N/mm² | ISO 37 Type 1 |
| Value | Units | Test Method / Conditions | |
| Density (Componenet A) | 1 | g/cm³ | DIN EN ISO 2811-1 |
| Density (Componenet B) | 1 | g/cm³ | DIN EN ISO 2811-1 |
| Dynamic Viscosity (Component A) | 1800 | mPa·s | DIN EN ISO 3219 |
| Dynamic Viscosity (Component B) | 1800 | mPa·s | DIN EN ISO 3219 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability