Products in Thermoplastic Olefin Elastomers (TPO)

Espolex® 3675A is a TPV known for its excellent colorability and appearance. It exhibits strong adhesion to polypropylene compounds and polyethylene, while possessing thermoplastic processing characteristics and rubber-like properties.   Applications: Automotive interior (gaskets, grips, etc.) Automotive exterior trim Seat belt sleeves Gaskets Floor mats Overmolding Bathroom accessories Boats Jet-propelled vehicles Mud flaps Weatherstripping Injection molded parts   Features: High flowability Rubber-like elasticity and feel   Benefits: Recyclable

Espolex® 3255 is a TPV known for its excellent colorability and appearance. It forms strong bonds with polypropylene compounds and polyethylene, while exhibiting thermoplastic processing characteristics combined with rubber-like properties. It is particularly well-suited for two-shot molding. Its applications include: Handle grips Gaskets Active spoilers Appliances Automotive exterior trim Automotive interior trim Boats Jet-propelled vehicles Mud flaps Weatherstripping Over-molding Injection molded parts   Features: Excellent flowability Great surface appearance for styling Easy bonding with other materials Benefits: Anti-slip properties Noise reduction

Espolex® WT1020 is a 20% glass filled, Thermoplastic Elastomer for injection molding. It has the soft touch feeling, low gloss, good impact, high stiffness and good scratch resistance. Applications: Automotive Interior Trim Door handles Flocked Bin Soft touch application Boat Jet-Propelled Vehicle Injection Molded Parts   Features: Excellent haptics Low gloss Good scratch resistance   Benefits: Rigid and Soft touch feeling

Espolex® CPD-450 is a Thermoplastic Elastomer which processes like a thermoplastic and acts like a rubber with excellent flowability. Good balance of stiffness and durometer. Applications: Bin and Floor Mats Appliances Automotive Exterior Trim Automotive Interior Trim Boat Jet-Propelled Vehicle Mud Flaps Weatherstripping Over-molding Injection Molded Parts   Features: Heat Stabilized Black High Melt Flow   Benefits: Anti slip Noise reduction

Espolex® 3785A is a TPV known for its excellent colorability and appearance. It demonstrates strong adhesion to polypropylene compounds and polyethylene, processing like a thermoplastic while acting like a rubber.   Applications: Automotive interior (gaskets, grips, etc.) Automotive exterior Gaskets Mats Overmolding Bathroom accessories Boats Floor mats Jet-propelled vehicles Mud flaps Weatherstripping Injection molded parts   Features: High flowability Rubber-like elasticity and feel   Benefits: Recyclable

Espolex® WT570 is a Thermoplastic Elastomer with high impact performance and excellent processability at extrusion molding. It shows good impact performance, especially at low temperatures.   Applications: Automotive Interior Trim Airbag Cover Cable Hose Boat Jet-propelled Vehicle Extruded Parts Injection-molded parts   Features: Excellent impact performance at low temperatures well-balanced mechanical property   Benefits: Mold-in-Color Recyclable

Espolex® WT1025 is a 25% glass filled, Thermoplastic Elastomer for injection molding. It has the soft touch feeling, low gloss, good impact, high stiffness and good scratch resistance. Applications: Automotive Interior Door handles Flocked bin Soft touch application Boat Jet-Propelled vehicle Injection molded parts   Features: Excellent haptics Low gloss Good scratch resistance   Benefits: Rigid and Soft touch feeling

Espolex® WT1015 is a 15% glass filled, Thermoplastic Elastomer for injection molding. It has the soft touch feeling, low gloss, good impact, high stiffness and good scratch resistance. Applications: Automotive interior trim Injection molded parts Door handles Flocked bin Soft touch application Boat Jet-Propelled vehicle   Features: Excellent haptics Low gloss Good scratch resistance   Benefits: Rigid and Soft touch feeling

Noblen® SNCT0507 Natural is a polypropylene impact TPO. It is used in off-road vehicle exterior parts. This product is suitable for Injection molding.   Applications: Large components Appliances Automotive Interior Trim Boat Jet-propelled Vehicle   Features: Good stiffness with impact performance and high Melt flow   Benefits: Easy to fill large parts

WIPELAST TV 20 BK UV is a black composite material with a base of polypropylene-EPDM and 20% talc filler, specifically designed for use in the automotive market segment. It has been UV-stabilized to enhance its performance under UV exposure. To achieve optimal processing conditions, the material must be pre-dried at 60-100°C in an air-circulating dryer for 2-4 hours, depending on the initial moisture content, to ensure a maximum moisture content of 0.10%.

WIPAFLEX TV 10 BK UV is a black composite material suitable for various automotive market segments. It contains polypropylene-polyethylene-EPDM as the base polymer and 10% talc filler. To achieve optimal processing conditions, it must be pre-dried at 60-100°C in an air-circulating dryer for 2-4 hours, depending on the initial moisture content, to ensure a maximum moisture content of 0.10%. The recommended processing method is injection molding, with a melt temperature range of 200-270°C and a mold temperature range of 20-60°C.

WIPELAST TV 10 BK UV is a black composite material suitable for various automotive market segments. It consists of polypropylene-EPDM as the base polymer and 10% talc filler. The material is UV stabilized, which is its special feature. To achieve optimal processing conditions, it must be pre-dried at 60-100°C in an air-circulating dryer for 2-4 hours, depending on the initial moisture content, to ensure a maximum moisture content of 0.10%. The material is recommended for processing using injection molding, with a melt temperature of 200-270°C and a mold temperature of 20-60°C.

WIPELAST TV 20 BK is a black composite material suitable for use in the automotive market segment. It consists of polypropylene-EPDM as the base polymer and 20% talc filler. To achieve optimal processing conditions, it must be pre-dried at 60-100°C in an air-circulating dryer for 2-4 hours, depending on the initial moisture content, to ensure a maximum moisture content of 0.10%. The material is recommended for processing using injection molding, with a melt temperature of 200-270°C and a mold temperature of 20-60°C.

WIPELAST TV 10 BK is a black composite material suitable for various automotive market segments. It contains polypropylene-EPDM as the base polymer and 10% talc filler. To achieve optimal processing conditions, it must be pre-dried at 60-100°C in an air-circulating dryer for 2-4 hours, depending on the initial moisture content, to ensure a maximum moisture content of 0.10%. The recommended processing method is injection molding, with a melt temperature range of 200-270°C and a mold temperature range of 20-60°C.

WIPELAST TV 30 BK is a black composite made of polypropylene-EPDM, containing 30% talc filler. It is suitable for a variety of markets, including the automotive industry. Pre-drying is necessary at 60-100°C in an air-circulating dryer for 2-4 hours, depending on the initial moisture content, to achieve a maximum moisture content of 0.10%. Injection molding is recommended, with a melt temperature of 200-270°C and a mold temperature of 20-60°C.

WIPAFLEX TV 10 BK is a black material with heat-age stabilization properties intended for use in various automotive applications. The material is a blend of polypropylene, polyethylene, and EPDM, with 10% talc added as a filler. Prior to processing via injection molding, the material must be pre-dried at temperatures between 60 and 100°C for 2-4 hours, depending on its moisture content, which should not exceed 0.10%. During injection molding, the material should be melted at temperatures ranging from 200 to 270°C, with a mold temperature between 20 and 60°C. All temperatures must be carefully monitored to ensure they fall within the specified ranges.

WIPELAST TV 30 BK UV is a black polypropylene-EPDM composite material with 30% talc filler and UV stabilizers, specifically designed for use in the automotive industry. Prior to processing, the material must be pre-dried at 60-100°C in an air-circulating dryer for 2-4 hours, depending on the initial moisture content, to achieve a maximum moisture content of 0.10%. During processing, the melt temperature should be maintained at 200-270°C, with a mold temperature of 20-60°C during injection molding.

WIPAFLEX TV 5 BK is a black composite material suitable for various automotive market segments. It contains polypropylene-polyethylene-EPDM as the base polymer and 5% talc filler. To achieve optimal processing conditions, it must be pre-dried at 60-100°C in an air-circulating dryer for 2-4 hours, depending on the initial moisture content, to ensure a maximum moisture content of 0.10%. The recommended processing method is injection molding, with a melt temperature range of 200-270°C and a mold temperature range of 20-60°C.

CableFill® 300 bedding compound for wire and cable applications is:ExtrudableFlexibleEasy peelFree flowingFlame-retardantHalogen free

CableFill® 200 bedding compound for wire and cable applications is:ExtrudableFlexibleEasy peelFree flowingFlame-retardantHalogen free

Advanced Composites ADX-5324 is a mineral-filled thermoplastic olefin compound with a balanced combination of stiffness and impact resistance, making it suitable for mold-in-color applications such as interior trim. It is UV-stable and scratch-resistant and has material approval from Ford: WSK-M4D550-A.

Advanced Composites BJ5H-MF is an unfilled thermoplastic olefin compound designed to offer a balance of stiffness and impact. It features a high flow rate, is UV-stable, and is suitable for mold-in-color interior applications. It is particularly intended for interior trim applications.

Advanced Composites ADX-2357 is a mineral-filled thermoplastic olefin compound that provides an outstanding balance of stiffness and impact resistance. Its high flow rate, ductility at low temperatures, low CLTE, and UV stability make it a perfect choice for mold-in-color exterior automotive applications, particularly for exterior trim.

Advanced Composites ADX-5369 is a reduced-density mineral-filled thermoplastic olefin compound that offers an excellent balance of stiffness and impact resistance. It is suitable for mold-in-color interior applications such as instrument panels, pillars, and interior trims. It is UV-stable, scratch-resistant, and ductile at cold temperatures.

Advanced Composites ADX-5301 is a thermoplastic olefin blended with minerals, providing exceptional stiffness, scratch resistance, and UV stability, which makes it suitable for mold-in-color applications like interior trims and consoles. The material is approved by GMW15548-T6A/T1A and Stellantis MS-DC265 Type E (CPN 5036).

Advanced Composites ADX-2310 is a mineral-filled thermoplastic olefin compound that is designed to provide a balance of stiffness and impact resistance. It is suitable for use in mold-in-color exterior applications and has several desirable properties, including high flow, ductility at cold temperatures, UV stability, and scratch resistance. In addition, it has a high stiffness that makes it a versatile choice for a range of applications.

Advanced Composites ADX-8302 is an eco-friendly mineral-filled thermoplastic olefin compound that contains 50% post-consumer recycled content. It is engineered to offer high stiffness, UV stability, and scratch resistance, making it perfect for mold-in-color interior applications such as consoles and interior trims. It has material approval from GM: GMW15702-260030.

Advanced Composites adx-2317 is a mineral-filled thermoplastic olefin compound that is designed to provide a balance of stiffness and impact resistance. It is suitable for use in non-visible exterior applications and has desirable properties, including ductility at cold temperatures. One of the main common applications for this compound includes energy absorbers.

Advanced Composites ADX-1133 is a UV-stable, unfilled thermoplastic olefin compound that offers a balanced combination of stiffness and impact resistance. It's suitable for mold-in-color applications in both underhood and interior trim, making it a great choice for high-impact applications that require durability.

Advanced Composites ADX-5361 is a mineral-filled thermoplastic olefin compound that is designed to offer a balance of stiffness and impact resistance. It has high flow properties and is UV-stable and scratch-resistant, making it suitable for mold-in-color interior applications such as door panels, consoles, and interior trims.

Advanced Composites AX-500FR is a non-halogenated thermoplastic olefin compound designed for UL V-0 level flame retardancy at thicknesses of 1.5mm and 3.0mm. It has a high stiffness level and is intended for flame-retardant applications where high moisture levels are not present.

Advanced Composites AX-510FR is a non-halogenated thermoplastic olefin compound with reduced density that is specifically formulated to achieve UL V-0 level flame retardancy at a thickness of 3.0mm. It has high stiffness and is suitable for flame-retardant applications that do not involve high moisture levels.

Advanced Composites ADX-5023 is a mineral-filled thermoplastic olefin compound that is designed to provide an excellent balance of stiffness and impact resistance. It is suitable for use in mold-in-color interior applications and has several desirable properties, including high stiffness, high impact resistance, UV stability, scratch resistance, and ductility at cold temperatures.

Advanced Composites ADX-2377 is a reduced-density mineral-filled thermoplastic olefin compound designed for an excellent balance of stiffness and impact. It is UV-stable, scratch-resistant, ductile at low temperatures, and suitable for mold-in-color exterior applications. This compound is characterized by its high impact resistance, scratch resistance, UV stability, and reduced density.

Advanced Composites SRH-35HF is a thermoplastic olefin compound filled with minerals, specifically formulated for applications that require high stiffness. Its exceptional flowability, along with its UV resistance, make it ideal for use in mold-in-color interior applications. It is a great fit for interior trim applications.

Advanced Composites ADX-1328 is a mineral-filled thermoplastic olefin compound designed to provide an excellent balance of stiffness and impact. This compound is ductile even at low temperatures, making it suitable for use in painted or covered interior applications. Its features include high impact resistance, which makes it an ideal choice for various applications, including pillars and interior trim.