Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Fillers Included
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Mechanical Properties
Value Units Test Method / Conditions Flexural Modulus 1400.0 MPa ISO 178 Flexural Strength 23.0 MPa ISO 178 Shore Hardness D (15s) 53.0 - ISO 868 Tensile Modulus 1500.0 MPa ISO 527 Tensile Strength 17.0 MPa ISO 527 Tensile Elongation at Break 30.0 % ISO 527 Impact Strength (Charpy, at 23°C) 110.0 kJ/m² ISO 179/1eU Impact Strength (Charpy, at -40°C) 68.0 kJ/m² ISO 179/1eU Notched Impact Strength (Charpy, at 23°C) 35.0 kJ/m² ISO 179/1eA Notched Impact (Charpy, at -40°C) 4.3 kJ/m² ISO 179/1eA - Physical Properties
Value Units Test Method / Conditions Density 1040.0 kg/m³ ISO 1183 Global Warming Potential (GWP) 0.81 kg CO₂ eq. ISO 14040, 14044 - Thermal Properties
Value Units Test Method / Conditions Vicat B50 54.0 °C ISO 306 HDT / A (1.8 MPa) 62.0 °C ISO 75-1/-2 HDT / B (0.45 MPa) 106.0 °C ISO 75-1/-2 DSC (Melt Point) 163.0 °C ISO 11357-1/-3 - Typical Properties
Value Units Test Method / Conditions Moisture Content max. 0.1 % - - Processing Information (Injection Molding)
Value Units Test Method / Conditions Mould Temperature 20 - 60 °C - Melt Temperature 200 - 270 °C - - Rheological Properties
Value Units Test Method / Conditions Melt Index (MVR) 12.0 cm³/10min ISO 1133 Melt Index (MFR) 10.0 g/10min ISO 1133 MVR Temperature 230.0 °C - MVR Load 2.16 kg - Molding Shrinkage (parallel) 0.8 % ISO 294-4, 2577 Molding Shrinkage (normal) 1.0 % ISO 294-4, 2577
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- 60-100°C in an air circulating dryer for 2-4h
- Dependant on moisture content
Storage & Handling
- Storage Conditions
Store in dry, protected from light.