Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Segments
Nutraceuticals & Supplements
undefined
View All
HI&I Cleaning & Formulating
Chemical Manufacturing
Pharmaceuticals
Pulp & Paper
Oil & Gas
Agriculture & Feed
Case & Construction
Formulated Adhesives & Coatings
Food & Nutrition
Personal Care
Mining
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Elastomers
Thermoset Elastomers
EP Rubbers (EPDM)
Products in EP Rubbers (EPDM)
211 Products found in EP Rubbers (EPDM)
Filters
Suppliers
Applications
Polymer Name
End Uses
Processing Methods
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
Electric Cable Compounds
AquaGraft® 61-7125
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
Density:
1350.0 - 1350.0 kg/m³
Synonyms:
Antimony Sesquioxide, Antimony(III) oxide
AquaGraft® 61-7125 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties
Electric Cable Compounds
AquaGraft® 16-5150
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
Density:
1060.0 - 1060.0 kg/m³
Synonyms:
Antimony Sesquioxide, Antimony(III) oxide
AquaGraft® 16-5150 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties
Electric Cable Compounds
AquaGraft® 4-5150
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
Density:
1060.0 - 1060.0 kg/m³
Synonyms:
Antimony Sesquioxide, Antimony(III) oxide
AquaGraft® 4-5150 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties
Electric Cable Compounds
SuperOhm® 3749
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Density:
1090.0 - 1130.0 kg/m³
Orange polymeric composition in pellet form, based on EPR rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line.
Electric Cable Compounds
SuperOhm® 3754
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Density:
1170.0 - 1210.0 kg/m³
SuperOhm® 3754 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.
Electric Cable Compounds
SuperOhm® 2565
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Density:
1130.0 - 1170.0 kg/m³
Superohm® 2565 is an oil and solvent resistant off-white colorable polymeric composition in pellet form, based on EPDM rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line. It is formulated to obtain balanced performance characteristics with excellent electrical properties suitable for operation up to 450F (230C) and 25 kV in appropriate cable construction when extruded and cured consistent with industry standards.
Electric Cable Compounds
SuperOhm® 2595
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
Density:
1130.0 - 1170.0 kg/m³
SuperOhm® 2595 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.
Electric Cable Compounds
AquaGraft® EPMC-2
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Density:
890.0 - 890.0 kg/m³
AquaGraft® EPMC-2 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties
Electric Cable Compounds
SuperOhm® 3748
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Density:
1130.0 - 1170.0 kg/m³
Orange polymeric composition in pellet form, based on EPR rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line.
Electric Cable Compounds
SuperOhm® 2502
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Density:
1120.0 - 1160.0 kg/m³
Off-white colorable, flame retardant, low voltage composition in pellet form, EPDM-rubber based and containing peroxide curing agent, ready for extrusion in a conventional CV line.
Electric Cable Compounds
SuperOhm® 3450
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
Density:
1460.0 - 1460.0 kg/m³
SuperOhm® 3450 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.
Electric Cable Compounds
SuperOhm® 3753
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Density:
1200.0 - 1240.0 kg/m³
Off-white colorable, flame retardant, low voltage composition in pellet form, EPDM-rubber based and containing peroxide curing agent, ready for extrusion in a conventional CV line.
Electric Cable Compounds
SuperOhm® 3728-5
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Density:
1180.0 - 1220.0 kg/m³
Reddish - orange colored polymeric composition in pellet form, based on EPDM rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line.
Electric Cable Compounds
SuperOhm® 3768
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Density:
1170.0 - 1210.0 kg/m³
SuperOhm® 3768 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.
Electric Cable Compounds
SuperOhm® 3712
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Density:
1330.0 - 1370.0 kg/m³
Reddish - orange colored polymeric composition in pellet form, based on EPDM rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line.
Electric Cable Compounds
AquaGraft® 7020
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
Density:
1450.0 - 1450.0 kg/m³
AquaGraft® 7020 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties
Electric Cable Compounds
SuperOhm® 4474
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Additives Included:
Flame Retardant, UV Stabilizer
Density:
1300.0 - 1340.0 kg/m³
Colorable flame retardant polymeric composition in pellet form, based on EPDM rubber containing peroxide curing agent, ready for extrusion in a conventional CV extrusion line. Cables insulated with this compound are recognized for balanced properties including excellent heat, radiation, deformation resistance at high temperatures, and superior flexibility.
Electric Cable Compounds
SuperOhm® 3455
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
Density:
1500.0 - 1500.0 kg/m³
SuperOhm® 3455 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.
Electric Cable Compounds
SuperOhm® 240-NL-HE
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Density:
1300.0 - 1300.0 kg/m³
Superohm® 240 NL-HE is a RoHS compliant, highly flexible, colorable, polymeric composition in pellet form, based on EPR rubber, containing peroxide curing agent, ready for extrusion in a conventional CV or Dry cure extrusion line. It is formulated to obtain balanced performance characteristics with excellent electrical properties suitable for applications up to 25kV.
Electric Cable Compounds
SuperOhm® 3752
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Density:
1180.0 - 1220.0 kg/m³
Off-white colorable, flame retardant, low voltage composition in pellet form, EPDM-rubber based and containing peroxide curing agent, ready for extrusion in a conventional CV line.
Electric Cable Compounds
SuperOhm® 2560
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Density:
1170.0 - 1210.0 kg/m³
Superohm® 2560 is an oil and solvent resistant off-white colorable polymeric composition in pellet form, based on EPDM rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line. Cables jacketed with this compound are recognized for balanced properties including excellent heat and deformation resistance at high temperatures, oil resistance, and superior mechanical properties and is suitable for operation up to 450F (230C) in appropriate cable construction when extruded and cured consistent with industry standards.
Electric Cable Compounds
SuperOhm® 4863
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
Density:
1330.0 - 1370.0 kg/m³
Colorable flame retardant polymeric composition in pellet form, based on EPR rubber containing peroxide curing agent, ready for extrusion in a conventional CV extrusion line. Cables insulated with this compound are recognized for balanced properties including excellent heat, radiation, crush, deformation resistance at high temperatures, and superior flexibility.
Electric Cable Compounds
SuperOhm® 2575
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
Density:
1180.0 - 1180.0 kg/m³
SuperOhm® 2575 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.
Electric Cable Compounds
AquaGraft® 8020
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
Density:
1480.0 - 1480.0 kg/m³
AquaGraft® 8020 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties
Electric Cable Compounds
AquaGraft® EPMC-16
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Density:
907.0 - 907.0 kg/m³
AquaGraft® EPMC-16 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties
Electric Cable Compounds
AquaGraft® EPMC-4
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Density:
907.0 - 907.0 kg/m³
AquaGraft® EPMC-4 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties
Electric Cable Compounds
AquaGraft® 16-6010
Density:
1300.0 - 1300.0 kg/m³
Aquagraft® 16-6010 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties
Electric Cable Compounds
SuperOhm® 2582
Density:
1280.0 - 1320.0 kg/m³
Off-white colorable, flame retardant, low voltage composition in pellet form, EPDM-rubber based and containing peroxide curing agent, ready for extrusion in a conventional CV line.
Electric Cable Compounds
SuperOhm® 3443
Density:
1350.0 - 1350.0 kg/m³
Superohm® 3443 is a UL listed 150°C stationary, 125°C flexible low smoke, non-halogenated, lead free flame retardant crosslinkable EPR insulation compound. It is formulated to obtain balanced performance characteristics with excellent electrical properties, outstanding ozone resistance, flexibility, thermal stability and flame retardancy. Superohm® 3443 is a colorable polymeric composition based on ethylene propylene rubber (EPR) containing peroxide curing agent. In a free flowing pellet form, this compound is ready for extrusion in a conventional CV extrusion line.
Elastomer Engineering
EPDM Peroxide 80 WRAS G
Polymer Name:
Ethylene Propylene Diene Terpolymer (EPDM)
Density:
1110.0 - 1150.0 kg/m³
EPDM Peroxide 80 WRAS G is a Peroxide Cured EPDM elastomer, with good physical properties & meets the requirements of BS 6920-1:2000 and BS EN681-1 WA 80.EPDM rubber has excellent heat, ozone and chemical resistance propertiesEPDM also has good physical properties and is resistant to polar fluidsLow-temperature properties require the polymer to be amorphous and low on ethylene (speak to the expert)Good electrical properties require high ethylene to facilitate high doses of inert mineral fillers to give good electrical resistanceEPDM rubber can be compounded to provide excellent electrical resistance
SACO AEI Polymers
EXTINITY® 0211-301
Polymer Name:
Ethylene Propylene Copolymer
Additives Included:
Flame Retardant
Density:
2660.0 - 2660.0 kg/m³
EXTINITY® 0211-301 is a highly loaded antimony oxide concentrate in an EPDM carrier resin. The antimony oxide content in EXTINITY® 0211-301 is 80% by weight. All SACO AEI Polymers flame retardant concentrates are much more easily dispersed and therefore provide resultant materials with superior physical properties and flame resistance versus the use of additives in their naturally occurring state.
Elastomer Engineering
EPDM EN 45545-2
Polymer Name:
Ethylene Propylene Diene Terpolymer (EPDM)
Additives Included:
Flame Retardant
Density:
1480.0 - 1520.0 kg/m³
DLR Elastomer Engineering Ltd EN 45545-2 is a black fire resistant Ethylene Propylene Diene Rubber (EPDM).EPDM rubber has excellent heat, ozone and chemical resistance propertiesEPDM also has good physical properties and is resistant to polar fluidsLow-temperature properties require the polymer to be amorphous and low on ethylene (speak to the expert)Good electrical properties require high ethylene to facilitate high doses of inert mineral fillers to give good electrical resistanceEPDM rubber can be compounded to provide excellent electrical resistance
Elastomer Engineering
EPDM 80 B WRAS R1 [E6392]
Polymer Name:
Ethylene Propylene Diene Terpolymer (EPDM)
Density:
1280.0 - 1320.0 kg/m³
EPDM 80 B WRAS R1 [E6392] is an EPDM elastomer with good physical properties & meets the requirements of BS 6920-1:2000 and BS EN681-1 WA 70.EPDM rubber has excellent heat, ozone and chemical resistance propertiesEPDM also has good physical properties and is resistant to polar fluidsLow-temperature properties require the polymer to be amorphous and low on ethylene (speak to the expert)Good electrical properties require high ethylene to facilitate high doses of inert mineral fillers to give good electrical resistanceEPDM rubber can be compounded to provide excellent electrical resistance
SACO AEI Polymers
PEXIDAN® SX554
Polymer Name:
Ethylene Propylene Diene Terpolymer (EPDM)
Processing Methods:
Extrusion
Density:
900.0 - 900.0 kg/m³
PEXIDAN® SX554 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM493, in the ratio 95:5, or CM497, in the ratio between 90:10 and 93:7.CM493 is a stronger catalyst suitable for wall thicknesses > 1.5mm and CM497 is a weaker catalyst suitable for small conductor sizes, such as 1 to 4 mm2. The system SX554:CM493 or SX554:CM497, has been approved for use at 1kV and has found uses up to 10kV, it is highly flexible and enables the production of soft rubber cables without the use of continuous vulcanization equipment. Crosslinking is obtained by exposure to moist or hot water immersion only.
SACO AEI Polymers
PEXIDAN® SX505NT
Polymer Name:
Ethylene Propylene Diene Terpolymer (EPDM)
Processing Methods:
Extrusion
Additives Included:
Stabilizer (Unspecified), Tree Retardant
Density:
900.0 - 900.0 kg/m³
PEXIDAN® SX505NT pre-grafted base is mixed with a crosslinking catalyst masterbatch CM493 or CM497, in the ratio 95:5. The SX505NT:CM493 or SX505NT:CM497 systems have passed type-tests for use up to and including 36 kV. The graft compound contains a non-staining stabilizer and an effective tree retarder, giving outstanding long term retention of dielectric strength. This compound is typically used in conjunction with crosslinkable semi-conducting material for conductor and insulation shields. Crosslinking is obtained by exposure to moist or hot water immersion only.
Elastomer Engineering
EPDM 70 B WRAS R1 [E6029]
Polymer Name:
Ethylene Propylene Diene Terpolymer (EPDM)
Density:
1180.0 - 1220.0 kg/m³
EPDM 70 B WRAS R1 [E6029] is an EPDM elastomer with good physical properties & meets the requirements of BS 6920-1:2000 and BS EN681-1 WA 70.
Show
36
of 211 results
1
2
3
4
5
6